minmommy 
Nowadays, there are so many products of makerfocus brushless cooling fan in the market and you are wondering to choose a best one. You have searched for makerfocus brushless cooling fan in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings makerfocus brushless cooling fan which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
MakerFocus 2pcs Raspberry Pi DC Brushless Cooling Fan Heatsink Cooler Radiator Connector Separating One-to-Two Interface 3.3V 5V for Raspberry Pi 2/ Pi 3/3B+ and Pi Zero/Zero W or Other Robot Project
- √. Installation Screws Included: Don’t need to purchase screws by yourself. Intimate service, easy to install!
- √. Super Quiet: This fan will not make you feel uneasy during they are working, but also a quiet experiment environment for you. Perfect Cooling Tool: Allows your Raspberry Pi or other experimental tools to quickly dissipate heat and will extend the working life of your Pi or other development boards!
- √. Unique Terminal Interface: It with two terminals, Its connector is separating, One-to-Two interface, can choose 3.3V or 5V. According to the voltage requirements in accordance with your needs to choose which to use
- Working voltage: 3.0-5.8V
- Current: 0.18A. Air volume: 5 m³/ h
- Number of revolutions: 13200RPM.
- √. Suitable for A Variety of Products: Pi fan, Raspberry Pi zero w heatsink, suitable for Raspberry Pi 2/ Pi 3/3B+ and Pi Zero/Zero W, Retroflag NESPi case and Nespi Case. Not only using them for Raspberry Pi but also for cooling of a desert traversing robot project. It just another addition to them fleet. Will works wonderfully!
- √. Strong After-sales Service Team: As long as you have any questions about the product, we will resolve your issue immediately if received your email, your satisfactory purchase experience is our greatest hope! How to email us? Plz click “MakerFocus” and click “Ask a question” to email us! Looking forward to your consultation!
2pcs Raspberry Pi DC Brushless Cooling Fan Heatsink Cooler Radiator Connector Separating One-to-Two Interface 3.3V 5V for Raspberry Pi 2/ Pi 3/3B+ and Pi Zero/Zero W
Features:
This Pi fan not only support Raspberry Pi 2/ Pi 3/3B+ and Pi Zero/Zero W, but compatible with other development board.
Its connector is separating, One-to-Two interface, can choose 3.3V or 5V.
Rated voltage: DC5V
Working voltage: 3.0-5.8V
Current: 0.18A
Air volume: 5 m³ / h
Number of revolutions: 13200RPM
Noise: 18 dB
Package Including
2 * pi fan
8 * nuts M2.5
8 * screw M2.5 * 14mm
MakerFocus 2pcs Raspberry Pi 4B Fan DC Brushless Cooling Fan 3.3V 5V Heatsink Cooler Radiator Connector Separating One-to-Two Interface for Raspberry Pi 4/ Pi 3/3B+ and Pi Zero/Zero W or Other Project
- √ Installation Screws Included: Don’t need to purchase screws by yourself. Intimate service, easy to install!
- √ Super Quiet: This fan will not make you feel uneasy during they are working, but also a quiet experiment environment for you. Perfect Cooling Tool: Allows your Raspberry Pi or other experimental tools to quickly dissipate heat and will extend the working life of your Pi or other development boards!
- √ Unique Terminal Interface: It with two terminals, Its connector is separating, One-to-Two interface, can choose 3.3V or 5V. According to the voltage requirements in accordance with your needs to choose to use
- Working voltage: 3.0-5.8V
- Current: 0.18A. Air volume: 5m³ / h
- Number of revolutions: 13200RPM.
- √ Suitable for A Variety of Products: Pi fan, Raspberry Pi zero w heatsink, suitable for Raspberry Pi 4B/ Pi 3/3B+ and Pi Zero/Zero W, Retro-flag NES-Pi case and Nes-pi Case. Not necessarily using them for Raspberry Pi but rather for cooling of a desert traversing robot project. It just another addition to them fleet. Will works wonderfully!
- √ Strong After-sales Service Team: As long as you have any questions about the product, we will resolve your issue immediately if received your email, your satisfactory purchase experience is our greatest hope! How to email us? Plz click “MakerFocus” and click “Ask a question” to email us! Looking forward to your consultation!
MakerFocus 2pcs Raspberry Pi DC Brushless Cooling Fan Heatsink Cooler Radiator Connector Separating One-to-Two Interface 3.3V 5V for Raspberry Pi 4/ Pi 3/3B+ and Pi Zero/Zero W or Other Robot Project
Features:
This Pi fan not only support Raspberry Pi 2/ Pi 3/3B+ and Pi Zero/Zero W, but compatible with other development board.
Its connector is separating, One-to-Two interface, can choose 3.3V or 5V.
