minmommy 
Nowadays, there are so many products of yamaha water fuel separator filter assembly in the market and you are wondering to choose a best one. You have searched for yamaha water fuel separator filter assembly in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings yamaha water fuel separator filter assembly which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
30,777 Reviews Scanned
Replacement S3213 Fuel Water Separator Filter Kit Assembly Boat Fuel Filter Marine Engine Fuel Water Separator for Mercury Yamaha Outboard 10 Micron
- BRAND:IVSPEED,Material:The filter is made of aluminum. Anti-oxidation/corrosion. Long service life.
- Include:IVSPEED S3213 assy,PTFE-tape,Memo Pad,Hose Clamp.Features:10 micron filters are over 90% efficient at removing particles as small as 10 microns. 10 micron filters are recommended to prevent damage to sensitive inboard, sterndrive and outboard fuel injection systems.
- Usage:Designed to trap the smallest particles and emulsified water from gasoline.
- Function:It contributes to clear contaminates protect fuel system.
- Water separating canisters:High performance 3/8 NPT ports offer lower pressure drop rates.
Replaces Mercury 35-60494-1 and Universal.
How use?
1.Before installing the filter, please check those Tubing and plugs,PTFE-tape is use to Prevent leaks from these plugs.
tips:1m PTFE-tape include.
2,install the plugs,Connect the fuel pipe and use the Hose Clamp to lock.
3.All of the above steps are very simple to operate, you can manually disassemble, and then use the tool to install tighten.
replace element:
1.Drain the unit by loosens the drain screw.
2.Loosen and remove the filter element.
Please ensure that the assembly is stable.
3.Loosen and remove the bowl from filter element.Please note the bowl is reusable,do not dispose unless broken.
(Professional tools may be required to remove bowls and filter element)
4.Wipe O-ring gland clean,and coat bowl’s sealing O-ring with clean oil or grease and place it back to the gland.The tighten the bowl onto filter element firmly by hand.
5.Coat filter element’s sealing O-ring with clean oil or grease and attach filter element onto filter head,and the tighten securely by hand.
6.Run engine and check for fuel leakage.
Instructions
To Drain Water:
1.off engine,Loosen drain screw to drain bowl of water.
2.Tighten drain screw.
3.Run engine and check for fuel leakage.
Warning:
Periodically check fittings and filter element for leaks.Be careful when changing fuel filter element .Gasoline is extremely flammable and highly explosive under certain conditions.Avoid spilling gasoline.Always stop engine and do not smoke or allow open flames in the area while changing filter element.
Tips:
replace element by tool
replace element at regular.
CHECK THE ELEMENT SUGGEST:EACH 7000KM/400 HOURS.
Package include:
1 IVSPEED S3213 assy
1*1M PTFE tape
1*Memo sticker for time or KM when use
2*Miniature Stainless Worm Gear Hose Clamp
1*Manual(some mode)
OEM Yamaha Outboard Stainless Fuel/Water Separating Filter Assy MAR-SPRTR-HD-SS
Yamaha Part #ABB-SPRTR-HD-SS
10-Micron Fuel Filter Assembly Stainless Steel Head 1/4
Replaced by new # MAR-10MAS-10-00
Package Quantity = 1
Yamaha OEM Mini-10 10-Micron Fuel Filter Assembly MAR-MINIF-IL-AS
Yamaha Part #MAR-MINIF-LT-AS
Mini 10-Micron Fuel/Water Separator Filter Assembly
Replaced by new # MAR-M10AS-00-00
Package Quantity = 1
Sierra 18-7982-1 Fuel Water Separator Kit
- Sierra fuel water separators remove over 99.8% of emulsified water from your gasoline
- Sierra’s 10 micron filters are over 90% efficient at removing particles as small as 10 micron
- All filters flow at 90 GPH to feed even the hungriest motor
- Prevent damage to sensitive inboard, sterndrive and outboard fuel injection systems
Sierra fuel water separators remove over 99.8% of emulsified water from your gasoline. Sierra’s 10 micron filters are over 90% efficient at removing particles as small as 10 microns. All filters flow @ 90 GPH to feed even the hungriest motor. Sierra 10 micron filters are recommended to prevent damage to sensitive inboard, sterndrive and outboard fuel injection systems.
Moeller 033320-10 10 Micron Water Separating Filter Kit
- 10 Micron Water Separating Filter Kit
- Designed for Mercury, Johnson, Evinrude, Yamaha, Suzuki, Honda, Tohatsu and Nissan engines, along with universal applications
- Includes a powder coated reusable filter head, filter, barbs and plugs
- Not recommended for use with electric fuel pumps
The Moeller 033320-10 10 Micron Water Separating Filter Kit is designed for Mercury, Johnson, Evinrude, Yamaha, Suzuki, Honda, Tohatsu and Nissan engines, along with universal applications. Includes a powder coated reusable filter head, filter, barbs and plugs. Not recommended for use with electric fuel pumps.
