Which Is The Best Water Cooling Rigid Tuning

The Pacific C-Pro Series is a revolution in fitment design. It simplifies the process of setting up a custom liquid-cooling loop and provides a seal that outperforms traditional compression fittings. By using 4 preinstalled O-rings and an overhauled design, the C-Pro Series is the new standard in fitment technology and it is exclusive to Thermaltake.

P/N: CL-W214-CU00BL-B

Model: Pacific C-Pro G1/4 PETG 16mm OD 6 Pack – Black

Dimension: D26 x 21 (H) (mm)

Applicable: OD : 16 mm

Weight : 320 g

Material: CU + AL

Screw Thread: G 1/4

Note: PETG Tube to G1/4

EK-DuraClear is the most advanced liquid cooling tubing, designed and manufactured for the most demanding customers, who want to use soft tubing in their builds. The EK-DuraClear structure is formulated to enable it to perform in a wide range of closed loop cooling systems, making it the top choice for every liquid cooling enthusiast.

Our top priority during the development of this tube was the prevention of bacterial growth on the tubing wall. To eliminate this problem, EK-DuraClear has very smooth inner walls that prevent any kind of bacterial adhesion. Tested in the most extreme environments, the EK-DuraClear is guaranteed to withstand far worse conditions that would ever appear in the everyday use.

One of the most important features that the soft tube should have is the flexibility and good bend ratio without kinks. EK-DuraClear has one of the best bend ratios on the market. Doing a tight turn in your liquid cooling build has never been easier! Tighter bends without kinking will allow you to have no reduction in cooling performance whatsoever.

Unlike the matte black EK ZMT Tube, EK-DuraClear is a transparent tube, designed to be used with EK-Ekoolant cooling liquids. Colored liquid realy gives your build a touch of personality and there is nothing more beautiful than matching colors of liquid with your hardware.

Features:
– Highly durable
– Transparent
– UV Resistant
– Logo Free (no print on tube)
– Inner Wall resilience
– Environmentally responsible, safe and non-toxic product

Technical Specifications:
– Material: PVC
– Color: Clear, not UV-reactive (resistant to UVA & UVB)
– Length: 3 meters
– Operating temperature range: -20°C to 80°C

Dimensions:
– Internal diameter (ID): 9,5 mm (3/8″)
– Outer diameter (OD): 12,7 mm (1/2″)

Model: 3831109850961

Now making custom bends with rigid tubing could not be easier. With the PrimoChill Rigid Tubing 45/90/180 Degree Bending Kit – 1/2 in. OD you can make consistent bends every time!  Once your tube is heated (PETG or Acrylic) you can mold the tube using this bending tool for angles of any size.  These tool has mount holes that allow you to mount to a hard surface for a more permanent work station.
Features

Specifications
Compatibility

Parts Included

Warnings
Practice using the bending tool on some scrap rigid until you get the hang of how best to use it!
PrimoChill is not responsible for any damage caused by or when using this product. Please use at your own risk.

Are you constantly trying to deburr your rigid tube by hand? Stop hand cranking that cheap plastic reamer! The PrimoChill RFB (Rigid Finishing Bit) is a standard size drill bit with the power to save you time and energy while giving a perfectly finished tubing end. The RFB can be used at mid to low RPM to smooth out the end of your tube with no effort. Crank up the RPMs and you can customize the length of the tube as well. This functionality allows you to rough cut your rigid tube and then fine tune it to the perfect length with clean ends. Custom fitting your rigid tube is now so much easier!
Specifications:
Tube Compatibility: 10mm x 12mm rigid tubing
Material Compatibility:PETG, PMMA (Due to extremely quick dulling of the bit, Copper tubing is not recommended.)

XSPC Rigid Tubing Fittings are designed for 14mm PETG tubing and 14mm metal tubing. The fittings have two push seals and an additional compression seal for a safe and secure connection. Only for use with XSPC 14mm PETG and Rigid Tubing Fittings.

Model: TR-5060175589682-6P

The Thermaltake Pacific PETG fittings provides a complete solution for enthusiast and custom PC builders to meet the needs of setting up a complete water cooling system. With G1/4″ durable copper fittings, finished in Black coatings, take every detail seriously. Make your system a showcase for all to see with High quality components from Thermaltake. 2 Year Warranty.

LENX 9 PCS PETG Tubing cut and bending tool kit

Package:
1.Cutter
2.Saw
3.3 pcs 45° 90° 180° PETG Bending Tool
4.2 pcs Bending Rubber
5.PETG Chamfer Tool
6.File

The Thermaltake Pacific PETG Fittings provides a complete solution for enthusiast and custom PC builders to meet the needs of setting up a complete water cooling system. With G1/4″ durable copper fittings, finished in black coatings, take every detail seriously. Make your system a showcase for all to see with high quality components from Thermaltake. 2 Year Warranty.

Conclusion

By our suggestions above, we hope that you can found water cooling rigid tuning for you.Please don’t forget to share your experience by comment in this post. Thank you!