Which Is The Best Water Cooling Rigid Tuning
Nowadays, there are so many products of water cooling rigid tuning in the market and you are wondering to choose a best one. You have searched for water cooling rigid tuning in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings water cooling rigid tuning which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Thermaltake Pacific DIY OD 16mm (5/8") x ID 12mm (1/2") Water Cooling PETG Hard Tube Bending Kit CL-W093-AL00BL-A
- Near Perfect Bends: Essential for making precise bends when using 16mm OD PETG tube
- Mandrels: Includes Mandrels for 45/90/180/360 degree bends
- Pipe Cutter: Professional Grade Pip Cutter provides perfect beveled edge cuts
- Insert: Silicone Tube insert prevents kinks and help promote smooth bends while keeping inner wall diameter
- Mounting: Pre-drilled holes allow easy mounting of mandrels to flat surface
- Recommended use of soapy water assists with tube insertion and tube heating
- Warranty: 2 Years
Thermaltake Pacific Black 4 Build-in O-Rings C-Pro G1/4 PETG 16mm OD Compression Fitting 6 Pack CL-W214-CU00BL-B
- Fitment Reimagined: This new concept makes it easier than ever to install custom hard tube liquid cooling loops
- Four Built in O rings: Maximum leak prevention, secure compression seal, and peace of mind
- Protection You Expect: Surface treated and a special coating finish provides increased durability and protection from corrosion
- Build It Your Way: Compatible with liquid cooling components that utilize G1/4 thread ports and 16mm OD PETG, Acrylic, and Copper hard tubing
- Exclusively Designed Open End Wrench is Included
The Pacific C-Pro Series is a revolution in fitment design. It simplifies the process of setting up a custom liquid-cooling loop and provides a seal that outperforms traditional compression fittings. By using 4 preinstalled O-rings and an overhauled design, the C-Pro Series is the new standard in fitment technology and it is exclusive to Thermaltake.
Model: Pacific C-Pro G1/4 PETG 16mm OD 6 Pack – Black
Dimension: D26 x 21 (H) (mm)
Applicable: OD : 16 mm
Weight : 320 g
Material: CU + AL
Screw Thread: G 1/4
Note: PETG Tube to G1/4
Similar items with 4 stars and above
EKWB EK-DuraClear Soft Tubing, 10/13mm (3/8" ID, 1/2" OD), 3 Meter, Clear
EK-DuraClear is the most advanced liquid cooling tubing, designed and manufactured for the most demanding customers, who want to use soft tubing in their builds. The EK-DuraClear structure is formulated to enable it to perform in a wide range of closed loop cooling systems, making it the top choice for every liquid cooling enthusiast.
Our top priority during the development of this tube was the prevention of bacterial growth on the tubing wall. To eliminate this problem, EK-DuraClear has very smooth inner walls that prevent any kind of bacterial adhesion. Tested in the most extreme environments, the EK-DuraClear is guaranteed to withstand far worse conditions that would ever appear in the everyday use.
One of the most important features that the soft tube should have is the flexibility and good bend ratio without kinks. EK-DuraClear has one of the best bend ratios on the market. Doing a tight turn in your liquid cooling build has never been easier! Tighter bends without kinking will allow you to have no reduction in cooling performance whatsoever.
Unlike the matte black EK ZMT Tube, EK-DuraClear is a transparent tube, designed to be used with EK-Ekoolant cooling liquids. Colored liquid realy gives your build a touch of personality and there is nothing more beautiful than matching colors of liquid with your hardware.
– Highly durable
– UV Resistant
– Logo Free (no print on tube)
– Inner Wall resilience
– Environmentally responsible, safe and non-toxic product
– Material: PVC
– Color: Clear, not UV-reactive (resistant to UVA & UVB)
– Length: 3 meters
– Operating temperature range: -20°C to 80°C
– Internal diameter (ID): 9,5 mm (3/8″)
– Outer diameter (OD): 12,7 mm (1/2″)
PrimoChill Rigid Tubing 45/90/180 Degree Water Cooling Bending Kit – 1/2 in. OD
Now making custom bends with rigid tubing could not be easier. With the PrimoChill Rigid Tubing 45/90/180 Degree Bending Kit – 1/2 in. OD you can make consistent bends every time! Once your tube is heated (PETG or Acrylic) you can mold the tube using this bending tool for angles of any size. These tool has mount holes that allow you to mount to a hard surface for a more permanent work station.