Aluminum Marine Fuel Water Separating Filter 3/8 Inch NPT Port for Outboard Motor Mercury 35-60494-1 Reusable Bowl Anti Corrosion 10 Micron Filter(Include Four Fittings)
- Material:The filter is made of aluminum.Anti-oxidation/corrosion.Long service life.
- Features:10 micron filters are over 90% efficiency at removing particles as small as 10 microns.10 micron filters are recommended to protect sensitive inboard,sterndrive and outboard fuel injection systems.
- Usage:Designed to trap the smallest particles and emulsified water from diesel.
- Function:It contributes to clear contaminates protect fuel system.Well sealed.Perfect water fuel separating performance.
- Water separating canister:High performance 3/8 NPT ports offer lower pressure drop rates.
Replaces Mercury 35-60494-1.
Replaces Racor S3213, B32013,18-7932-1,18-7932,18-7928-1,18-7928.
Filter Replaces Mercury Marine 35-809097,Racor S3213,Yamaha MAR-24563-03-00,18-7919,18-7919-1.
To replace element:
1.Drain the unit by loosen the drain screw.
2.Loosen and remove the filter element.
3.Loosen and remove the bowl from filter element.Please note the bowl is reusable,do not dispose unless broken.
4.Wipe O-ring gland clean,and coat bowl’s seal O-ring with fresh oil or grease and place it back to the gland.Then tighten the bowl onto filter element firmly by tool.
5.Coat filter element’s seal O-ring with fresh oil or grease and attach filter element onto filter head,and the tighten securely by tool.
6.Run engine and check for fuel leakage.
Attention:
1.Make sure you remove both the filter and the filter bowl from the mounting housing and put a light film of fuel on the o-ring.As delivered it will leak without the lubrication to allow for the proper crush.
2.For diesel transfer tank to filter the fuel before it enters the main tank.Only thing is you have to make sure to get the proper sealant for the threads. For The First time installation,in order to avoid any leaking at the threads.You’d better get some thread paste since the tape might plug the injectors if it were to come loosen.
3.Check and replace regularly.
Instructions:
To Drain Water:
1.Loosen drain screw to drain bowl of water.
2.Tighten drain screw.
3.Run engine and check for fuel leakage.
Safety Warning:
Periodically check fittings and filter element for leaks.Be careful when changed fuel filter element.Diesel is extremely flammable and highly explosive under certain conditions.Avoid spilling diesel.Always stop engine and do not smoke or allow open flames in the area while changing filter element.
Similar items with 4 stars and above
S3213 Fuel Water Separator Filter Assembly for Outboard Motor Mercury 35-60494-1 Yamaha Racor Sierra Engine Boat 10 Micron, Replaces B32013, 18-7932
- GOOD REPLACEMENT- Fuel Water Separator Filter 3/8 NPT ports offer lower pressure drop rates .10 micron filters are over 92% efficient at removing particles as small as 10 microns, Trap The Smallest particles and emulsified water from gasoline.Therefore, it can provide the best defense for sensitive inboard, stern-drive and outboard fuel injection systems.
- REPLACE PART NOUMBER-Replace for Marine outboard gasoline engines only! Replaces Mercury 35-60494-1
- Replaces Racor S3213, B32013
- 18-7932-1, 18-7932, 18-7928-1, 18-7928 | Filter Replaces Mercury Marine 35-809097, Racor S3213, Yamaha MAR-24563-03-00, 18-7919, 18-7919-1 | Bowl Replaces 18-7922-1, 18-7922 | Bracket Replaces 18-7853-1.
- NOTICE: This a separator for Diesel & Water, It could not be for Petrol & Water separator.Frequency of water fraining or filter replacement is determined by the contamination level in fuel. Inspect or drain the collection bowl of water daily and replace the filter annually, whichever comes first. Gasoline is extremely flammable and highly explosive under certain conditions. Always stop engine and do not smoke or allow open flames in the area while changing filter element.
- FUCTION:It contributes to clear contaminates protect fuel system.Well sealed, Perfect water Fuel separating performance.
- HIGH QUALITY: The filter is constructed of premium aluminum material for long lasting durability and reliability.
Replaces Mercury 35-60494-1 and Universal.
Features:
● High performance 3/8 NPT ports offer lower pressure drop rates.
● Direct Fit. Great replacement for your worn or broken fuel water separator filter!
● 10 micron filters are over 90% efficient at removing particles as small as 10 microns. provide strong protection of your fuel system.
To Drain Water
1. Loosen self-venting drain plug to drain water from bowl into a container.
2. Tighten drain.
3. Use primer bulb to fill filter with fuel.
4. Start engine and check ensure there are no leaks.
To replace element:
1.Drain the unit by loosens the drain screw.
2.Loosen and remove the filter element.
3.Loosen and remove the bowl from filter element.Please note the bowl is reusable,do not dispose unless broken.
4.Wipe O-ring gland clean,and coat bowl’s sealing O-ring with clean oil or grease and place it back to the gland.The tighten the bowl
onto filter element firmly by hand.
5.Coat filter element’s sealing O-ring with clean oil or grease and attach filter element onto filter head,and the tighten securely by hand.
