Best Liquid Cooling Threadripper

The Floe Riing RGB 360 TT Premium Edition is the world’s first 16.8 million colors liquid CPU cooler with three 120mm Riing Plus RGB fans and a LED waterblock. This cooler series features its extraordinary performance and superior quality. The large surface radiator plus high-performance waterblock and pump guarantees ultimate CPU cooling. Besides, the waterblock and the fans are manufactured with multiple addressable LEDs that can be controlled by Riing Plus RGB Software. Functions within the software also allow users to monitor fan performance and track CPU temperature. Enjoy better cooling performance and greater CPU protection with one simple upgrade!

Compatibility:
Intel LGA 2066/2011-3/2011/1366/1156/1155/1151/1150
AMD AM4/FM2/FM1/AM3+/AM3/AM2+/AM2
Water Block: Material:Copper
Pump:
Rated Voltage:12 V/ 5V
Rated Current:0.325 A / 0.4A
Motor Speed:3600 R.P.M

Fan
Dimension:120 x 120 x 25 mm
Speed:500~1400RPM
Noise Level:19.8 ~ 24.7 dB-A
Rated Voltage:12 V
Max. Air Flow:14.2~42.34 CFM
Max. Pressure:0.17~1.54 mm-H2O
Connector:5 pin

Tube
Length:326 mm
Material:Rubber
Weight 1610g

Radiator: Dimension:393 x 120 x 27 mm

Compatibility:
Intel LGA 2066/2011-3/2011/1366/1156/1155/1151/1150
AMD TR4/AM4/FM2/FM1/AM3+/AM3/AM2+/AM2
*AIO Cooler bracket adapter comes in the AMD Threadripper CPU box. For Android – Requires Android 6.0.0 or later with screen resolution 1920 x 1080

The Wraith ripper is a product developed through an exclusive collaboration between Cooler Master and AMD. The Master Fan Pro 120 servo, seven copper heat pipes Air cooler is designed to keep the AMD’s 2nd generation Ryzen Thread ripper CPUs cool under any computing condition. The dual tower heatsink covers more surface area. Creating a more effective way of dissipating heat.

The EK-FC Radeon VII water block with nickel plated cooling plate and acetal top directly cools the GPU, memory and VRM as liquid is channeled directly over these critical areas. These newly developed water blocks feature a redesigned cooling engine that has a larger footprint compared to the previous generation of EK Full Cover water blocks. This results in a larger surface area for heat transfer which increases the thermal performance.

The EK Vector Series water blocks use an Open Split-Flow cooling engine design which proved to be a superior solution for GPU water blocks. It is characterized by low hydraulic flow restriction, which means that it can be used with weaker water pumps, or pumps running on low-speeds and still achieve top performance. The jet plate and fin structure geometry have been optimized to provide even flow distribution with minimal losses and optimal performances even when used in reversed water flow scenarios.

The base of the block is made of nickel-plated electrolytic copper while the top is made of high-quality acrylic. Sealing is ensured by high-quality EPDM O-Rings. The front corner piece is lit up with LED strip.

This product is compatible with popular RGB sync technologies from all major motherboard manufacturers.

G1/4″ threaded fittings can be used on both sides of the FC terminal.

Enclosed:
– EK-FC Radeon VII series water block
– Mounting mechanism with screw-in brass standoffs
– Necessary mounting screws, nuts, and washers
– 2x EK plug G1/4”
– 6mm Allen key
– Thermal pads
– Thermal grease EK-TIM Ectotherm (1g)

PLEASE NOTE:

Fittings are just for show and are not included!
This product should NOT be installed with any aluminum Fluid Gaming parts!
Radeon VII stock backplates are compatible with EK-Vector Radeon VII water blocks only if installed with the stock backplate screws.

Model: 3831109816165

EX2-1055 is an ambient liquid cooling system designed with features for computer cooling. This model contains a triple x 120mm fan aluminum radiator, providing roughly 900W of cooling with a 25°C ambient delta. Just add tubing, fittings, coolant, and connect to your cold plate(s).

• Cooling capacity: 900W (3071BTU/hr) with 25°C liquid-ambient delta @ 4.5LPM
• Radiator fan speed: automatic based on temperature, or 10 manual levels
• Pump: 10 manual levels, up to 4.5LPM (1.2GPM)
• Adjust audio alarm based on 3 included temperature sensors
• Relay trigger can be configured as NO or NC and adjusted based on temperature
• Power input: 12VDC (via computer Molex plug), or 110/220VAC with separate adapter
• Reservoir capacity: 142mL (4.8 fl oz)
• G 1/4 BSPP threads on back for fittings

Additional Specifications

• Flow Rate: 4.5LPM (1.2GPM)
• Radiator: Aluminum, 3 x 120mm fans
• Display Type: LED
• Temperature Sensors: 10K Thermistors
• Power Source: 12 VDC (110/220 VAC with Separate Adapter)
• Noise (dBA): 34-46
• Max Temperature: 60°C (140°F)
• Max Pressure @ 25°C: 1.5kgf/cm2 (21.3psi)
• Cooling Capacity: 900W (3071BTU/hr) @ 25°C liquid-ambient (25°C dT)
• Max Power Consumption: 30W
• Fitting Thread: G 1/4 BSPP

Conclusion

By our suggestions above, we hope that you can found liquid cooling threadripper for you.Please don’t forget to share your experience by comment in this post. Thank you!