minmommy 
Nowadays, there are so many products of water filter housing using 10 inch filter in the market and you are wondering to choose a best one. You have searched for water filter housing using 10 inch filter in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings water filter housing using 10 inch filter which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
34,051 Reviews Scanned
Geekpure 10 Inch Whole House Big Blue Water Filter Housing 4.5" x 10"-1-Inch Inlet/Outlet with Wrench and Bracket-Blue Color (1)
- 10 Inch Housing-Complete one set 10 inch big blue housing,1″NPT inlet/outlet,with pressure release button for high flow,with plastic wrench and bracket, filter cartridges are sold separately.
- STANDARD-Fits all standard sized 4-1/2 inch diameter industry 10 inch whole house cartridges.
- HIGH QUALITY-Fits NSF standard,Large capacity housing for high flow applications.
- WARRANTY-One year limited warranty,30 Days Money Back Guarantee.
- RESPONSABLE MANUFACTURER- ISO9001:2008 certificated Manufacturer ,also Member of Water Quality Association (WQA).
Geekpure Filter Housing 10" for Reverse Osmosis System -1/4 Inch Inlet/Outlet-for 2.5 Inch x 10 Inch Fitlers
- Replacement housing for Geekpure RO system,Widely used in RO system or pre-filtration.
- Fit with most RO systems using standard 10″ filters.But different brand,the injection mould is totally different,NOTE:PLEASE REPLACE HEAD AND HOUSING BODY TOGETHER.
- INLET-OUTLET-1/4″ female threaded in and out fittings.matched quick fitting ASIN:B078VQN6TZ .
- SIMPLE INSTALLATION-Easy to replace.Food grade Polyethylene will not cause pollution to water.
- Pack of 3. 1 x Filter housing , 2 x O rings . matched wrench ASIN: B07D9JWRYQ .
Pentek 158643 3/8" #10 3G Slim Line Clear Filter Housing with Bracket and Pressure Relief
- Slim filter housing for low-flow applications with space restrictions
- Clear styrene-acrylonitrile (SAN) for on-site viewing of flow and cartridge condition
- Holds a 10″ x 2-1/2″ sediment or carbon filter cartridge (sold separately)
- Pressure relief button for easier cartridge replacement
- Initial pressure drop of 2 psi at a flow rate of 5 gpm
This Pentek 158643 3/8″ #10 3G Slim Line clear filter housing with integrated mounting bracket and pressure relief is suitable for low flow rate applications that have space restrictions. The sump is made of clear styrene-acrylonitrile (SAN) for on-site viewing of flow and cartridge condition, and the cap is made of reinforced blue polypropylene for strength and resistance to chemicals. The cap has 3/8″ female National Pipe Thread Taper (NPT) threaded input and output connections and a nitrile butadiene rubber (Buna-N) O-ring to ensure a watertight seal. A pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges. The housing can be used with a 10″ x 2-1/2″ sediment or carbon filter cartridge (sold separately). It has an initial pressure drop of 2 pounds per square inch (psi) at a flow rate of 5 gallons per minute (gpm), a maximum operating pressure of 125 psi, and a maximum operating temperature of 125 degrees F (51.7 degrees C). This filter housing meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is for use in various applications, including residential drinking water filtration, food service, and humidifying systems, among others.
Specifications
| Filter cartridge size (H x W) (sold separately) | 10 x 2-1/2 inches (254 x 63.5 mm) |
| Initial pressure drop at 5 gpm | 2 psi |
| Maximum temperature | 125 degrees F (51.7 degrees C) |
| Maximum pressure | 125 psi |
| Maximum dimensions (H x W) | 13-3/8 x 5-3/8 inches (340 x 137 mm) |
| Materials and structural integrity certification | NSF/ANSI standard 42 |
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
Similar items with 4 stars and above
Pentek 150071 3/4" #10 Standard Clear Filter Housing with Pressure Relief
- Standard filter housing for residential, commercial, and industrial applications
- Clear styrene-acrylonitrile (SAN) for on-site viewing of flow and cartridge condition
- Holds a 10″ x 2-1/2″ sediment or carbon filter cartridge (sold separately)
- Pressure relief button for easier cartridge replacement
- Initial pressure drop of 1 psi at a flow rate of 10 gpm
This Pentek 150071 3/4″ #10 Standard clear filter housing with pressure relief is suitable for residential, commercial, and industrial applications. The sump is made of clear styrene-acrylonitrile (SAN) for on-site viewing of flow and cartridge condition, and the cap is made of reinforced blue polypropylene for strength and resistance to chemicals. The cap has 3/4″ female National Pipe Thread Taper (NPT) threaded input and output connections and a nitrile butadiene rubber (Buna-N) O-ring to ensure a watertight seal. A pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges. The housing can be used with a 10″ x 2-1/2″ sediment or carbon filter cartridge (sold separately). It has an initial pressure drop of 1 pound per square inch (psi) at a flow rate of 10 gallons per minute (gpm), a maximum operating pressure of 125 psi, and a maximum operating temperature of 125 degrees F (51.7 degrees C). This filter housing meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is for use in various applications, including residential drinking water filtration, food service, and humidifying systems, among others.
