Best Water Separator Filter Kit Spin

Racor Spin-On Fuel Filter/Water Separator Complete Assembly.Fuel Filter/Water Separator with mounting head.Spin-on element and see-thru bowl.Features Racor’s proprietary Aquabloc II filter media for maximum filtration and water capture.Kit includes S3228 filter cartridge, aluminum mounting head, and clear plastic water capture bowl.Not USCG approved for inboard use.

Yinlowa Spin-on Fuel and Water Separator Filter With Nylon Collection Bowl and Fittings For Racor R12T S3240 12AT NPT ZG1/4-19

Features:
– This fuel filter r12t combo kit includes fittings needed. Direct replacement for the broken one!
– Coated with a durable electrostatically applied powder coating for superior corrosion resistance.
– These are more suited to compact off road diesel equipment:tractors,skid steers loaders,movers.
– Traps 92% of harmful water or contaminants, your engine will perform better than ever with clean, water-free fuel

Specifications:
– Filter Rating: 10 Micron
– Maximum Flow Rate: 30 GPH (57 LPH)
– Port / Connecting Size: M18 X 1.5 Center Thread
– OEM Part Number: Replaces Racor R12T 120AT S3240

Instruction for R12T Water Separator and Filter Complete Combo:
1). Nylon collection bowl down when installed the water separator and filter.
2). This separator marine filter has four ports, two inputs and two outputs. We provide two plugs for the extra two ports. If you need to use two plugs, you must install them to the filter and tighten them.
3). Before installing the filter, you have to remove those plugs, teflon-tape them, and re-install them.Prevent leaks from these plugs.
4). All of the above steps are very simple to operate, you can manually disassemble, and then use the tool to install tighten.

Buy with Confidence. Any question? Please don’t hesitate to contact us!

The Moeller 033320-10 10 Micron Water Separating Filter Kit is designed for Mercury, Johnson, Evinrude, Yamaha, Suzuki, Honda, Tohatsu and Nissan engines, along with universal applications. Includes a powder coated reusable filter head, filter, barbs and plugs. Not recommended for use with electric fuel pumps.

If you have difficulty in installing, you can go to YouTube to find the appropriate installation video:https://www.youtube.com/watch?v=LyeqTDVzY-A.

Specification:
1.Fuel Water Separating Filter fit 3/8 Inch NPT Outboard Motors as well.
2.Maximum Flow Rate 30 GPH (57 LPH).
3.Port / Connecting Size M18 X 1.5 Center Thread.
4.These are more suited to compact off road diesel equipment:tractors,skid steers loaders,movers.
5.Filter Rating 10 Micron.10 micron filters are over 90% efficient at removing particles as small as 10 microns. 10 micron filters are recommended to prevent damage to sensitive inboard, sterndrive and outboard fuel injection systems, Designed to trap the smallest particles and emulsified water from Diesel.

Product details:
1.Don’t be caught in the water without one of these Diesel spin-on filters.
2.Filters are designed for high performance applications, and with flow rate of 30 GPH on the R12T model, your engine will perform better than ever with clean, water-free Fuel.
3.The inlet and out let can be feed in on the same side or in one side out the other side.
4.Check and replace regularly.

R12T water separator and filter complete combo installation instruction:
1.Nylon collection bowl down when installed the water separator and filter.
2.This filter has four ports, two inputs and two outputs. We provide two plugs for the extra two ports. If you need to use two plugs, you must install them to the filter and tighten them.
3.Before installing the filter, you have to remove those plugs, teflon-tape them, and re-install them.Prevent leaks from these plugs.
4.All of the above steps are very simple to operate, you can manually disassemble, and then use the tool to install tighten.

This is a spin-on filter and water separator kit. It is designed for high performance applications, and with flow rate for 20 liters/min. It is simple to install and has a 60 PSI pressure rate. This kit comes with a reusable, corrosion-resistant head and three plus. Keep your marine motor running efficiently with this fuel filter water separator. Your engine will perform better than ever with clean. This fuel filter/water separator kit comes with reusable, corrosion-resistant filter head, water separating fuel filter, and 3 plus. Universal filter and mounting bracket included. For all 2 and 4 cycle engines. Flow rate 20 liters/min. Pressure rate: 60 PSI. Filtration capability: 10 micron. Replaces and are Interchangeable with Mercury #35-60494-1 & #35-807172. Thread type: 11/16″ Item# PM153104.

18-7932-1 18-7932 Marine Fuel Filter Water Separator Assembly Including 1*18-7919 filter,1*18-7853-1 bracket,1*18-7922 Clear Bowl,2*18-4256 1/4″ pipe plugs. For Application:Marine Racor,Mercury

Fuel filters represent the first line of defense and are critical to keeping your engine running at peak performance and efficiency. This outboard engine fuel/water separating filter kit includes a reusable see-thru plastic bowl with drain and 10 micron filter. Universal fit for Seachoice, Racor, Moeller, Yamaha, Suzuki, SMI, Volvo Penta, 12 Sierra, Aqua Power and other filter heads. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters offering a wide-ranging product line while remaining affordable.

Item specifics:
PRODUCT TYPE : Filter Fuel/water Separator
-This listing is for one (1) unit. This is a new For Racor R12T Marine Fuel Filter / Water Separator complete assembly.
Product Type Filter Fuel/Water Separator
Description Replacement Fuel Filter/Water Separator
-Maximum Flow Rate 15 GPH (57 LPH)
-Filter Rating 10 Micron
-Port/Connecting Size M18 X 1.5 Center Thread
-Additional Detail Used In Model 120A Filter Assembly
Dont’ be caught in the water without one of these diesel spin-on filters. filters are designed for high performance applications, and with flow rate of 15 GPH on the R12T model, your engine will perform better than ever with clean, water-free fuel. These filter units are coated with a durable electrostatically applied powder coating for superior corrosion resistance. The unit features Racor’s famous Aquabloc II technology. This spin-on filter design is simple to replace and the reusable clear plastic collection bowl and features a self-venting drain for removing unwanted muck and water.

When you’re out on the water having fun, you shouldn’t need to give your fuel system a second thought. With Moeller, you don’t. Our products are safe, reliable, and durable. For more than 25 years, Moeller Marine has been the industry standard in fuel system design and construction. Moeller’s reputation is built on innovative engineering, quality construction, and award-winning service.

Conclusion

By our suggestions above, we hope that you can found water separator filter kit spin for you.Please don’t forget to share your experience by comment in this post. Thank you!