Which Is The Best Heating Pad Cpu

Main Features:
thermal pad has 6.0 W/m K Thermal Conductivity, Used to fill the gap between the heating element and the Heatsink, Achieve the best cooling effect,
At the same time, the thermal pad also has Insulation, Non-conductive, wear-resistant, fire-retardant, compression, buffering, no damage to metal materials, etc effect.

Why use thermal silicone Pad ?
1) The main purpose of the choice of Thermal Pad is to reduce the heat source surface and the heat dissipation device contact surface between the contact thermal resistance,
Thermal conductivity of silicone Pad can be good filling the gap between the contact surface;
2) because the air is hot bad conductor, will seriously hinder the heat transfer between the contact surface,
And in the heat source and the radiator between the installation of thermal silica Pad can be out of the air contact surface;
3) with thermal silicone Pad supplement, you can make the heat source and the heat sink between the contact surface better full contact,
Truly face to face contact in the temperature of the reaction can be achieved as small as possible temperature difference.

Applicable industry:
LED industry, automotive electronics industry, power industry, PDP/LED flat-panel TV,
communications industry, Industrial industry, household electrical appliance industry.

Scope Application:
electronic products, motherboard, motor, external pad and foot pad, electronic, appliances,high power LED lighting,Car machine,
power devices, automotive electronic modules (engine scrubber) Power modules,
high power power supplies, computer host (CPU, GPU, USICS, RDRAMTM, CD-ROM, IGPT module, hard drives) ,laptop and any electronic equipment needing to be filled with heat dissipation

Package included:
1* 200x200x0.5 mm Thermal Pad

Used for graphics cards, graphic chips and CPU chips.The thermal pad can lower greatly CPU temperature and solve most of the laptop heatsink problem.

Note: this is not a Shiatsu kneading massager with rolling balls; this is a vibration massager only. Enjoy a relaxing vibration massage at home, at the office or in the car with the Relaxzen 10-Motor Massage Cushion by Comfort Products. Whether on or off, the soft polyester fabric, plush polyurethane foam and large seating area (19″W x 18″D) add support and style to any seating environment. Whether at home or in the car, the 10-motor massage cushion is sure to hit trouble areas affected by the day’s stress by gently massaging the neck, upper and lower back, lumbar, and thighs all at once or by targeting those areas individually. Selecting the proper massage for your need is important; the large backlit controller allows the user to choose from 8 different intensities and speeds and also includes 5 pre-programmed massage modes. To release even more stress and tension, simply push the heat button to activate the heated lumbar area. With the included AC adaptor (home use) and DC adaptors (car use), use the cushion while at work and take it with you for the car ride home. Treat yourself or someone else with the Relaxzen 10-Motor Massage Cushion by Comfort Products.

Thermal conductive Gap pad
Size:200*200*0.5mm;
Color: Grey Quantity：1pcs
The Thermal Conductivity amounts to 4.5 W/mK.

You can according to the size of the gap between the heating element and the heat sink to select the appropriate thickness of the thermal silica Pad, the size of the self-cutting. Not electric conductive to prevent any electronic damage.

Wide range of applications: for LED industry applications, automotive electronics industry applications, power industry, PDP/LED flat-panel TV applications, communications industry, household electrical appliance industry. Electronic product heating device, electronic heating module, power supply heating body, LCD TV and computer peripheral RDRAMTM, CD-ROM, CPU, IGPT module and so on, and any equipment needing to be filled with heat dissipation.

Safe application: This product has good thermal conductivity and electrical insulation properties,good stability,wide use of temperature,in -50 ℃ -200 ℃ range does not melt,the goods no Toxic。

Use guide:
1.remove the old heat-conducting products of the radiator,and clean the surface of dirt and oil stains.
2.Determine the contact position of the chip and the radiator on the radiator, and cut the appropriate size.
3.Tear off the protective film on one side of the conductive silicone sheet Paste to the fixed radiator position.
4.And then tear off the other side of the protective film.
5.After installation to the radiator to exert certain pressure to make it close to the radiator surface

★ Feature:

➤ The pad is sticky,with good conduction,you can easily put it on IC Chipset and heatsink,you can also fix it on LED IC SMD DIP or eleswhere.