Specifications
| Filter cartridge size (H x W) (sold separately) | 10 x 2-1/2 inches (254 x 63.5 mm) |
| Initial pressure drop at 10 gpm | 1 psi |
| Maximum temperature | 125 degrees F (51.7 degrees C) |
| Maximum pressure | 125 psi |
| Maximum dimensions (H x W) | 12-5/8 x 5-1/4 inches (321 x 133 mm) |
| Materials and structural integrity certification | NSF/ANSI standard 42 |
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
Pentek 150237 #10 Big Blue Filter Housing, 1" Female NPT Inlet/Outlet
- Large filter housing for high-flow and heavy sediment applications
- Reinforced polypropylene sump for strength and chemical resistance
- Use with a 10” x 4-1/2” filter cartridge (sold separately)
- Pressure relief button for easier cartridge replacement
- Initial pressure drop of 1 psi at a flow rate of 15 gpm
This Pentek 150237 1” #10 Big Blue filter housing with pressure relief is suitable for high-flow and heavy sediment applications. The opaque blue sump is made of reinforced polypropylene for strength and resistance to chemicals, and the black cap is made of high-flow polypropylene (HFPP) for stiffness. The black cap has 1” female National Pipe Thread Taper (NPT) threaded input and output connections and a nitrile butadiene rubber (Buna-N) O-ring to ensure a watertight seal. A pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges. The housing can be used with a 10” x 4-1/2” filter cartridge (sold separately). It has an initial pressure drop of 1 pound per square inch (psi) at a flow rate of 15 gallons per minute (gpm), a maximum operating pressure of 100 psi, and a maximum operating temperature of 100 degrees F (37.8 degrees C). This filter housing meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is for use in various high-flow applications, including residential drinking water filtration, food service, and irrigation, among others.
Specifications
| Filter cartridge size (H x W) (sold separately) | 10 x 4-1/2 inches (254 x 114 mm) |
| Initial pressure drop at 15 gpm | 1 psi |
| Maximum temperature | 100 degrees F (37.8 degrees C) |
| Maximum pressure | 100 psi |
| Maximum dimensions (H x W) | 13-1/8 x 7-1/4 inches (333 x 184 mm) |
| Materials and structural integrity certification | NSF/ANSI standard 42 |
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
GOLDEN ICEPURE 1 Micron 2.5" x 10" Whole House CTO Carbon Sediment Water Filter Replacement Cartridge Compatible with RO Unit, Dupont WFPFC8002,WFPFC9001, FXWTC, SCWH-5, WHEF-WHWC, WHCF-WHWC, 4 Pack
- ❄️【NSF 42&372 CERTIFICATION】 Certified by WQA against NSF42. The filter can reduce 99% sand, scale, rust, sediment and 99% Chlorine, color, odor. Certified by WQA against NSF372, NO Lead containing in the materials. The filter retains mineral substances which is good to health.
- ❄️【HIGHER QUALITY FILTRATION】 Carbon is well known for its unique absorbing ability, a pound of carbon is able to provide up 125 acres of filtering surface area. Our RO carbon filter is made of 100% pure coconut shell activated carbon block to remove most sediments, Sintering Technology ensures high absorbing capacity offers a much finer filtration of suspended particles and dirt.
- ❄️【HIGH CAPACITY】 The CTO carbon filter can filter up to 13000 gallons depending on water quality. Suggest to replace it every 3- 6 months for the average household for optimal performance depending on the use. Let it bring a wonderful cleaner water experience to your loved ones.