WarningsPractice using the bending tool on some scrap rigid until you get the hang of how best to use it!
PrimoChill is not responsible for any damage caused by or when using this product. Please use at your own risk.
PrimoChill RFB Rigid Tubing Finishing Bit – 10mm ID x 12mm OD
Are you constantly trying to deburr your rigid tube by hand? Stop hand cranking that cheap plastic reamer! The PrimoChill RFB (Rigid Finishing Bit) is a standard size drill bit with the power to save you time and energy while giving a perfectly finished tubing end. The RFB can be used at mid to low RPM to smooth out the end of your tube with no effort. Crank up the RPMs and you can customize the length of the tube as well. This functionality allows you to rough cut your rigid tube and then fine tune it to the perfect length with clean ends. Custom fitting your rigid tube is now so much easier!
Specifications:Tube Compatibility: 10mm x 12mm rigid tubing
Material Compatibility:PETG, PMMA (Due to extremely quick dulling of the bit, Copper tubing is not recommended.)
XSPC G1/4" to 10mm ID, 14mm OD Rigid Tubing Fitting (for use with XSPC Metal & PETG Tubing Only), Matte Black, 6-Pack
XSPC Rigid Tubing Fittings are designed for 14mm PETG tubing and 14mm metal tubing. The fittings have two push seals and an additional compression seal for a safe and secure connection. Only for use with XSPC 14mm PETG and Rigid Tubing Fittings.
Similar items with 4 stars and above
Thermaltake Pacific DIY LCS Black G1/4 PETG 16mm (5/8") OD Tube 90 Degree Compression Fitting Cooling CL-W097-CA00BL-A
- High flow Leak free design: the fittings allow proper connection to G1/4 Ports, Securing properly to cooling components while providing an even seal around the tubing
- Black coating brass fitting
- G 1/4″ port
- For PETG tubes: outer Diameter 5/8″ (16mm)
- 3 pre-installed O-Ring: prevent coolant from leaking
The Thermaltake Pacific PETG fittings provides a complete solution for enthusiast and custom PC builders to meet the needs of setting up a complete water cooling system. With G1/4″ durable copper fittings, finished in Black coatings, take every detail seriously. Make your system a showcase for all to see with High quality components from Thermaltake. 2 Year Warranty.
BXQINLENX 9 PCS PETG Tubing Cut and Bending Tool kit OD 14MM ID 10MM (9 PCS)
- LENX 9 PCS PETG Tubing cut and bending tool kit
- The saw is works for acrylic tube,please not the acrylic tube can’t be cut.
- White silicone tube OD 9.2MM just works for ID 10MM PETG Tubing.
- Bending tool work for OD 14MM ID 10MM PETG Tubing.
- Sold by LENX
LENX 9 PCS PETG Tubing cut and bending tool kit
3.3 pcs 45° 90° 180° PETG Bending Tool
4.2 pcs Bending Rubber
5.PETG Chamfer Tool
Thermaltake Pacific DIY LCS Black G1/4 PETG 16mm (5/8") OD Tube 90 Degree Dual Compression Fitting Cooling – CL-W099-CA00BL-A
- High Flow Leak Free Design: The fittings allow proper connection to G1/4 ports, securing properly to cooling components while providing an even seal around the tubing
- Black Coating Brass Fitting
- G 1/4″ Port
- For PETG Tubes: Outer Diameter 5/8″ (16mm)
- 6 Pre-installed O-Ring: Prevent coolant from leaking
The Thermaltake Pacific PETG Fittings provides a complete solution for enthusiast and custom PC builders to meet the needs of setting up a complete water cooling system. With G1/4″ durable copper fittings, finished in black coatings, take every detail seriously. Make your system a showcase for all to see with high quality components from Thermaltake. 2 Year Warranty.
By our suggestions above, we hope that you can found water cooling rigid tuning for you.Please don’t forget to share your experience by comment in this post. Thank you!
Best water cooling rigid tuning: Top-Rated Brands & What to Buy