Best Water Cooling Block For 1080 Ti

EK-FC1080 GTX Ti FTW3 RGB is a high-performance full-cover water block for EVGA GeForce GTX 1080 Ti FTW3 based graphics cards, based on NVIDIA Pascal architecture (GP102). The water block comes with pre-installed 4-pin 12V RGB LED strip. This water block directly cools the GPU, RAM, and VRM (voltage regulation module) as water flows directly over these critical areas thus allowing the graphics card and it’s VRM to remain stable under high overclocks. EK-FC1080 GTX Ti FTW3 RGB water block features a central inlet split-flow cooling engine design for best possible cooling performance, which also works flawlessly with reversed water flow without adversely affecting the cooling performance. This kind of efficient cooling will allow your high-end graphics card to reach higher boost clocks, thus providing more performance during gaming or other GPU intense tasks. Moreover, such design offers great hydraulic performance allowing this product to be used in liquid cooling systems using weaker water pumps. The base of the block is CNC machined out of nickel-plated electrolytic copper while the top is CNC machined out of high-quality acrylic material. The sealing is ensured by quality rubber O-rings. Screw-in brass standoffs are pre-installed and allow for safe, painless installation procedure. This product is compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 4-pin LED connector is to be aligned with the +12V marking on the RGB header. EKWB recommends the purchase of aesthetic retention backplate which improves the looks of your graphics cards and also provides some passive cooling to the circuit board VRM section. The EK-FC1080 GTX Ti FTW3 RGB water block is compatible with EK-FC1080 GTX Ti FTW3 Backplates and the factory EVGA backplate as well.

Model: 3830046996466

Backplate is just for showcase and it is not included! This product should NOT be installed with any aluminum Fluid Gaming parts EK-FC1080 GTX Ti TF6 is a high-performance full-cover water block for MSI GEFORCE GTX 1080 Ti based graphics cards, based on NVIDIA Pascal architecture (GP102). Please check our Cooling Configurator online compatibility system for detailed compatibility list! This water block directly cools the GPU, RAM, and VRM (voltage regulation module) as water flows directly over these critical areas thus allowing the graphics card and it’s VRM to remain stable under high overclocks. EK-FC1080 GTX Ti TF6 water block features a central inlet split-flow cooling engine design for best possible cooling performance, which also works flawlessly with reversed water flow without adversely affecting the cooling performance. This kind of efficient cooling will allow your high-end graphics card to reach higher boost clocks, thus providing more performance during gaming or other GPU intense tasks. Moreover, such design offers great hydraulic performance allowing this product to be used in liquid cooling systems using weaker water pumps. The top also features two pre-drilled slots for 3mm diodes. The sealing is ensured by quality rubber washers. Screw-in brass standoffs are pre-installed and allow for safe, painless installation procedure. The factory backplate of the MSI GeForce GTX 1080 Ti Gaming 11G and MSI GeForce GTX 1080 Ti Gaming X 11G graphics cards is compatible with this water block. G1/4″ threaded fittings can be used on both sides of the FC terminal. Up to four EK-FC1080 GTX Ti TF6 water blocks can be used on a single ATX form factor motherboard by using EK-FC Terminal (DUAL, TRIPLE or QUAD type) system or other means of interconnectivity. Please note that the old EK-FC Bridge & Link system is not compatible with this water block.

100% new, fine workmanship, simple sense is very strong!
N-GV1080TIXT-Xfor Pcasl Gigabyte AORUS GTX 1080 Ti Xtreme Edition design,please confirm before buying graphics specific specifications, to ensure the compatibility of water cooling block. Water cooling block is designed using 0.2 MM micro channel injection, all designed for performance! Core (GPU), direct cooling graphics memory (RAM), as well as the graphics card power supply (VRM) these hot key parts of the graphics card, to ensure that the players and the stability of the overclocking, maintain a good temperature. Graphics using large water flow design, even if the hm weaker pump can meet the demand.
Water cooling block at the bottom of the use of high purity copper manufacturing, and electroplating processing to prevent oxidation, more make water head of delicate and beautiful. Cover the use of high-quality POM material or imported acrylic materials, ensure the service life of water head and durability. Sealing material using a high standard of sealing ring resistance to ageing of fatigue, ensure the sealing water cooling block.
Video card water cooling block is free to change direction, convenient players form a SLI&CF firefight system, can be in series or in parallel.
parts list:
fast twist(9.5*12.7 (3/8)) X 2
plugs X 2
grease and thermal paste X 1
mounting screws X 1
Compatible graphics card type: Gigabyte AORUS GTX 1080 Ti Xtreme Edition
Compatible graphics card type: Gigabyte AORUS GTX 1080 Ti 11G
NOTE:Before buying, please contact the seller, the GPU WATER COOLING BLOCK compatible models, factory often modify graphics PCB, so in order to avoid after the purchase is not compatible .