Rated voltage: DC5V
Working voltage: 3.0-5.8V
Current: 0.18A
Air volume: 5m³ / h
Number of revolutions: 13200RPM
Noise: 18 dB
Package Including
2 * pi fan
8 * nuts M2.5
8 * screw M2.5 * 14mm
MakerFocus 4pcs Raspberry Pi 4B Fan DC Brushless Cooling Fan 3.3V 5V Heatsink Cooler Radiator Connector Separating One-to-Two Interface for Raspberry Pi 4/ Pi 3/3B+ and Pi Zero/Zero W or Other Project
- √ Installation Screws Included: Don’t need to purchase screws by yourself. Intimate service, easy to install!
- √ Super Quiet: This fan will not make you feel uneasy during they are working, but also a quiet experiment environment for you. Perfect Cooling Tool: Allows your Raspberry Pi or other experimental tools to quickly dissipate heat and will extend the working life of your Pi or other development boards!
- √ Unique Terminal Interface: It with two terminals, Its connector is separating, One-to-Two interface, can choose 3.3V or 5V. According to the voltage requirements in accordance with your needs to choose to use
- Working voltage: 3.0-5.8V
- Current: 0.18A. Air volume: 5m³ / h
- Number of revolutions: 13200RPM.
- √ Suitable for A Variety of Products: Pi fan, Raspberry Pi zero w heatsink, suitable for Raspberry Pi 2/ Pi 3/3B+ and Pi Zero/Zero W, Retroflag NESPi case and Nespi Case. Not necessarily using them for Raspberry Pi but rather for cooling of a desert traversing robot project. It just another addition to them fleet. Will works wonderfully!
- √ Strong After-sales Service Team: As long as you have any questions about the product, we will resolve your issue immediately if received your email, your satisfactory purchase experience is our greatest hope! How to email us? Plz click “MakerFocus” and click “Ask a question” to email us! Looking forward to your consultation!
4pcs Raspberry Pi DC Brushless Cooling Fan Heatsink Cooler Radiator Connector Separating One-to-Two Interface 3.3V 5V for Raspberry Pi 2/Pi 3/3B+ and Pi Zero/Zero W or Other Robot Project
Features:
This Pi fan not only support Raspberry Pi 2/ Pi 3/3B+ and Pi Zero/Zero W, but compatible with other development board.
Its connector is separating, One-to-Two interface, can choose 3.3V or 5V.
Rated voltage: DC5V
Working voltage: 3.0-5.8V
Current: 0.18A
Air volume: 5m³ / h
Number of revolutions: 13200RPM
Noise: 18 dB
Package Including:
4 * pi fan
16 * nuts M2.5
16 * screw M2.5 * 14mm
Similar items with 4 stars and above
Fugetek 12V DC Brushless Blower Cooling Fan, HT-07530D12, 75x75x30mm, 2pin, Dual Ball Bearing, Computer Fan, Multi Use, Black, US Support
- This fan is made of special and premium materials for the Fugetek FG-637, 647 and FG-857 projectors. It is high temperature resistant and extremely durable.
- Dual Ball bearing. Genuine NSK or NMB balls made in Japan. Guaranteed to continuously run 50,000 hours under normal temperature. Speed: 3500 RPM
- Rated Voltage: 12 V
- Noise Level : 42 dba
- Dimensions:: 75x75x30mm
- 2.95×2.95×1.18″
- Lead wire:UL Type (+):Red (-):Black. This is a two wire blower.
Universal 12v DC Brushless Blower Cooling Fan – Dual Ball Bearing
General Specifications:
Frame: Plastic 94V-0
Impeller: Plastic 94V-0
Lead wire: UL Type (+):Red (-):Black
Operation Temperature: -10℃~ 70℃
Motor Protection: Impedance Protected
Reverse Polarity Protected
Model No: HT 07530
Rated Voltage (VDC): 12
Speed Type: H, M, L
Rated Current (A): 0.30, 0.16, 0.12
Rated Speed _RPM): 3500, 3000, 2500
Air Flow (CFM): 12.02, 9.40, 7.81
Air Pressure (mmAg): 16.81, 9.30, 5.96
Customer Support from our Houston,Tx office. If you have any questions, feel free to call us.
GDSTIME 80mm x 80mm x 25mm 12V Brushless DC Cooling Fan
- Dimension of outer the frame is 80mm(L) x 80mm(W) x 25mm(H) / The size of fan in inch is 3.15in(L) x 3.15in(W) x 1in(H)
- The center to center distance beween the mountiong holes is 71.5mm/2.81in.
- Operating Voltage Range：5.5V to 13.8V. (overtake to 13.8V, it can also work. but not safe, and seriously affects lifespan of fan.)
- Rated Voltage: DC 12V
- Rated Current: 0.2 Amp
- Rated Speed: 2800 RPM
- Air flow: 43.6CFM
- Noise:31dBA
- Power: 2.1Watt
- Connector: XH2.54-2Pin
- Lead wire: UL Type (+): Red wire
- (-): Black wire. This is a two wire cooling fan
- Bearing Type: Sleeve Bearing
- Life: working up to 35000h at 25 degrees.
- Please Comfirm the Fan Size, Voltage, Connector and other parameters before purchase.
Conclusion
By our suggestions above, we hope that you can found makerfocus brushless cooling fan for you.Please don’t forget to share your experience by comment in this post. Thank you!