- ❄️【100% Money-Back Guarantee】We promise a no-worry and 30-days Money-Back Guarantee.Your happy experience during shopping and using the filter is our aim.
- ????【COMPATIBLE FILTERS】 The filter can be used in any standard 10” x2.5” RO Unit whole house filtration system and compatible with standard 10 inch X 2.5 inch filter models of DuPont WFPFC8002, WFPFC9001, SCWH-5, Whirlpool WHCF-WHWC, Pentek CBC-10, GE FXWTC, Culligan D-10A & D-10, Aquaboon CTO, Ace Hardware 84608, Apex IR-40, Cornelius COR10B1, COR10B5, Dupont DWC30001, PFC8002, WFDWC30001, WFPFC8002, WFPFC9001, 46942, EcoLab 9320-1002, Everpure CG5-10, DEV9108-15, Flotec TO1, GE FX12P, GXWH20F.
4 PACK OF 1 MICRON 10″X2.5″ WHOLE HOUSE CTO CARBON WATER FILTER REPLACEMENT CARTRIDGE
★Certified to NSF 42 by WQA
Chlorine reduction rate >99%
★Certified to NSF 372 by WQA
Lead free material
This whole house coconut water filter is made of 100% premium coconut shell activated carbon block, removes dust, particles, sediments,sands, rust, Chlorine, provide clean fresh tasting water for your family. BPA free silicone O-ring provides good sealing and high temperature resistance, food grade material ensures healthy water and reduce use of plastic for environmental friendly planet.
Specification:
Pcs/Box: 4 units/ box
Micron Rating: 1 Micron
Filter Dimensions: Length: 10 inch , Diameter: 2.5 inch
Filter Life: Replace every 3-6 months/13000 gallons (Depending on water quality)
NSF certified: NSF42 certified by WQA
Flow rate: 5 GPM
Working Temperature: 4-52℃/39-126℉
Max. Operating Pressure: 100 psi
Normal working pressure: 60psi
Best choice for your whole house water filtration
Compatible Replacement Filters:
Ace Hardware 84608, Apex IR-40, Cornelius COR10B1, Cornelius COR10B5, Dupont DWC30001, PFC8002, WFDWC30001, WFPFC8002, WFPFC9001, 46942, EcoLab 9320-1002, Everpure CG5-10, DEV9108-15, Flotec TO1, GE FX12P, FXWTC, GXWH20F, NuCalgon 4711-87, OmniFilter TO-1, TO1, TO1-D, TO1-DS, TO1-S, C1, TO1-SS, TO1-SS24-01, TO1-SS24-02, TO1-SS24-05, TO1D, TO1DS, TO1S, TO1SS, OptiPure CTO-10, OptiPure W-5, Pentair DEV9108-15, Pentek 155531-03, 155531-43, C1, CEP-10E, EP-10, PureMark PFS10B1, PFS10B5, Shurflo 15-056-10, True Value 583-377, Watts F109009, Whirlpool WHEF-WHWC, WHKF-WHWC, RF-1010.
Compatible with reverse osmosis filter systems of brands:
GE, Culligan, Dupont, Kenmore, Omnifilter, Whirlpool
NOTE: This is a compatible spare part and the manufacturers’ names and part numbers have been used for reference purposes only.