The Corsair Hydro x series XC7 RGB CPU water block combines premium construction, vivid RGB lighting and extreme cooling performance. A precision machined nickel-plated copper cold plate and more 60 high-efficiency micro-cooling fins draw the maximum amount of heat from your CPU, dropping temperatures and letting you push your clock speeds to their maximum. A transparent flow chamber shows off your coolant in all its glory, lit by 16 individually addressable RGB LEDs for 360° of customizable RGB lighting, controlled by adding a Corsair lighting Node Pro or Commander Pro. Powered by Corsair iCUE software to deliver nearly limitless lighting customization and control, the XC7 is ready to become to become the centerpiece of your custom cooling system. Tech Support # 1-888-222-4346 opt #1

The world-renowned manufacturer, Alphacool, offers the Eisblock GPX a very noble and high-quality full cover water cooler for your graphics card. The Eisblock GPX is available in two versions; An eye-catching version with a plexiglass window with RGB lighting to really show off or a simple but elegant version made of acetal. Both coolers are based on an identical copper heat sink, which is completely nickel-plated. The surface area where the water flows is very large, so that all components that give off heat are actively cooled with water which increases performance. The 35 fins of the cooler are only 0.6 mm thick and cover even large GPUs completely. The large cooling surface is also ideal for graphics cards with HBM memory. Backplates for both cooler variants are included, but they differ significantly. The acetal version uses a classic backplate coated with fins for better cooling. The plexi version of the Eisblock GPX water cooler uses a smooth backplate, which together with the cooler encloses the entire PCB. This makes the cooler and graphics card look like a single unit rather than a front and back plate. The SLI connector on Nvidia graphics cards is protected by a screwed cap, which can be removed if necessary. The optical highlight of the Plexi variant, besides the very large window, of course also the complete and integrated RGB lighting. This is compatible with ASUS Aurora Sync, Biostar VIVID LED DJ, Gigabyte RGB Fusion or MSI Mystic. But pay attention to the connection on your mainboard. You may need a Male-to-Female adapter for some motherboards. With the Alphacool EisBlock GPX full cover water cooler for your graphics card you get a high-quality cooler with excellent cooling performance. You have the choice between a simple but noble black acetal version or a striking, wonderfully illuminated and chic plexi version with a large viewing window. Compatible with Nvidia Titan X (Pascal) / 1080Ti Founder’s Edition GPU cards.

Model: 11568

EK-FC GeForce GTX FE is a high-performance full-cover water block for multiple NVIDIA GeForc GTX and Titan X (Pascal) based graphics cards. This water block directly cools the GPU, RAM, and VRM (voltage regulation module) as water flows directly over these critical areas thus allowing the graphics card and it’s VRM to remain stable under high overclocks. EK-FC GeFroce GTX FE water block features a central inlet split-flow cooling engine design for best possible cooling performance, which also works flawlessly with reversed water flow without adversely affecting the cooling performance. This kind of efficient cooling will allow your high-end graphics card to reach higher boost clocks, thus providing more performance during gaming or other GPU intense tasks. Moreover, such design offers great hydraulic performance allowing this product to be used in liquid cooling systems using weaker water pumps. The base of the block is made of nickel-plated electrolytic copper while the top is made of quality acrylic material. The top also features two pre-drilled slots for 3mm LEDs. The sealing is ensured by quality rubber washers. Screw-in brass standoffs are pre-installed and allow for safe, painless installation procedure. The EK-FC GeForce GTX FE water block is backward compatible with all EK-FC1080 GTX Backplates, EK-FC1080 GTX Ti Backplates, and EK-FC Titan X Pascal Backplates. G1/4″ threaded fittings can be used on both sides of the FC terminal. Up to four EK-FC GeForce GTX FE water blocks can be used on a single ATX form factor motherboard by using EK-FC Terminal (DUAL, TRIPLE or QUAD type) system or other means of interconnectivity. Please note that EK-FC Bridge & Link system is not compatible with this water block. The EK-FC GeForce GTX FE water block is compatible with all reference design GeForce GTX 1060, GeForce GTX 1070, GeForce GTX 1080, GeForce GTX 1080 Ti, GeForce Titan X Pascal and GeForce Titan Xp based graphics cards.