6.Run engine and check for fuel leakage.
Attention:
1.Make sure you remove both the filter and the filter bowl from the mounting housing and put a light film of fuel on the o-rings.As delivered
it will leak without the lubrication to allow for the proper crush.
2.For diesel transfer tank to filter the fuel before it enters the main tank, Only thing is you have to make sure to get the proper sealant for
the threads. For The First time installation, In order to avoid any leaking at the threads. You’d better get some thread paste since the
tape might plug the injectors if it were to come loose.
3.Check and replace regularly.
S3213 Marine Fuel Water Separator Filter Assembly with Clear Bowl 18-7922, 3/8 Inch NPT Port For Outboard Motor Mercury 35-60494-1 Yamaha Racor Sierra Engine Boat 10 Micron – Replaces B32013, 18-7932
- REPLACMENT FUEL WATER SEPARATOR FILTER KIT – With advanced filtering media, this 10 micron filter are over 92% efficient at trapping the smallest particles and emulsified water from gasoline. Therefore, it can provide the best defense for sensitive inboard, stern-drive and outboard fuel injection systems.
- APPLICATIONS AND PART NUMBER – Fits for Marine outboard gasoline engines only! Replaces Mercury 35-60494-1
- Replaces Racor S3213, B32013
- 18-7932-1, 18-7932, 18-7928-1, 18-7928 | Filter Replaces Mercury Marine 35-809097, Racor S3213, Yamaha MAR-24563-03-00, 18-7919, 18-7919-1 | Bowl Replaces 18-7922-1, 18-7922 | Bracket Replaces 18-7853-1. Please check the Part Number before ordering, Thank You!
- OEM DESIGN, DIRECT FIT – Top-quality Marine Fuel Water Separating Filter, constructed of premium material for long lasting durability and reliability. High performance 3/8 NPT ports offer lower pressure drop rates. Great replacement for a proper fit and easy installation, quality materials used, meets or exceeds OEM standards, 100% rigorously tested before shipping.
- PAY ATTENTION – This a separator for Diesel & Water, It could not be for Petrol & Water separator. Frequency of water fraining or filter replacement is determined by the contamination level in fuel. Inspect or drain the collection bowl of water daily and replace the filter annually, whichever comes first. Gasoline is extremely flammable and highly explosive under certain conditions. Always stop engine and do not smoke or allow open flames in the area while changing filter element.
- BUY WITH CONFIDENCE – This S3213 Fuel Water Separator Filter Kit Assembly come complete with a 12-MONTH Warranty and LIFETIME Support, true hassle-free shopping experience. If you have any question, please feel free to contact us, we will help you sort it out asap 🙂
Features:
● High performance 3/8 NPT ports offer lower pressure drop rates.
● Direct Fit. Great replacement for your worn or broken fuel water separator filter!
● Traps 92% of harmful contaminants or small particles, provide strong protection of your fuel system.
OEM Part Number for Reference:
● Fuel Water Separating Filter Kit Relaces: Mercury 35-60494-1, Racor S3213, B32013, 18-7932-1, 18-7932, 18-7928-1, 18-7928
● Filter Replaces: Mercury Marine 35-809097, Racor S3213, Yamaha MAR-24563-03-00, 18-7919, 18-7919-1
● Clear Bowl Replaces: 18-7922-1, 18-7922
● Bracket Replaces: 18-7853-1
To replace element:
1.Drain the unit by loosens the drain screw.
2.Loosen and remove the filter element.
3.Loosen and remove the bowl from filter element.Please note the bowl is reusable,do not dispose unless broken.
4.Wipe O-ring gland clean,and coat bowl’s sealing O-ring with clean oil or grease and place it back to the gland.The tighten the bowl onto filter element firmly by hand.
5.Coat filter element’s sealing O-ring with clean oil or grease and attach filter element onto filter head,and the tighten securely by hand.
6.Run engine and check for fuel leakage.
Attention:.
1.Make sure you remove both the filter and the filter bowl from the mounting housing and put a light film of fuel on the o-rings. As delivered it will leak without the lubrication to allow for the proper crush.
2.For diesel transfer tank to filter the fuel before it enters the main tank, Only thing is you have to make sure to get the proper sealant for the threads.
For The First time installation, In order to avoid any leaking at the threads. You’d better get some thread paste since the tape might plug the injectors if it were to come loose.
3.Check and replace regularly.
Sierra 18-7983-1 Fuel Water Separator Kit
Sierra fuel water separators remove over 99.8% of emulsified water from your gasoline. Sierra’s 10 micron filters are over 90% efficient at removing particles as small as 10 microns. All filters flow @ 90 GPH to feed even the hungriest motor. Sierra 10 micron filters are recommended to prevent damage to sensitive inboard, sterndrive and outboard fuel injection systems. Contains: 1 – 18-7944 and 1 – 18-7853-1 Replaces: Mercury – 35-802893A4, Q4, 35-60494A4
Conclusion
By our suggestions above, we hope that you can found yamaha water fuel separator filter assembly for you.Please don’t forget to share your experience by comment in this post. Thank you!