10 inch Transparent Standard Water Filter Housing, Presser Relief Button, 3/4” Inlet/Outlet Brass Port, Accepts Standard 10”x 2.5” Cartridges, 3/4” Brass Port, Mounting Hardware Included (3 sets)
- ???? DURABLE STRUCTURE: 10” Transparent Standard Housing is proper for heavy sediment applications. The housing body is made of reinforced polypropylene for strength and resistance to chemicals, and the blue cap is made of high-flow polypropylene for toughness. The cap has 3/4″ inlet / outlet brass ports which allowed better sealed connections to the corresponding pipes
- ???? POINT OF USE: Those Housings for use in various high-flow applications and is usually placed in the main water line entering the house including, but not limited to residential drinking water filtration, well water filtration, food service, and irrigation. Extends life of Washing Machines, Water Heaters & Other Household Appliances Removing Chlorine, Taste, Odors & Other Particles
- ???? EASY TO OPERATE: There is rubber O-ring on the top of the housing body to ensure a watertight seal. A pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges. Unique cap design allow quickly and easy to remove housing to replace cartridges. Transparent housing body allows visually to determine when cartridge should be changed
- ????ACCEPTS 10” Standard Cartridges: Dupont PFC5002, WFPFC5002, Pentek DGD Series, 3M CFS110, CBC-10, Aqua Pure AP110, AP51T, Hydronix SGC-25-1005, Culligan P5, D-10A, OmniFilter RS14-SD, GE FXUSC, Aquaboon 25S-5M, Manitowoc K-00173, Whirlpool WHKF-GD05, WHA2BF5, American Plumber W5P, Watts Premier MAXETW-975, WCBCS975-RV, SCWH-5, Tier1 EP5_10, EcoPure EPW2C, Purenex C-5M, KleenWater KWGE25RG, Omnipure OMB934-5M, WFPFC9001, MatriKX E32-250-125-975, DEV9108-15, iSpring FC15 (Sold Separately)
- ???? WELL-MATCHED FOLLOWING HOUSINGS SYSTEMS: DuPont WFPF38001C, WFPF13003B, Pentek 158643 3/8, Culligan WTR Filter HF-360A and HF-150A, American Plumber WC34-PR, Geekpure RO5-FH10, Hydronix HF3-10CLBK34, EcoPure EPW2
Similar items with 4 stars and above
Geekpure 10 Inch Big Clear Water Filter Housing for Whole House Water Filtration with Wrench and Bracket 1 Inch Inlet Outlet-4.5 x 10 Inch – Clear Color (Pack of 1)
- Complete set 10 inch big clear housing,1″NPT inlet/outlet,with plastic wrench,screw and metal bracket.
- Fits all standard sized 4-1/2 inch diameter industry 10 inch whole house cartridges.Fits NSF standard,Large capacity housing for high flow applications.
- It is Installed at the main water supply and produce pure water for your entire home. Enjoy better water from every tap and every appliance in the whole house.
- ADVANTAGE-clear housing allows you to see when you need to change filters and everything else works as it should.
- Pack of 1,Filter housing only, filter cartridges are sold separately .
Geekpure Filter Housing 10" for Reverse Osmosis System -1/4 Inch Inlet/Outlet-for 2.5 Inch x 10 Inch Fitlers Clear Housing
- FUNCTION-Replacement housing for RO system,Widely used in RO system or pre-filtration.Clear housing allows you to see when you need to change filters and everything else works as it should.
- UNIVERSAL-Standard size for most RO systems using standard 10″ filters.
- INLET-OUTLET-1/4″ female threaded in and out fittings. NOTE:PLEASE REPLACE HEAD AND HOUSING BODY TOGETHER.
- SIMPLE INSTALLATION-Easy to replace.Food grade AS will not cause pollution to water.
- Just Housing in the box, matched wrench ASIN: B07D9JWRYQ ,matched quick fitting ASIN:B078VQN6TZ .
AQUA CREST 5 Micron 10" x 4.5" Whole House Big Blue Sediment Replacement Water Filter for GE FXHTC, American Plumber WRC25HD, GXWH35F, GNWH38S, Pack of 2
- WATER PURIFICATION: Offers clean and fresh water to you and your family
- FILTRATION ABILITY: Uses GAC (granular activated carbon) with 5 micron rate to effectively reduce chlorine and remove all large particles like sand, rust and other impurities
- FILTER LIFE: Long lasting up to 3 months or 30,000 gallons
- REPLACEMENT MODEL: GE FXHTC, GXWH40L, American Plumber GXWH35F, GNWH38S, WHIRLPOOL WHKF-WHPCBB, WRC25HD, GXWH30C, GNQH38S, Pentek RFC-BB, Culligan RFC-BB ,HD-950A, Whirlpool WHKF-GD25BB, RFC-BBSA, and most systems with 10″x4.5″ filters.
- Please note that the FXHTC water filter uses GAC(granular activated carbon) to reduce chlorine, sand, rust and other impurities in water while the FXHSC filter is made from durable pleated polypropylene, but both of them fit the most systems with 10″ x 4.5″ filters.
Conclusion
By our suggestions above, we hope that you can found water filter housing using 10 inch filter for you.Please don’t forget to share your experience by comment in this post. Thank you!