Model: 3831109831977

Thermaltake Pacific v-gtx 10 series founders Edition transparent water block is a full cover water block including an aluminum alloy back plate. Compatible with NVIDIA GeForce GTX 1080/1070 fe models, deliver the ultimate in cooling performance. Featuring 0.5mm internal fin construction, the Pacific v-gtx 10 series is manufactured with cnc machined copper base, nickel plating for ideal protection and supporting G1/4 threaded fittings. Included hardware supports users for easy installation. See the true power of liquid cooling with the Thermaltake Pacific GTX 10 series GPU water block.

100% new, fine workmanship, simple sense is very strong!
BS-ZO1080TM-PA for Pcasl ZOTAC GeForce GTX 1070Ti Mini design,please confirm before buying graphics specific specifications, to ensure the compatibility of water cooling block.
Water cooling block is designed using 0.2 MM micro channel injection, all designed for performance! Core (GPU), direct cooling graphics memory (RAM), as well as the graphics card power supply (VRM) these hot key parts of the graphics card, to ensure that the players and the stability of the overclocking, maintain a good temperature.
Graphics using large water flow design, even if the hm weaker pump can meet the demand.
Water cooling block at the bottom of the use of high purity copper manufacturing, and electroplating processing to prevent oxidation, more make water head of delicate and beautiful. Cover the use of high-quality POM material or imported acrylic materials, ensure the service life of water head and durability. Sealing material using a high standard of sealing ring resistance to ageing of fatigue, ensure the sealing water cooling block.
Video card water cooling block is free to change direction, convenient players form a SLI&CF firefight system, can be in series or in parallel.
parts list:
fast twist (3/8ID*1/2OD) X 2
plugs X 2
grease and thermal paste X 1
mounting screws X 1
RGB LED X 1

Compatible graphics card type: ZOTAC GeForce GTX 1070Ti 8GB Mini
NOTE:This version of the graphics card has three versions, 1080Ti MINI-V2-X/1080Ti MINI-V3-X and 1080Ti MINI-V4-X. If you do not know which version of your graphics card, please send the video card URL or send The graphics card PCB is confirmed to us to avoid the purchase of the wrong product and the GPU BLOCK cannot be installed.

1. Block with 0.5mm micro channel injection design, all designed only for performance!
2. Block using large flow design, even if low raise pump can use it.
3. Block made by high purity copper, and electroplating to prevent oxidation and makes beautiful.
4. Inlet and outlet can change direction free.
Tips:
1. Please double check the graphics card detail model to ensure compatibility. Please feel free to contact us if you are not very sure.
2.2pcs G1/4 3/8″ ID 1/2″ OD Silver Compression Fittings are included, instead of the ones in the pictures.
3. Prohibit the use of alcohol containing coolant.
4. Graphics card block installation requires a certain skill and experience, because the graphics card manufacturing tolerances may have a certain impact on the block installation, we can assist buyers to solve such problems, but this can not be the basis of returns.
Compatible:AMD Radeon RX 5700 XT
Compatible:AMD Radeon RX 5700
Compatible:Dataland RX 5700 XT
Compatible:Dataland RX 5700
Compatible:ASRock RX 5700 XT 8G
Compatible:ASRock RX 5700 8G
Compatible:Sapphire RX 5700 XT
Compatible:Sapphire RX 5700
Compatible:Asus RTX 5700XT 8G
Compatible:Asus RTX 5700 8G

Conclusion

By our suggestions above, we hope that you can found water cooling block for 1080 ti for you.Please don’t forget to share your experience by comment in this post. Thank you!