➤ You can freely match the appropriate thickness and size depending on the size of the gap between the heating element and the heat sink.

➤ Soft,good malleability,with a little viscosity.

➤ Strong insulation and Excellent performance.

➤ Provide a mess-free installation, maximum heat conduction and increased cooling.

➤ Reduce the effectiveness of your heatsink and raise the operating temperature of your processor/video card.

➤ With this copper pad to greatly lower gpu temperatures, can be used for graphics, northbridge,memory chipset,IC chips.

★ Specifications:

– Material: conduction silicone

– Color: Blue

– Size:10 mmx10 mm / Thickness: 1.0mm

– Thermal Conductivity: 1.5 W/m K

– Working temperature: -40~200 °C

★ Package Includes:

– 100PCS x thermal pad(10mm x 10mm x 1mm/pcs)

★We have professional R&D team, will continue to launch new products to meet customer needs and, thank you for your supporting!

(1) Strict Quality Control (100% Tested): In order to provide buyers with a pleasant shopping experience, YATENG each item has been carefully inspected and properly packed before sending out.

(2) Fast and Professional Service: We have professional after-sale service team, any questions or problems from buyers will be answered within 24 hours (Including holidays).

(3) 12 Months Warranty and 100% Money Back: We provide 12 months warranty service for all of the products we sell on Amazon, if you are not satisfied with our products, we can give you a 100% refund.

Specification:
Dimension: 20mm x 25m
Thickness: 0.2mm
Reinforcement Carrier : Fiberglass Mesh
Thermal Conductivity:1.5 W/m-k
Breakdown Voltage: 4KVAC
Thermal impedance : 0.3℃in2/w
Initial Adhesion: 1.3kg/inch
180°Adhesion power: >16 N/25mm
Heat Resistance: 120°C (long time), 180°C ( short time)
Applicable temperature range:-30~+120 °C

Application:
Electronics Components: IC、CPU 、MOS …….
LED、M/B、P/S 、Heat Sink 、LCD -TV 、Notebook PC 、PC、Telecom Device、Wireless Hub
DDR Module 、 DVD Applications 、 Hand-set Application

Features:
★ Good adhesion (Acrylic PSA)
★ Very good thermal conductivity
★ Soft and compressibility
★ Easy to assemble
★ Long lifetime working normal temperature(80-120℃ ) can work for a minimum of 5 years

Notes For Attention:
1.When using thermal conductive double-sided tape, keep the adhesive surface clean and dry.
2.After tearing off the heat-conductive double-sided tape to peel the paper, double-sided thermal tape is evenly pressed with your fingers (just a little strength).
3.The viscosity of the heat-conductive double-sided adhesive tape have initial viscosity and persistent viscosity, and at room temperature, it takes 72 hours
to achieve the maximum adhesive strength. That is, at the beginning of the sticky adhesive that is the initial viscosity to 40% of its maximum viscosity, persistent stickiness is stable over time.
4.In the paste process, the appropriate heating (60 ~ 70 ℃), will greatly contribute to the effective increase in the area of adhesive, and as soon as possible to achieve maximum adhesion.
In the lower temperature of the winter, it’s little tips that heating to increase the viscosity of the heat-conductive double-sided tape when using the thermal conductive tape.

Package included:
1 Roll Thermal Conductive Double-sided Tape

Package include: 1pcs thermal conductive pad
Dimensions: 100x100mm
Thickness:1.0mm
Thermal Conductivity: 2.0(W/m-k)
Color: Blue
Weight:19.8g or 0.7oz

Conclusion

By our suggestions above, we hope that you can found heating pad cpu for you.Please don’t forget to share your experience by comment in this post. Thank you!