minmommy 
Nowadays, there are so many products of water filter housing oring in the market and you are wondering to choose a best one. You have searched for water filter housing oring in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings water filter housing oring which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
24,852 Reviews Scanned
APEC Water Systems Set 3 Pcs 3.5" O.D. Replacement O-Ring for Reverse Osmosis Water Filter Housings
- IMPORTANT: A set of 3 O-rings for standard filter housings of APEC ESSENCE Series RO systems purchased BEFORE 6/1/2013 and AFTER 6/30/2019. ULTIMATE Series RO systems purchased BEFORE 5/1/2015 and after 6/30/2019
- Light weight, easy install and unload
- Diameter 3.5 inch OD
The O-RING-SET contains 3 pieces of 3.5 in. O.D. standard industry size O-RING use to prevent leaks when customer need to change 3 pre-filter of 10 in. standard under sink reverse osmosis system. Recommend to change all O-RINGs once open the housing. Lubricate with clean lubricant and place in grooves below thread to prevent water leaks.
APEC Water Systems does not distribute or sell our products to any 3rd party sellers on Amazon. Please purchase genuine APEC Water system product in “new” condition from Amazon.Com or APEC Water directly for authenticity. Manufacture warranty may not apply in all cases, depending on factors such as use of product, where the product was purchased, or whom you purchased the product from. Please review the warranty carefully and contact APEC Water if you have any question.
Captain O-Ring – Pentek, Pentair Water 151122 Replacement for OEM Size Big Blue O-Ring Buna-N ORing (3 Pack)
- Part: Pentek Water 151122 O-Ring (3 Pack)
- Includes 3 replacement o-rings (also called seals or gaskets) to repair your leaking water filter housing [OEM UPC: 051678511220 , 885343762095]
- 151122 OEM Size o-rings are approximately 5.5″ Inside Diameter x 5.83″ Outside Diameter x 0.165″ Thickness
- Direct Replacement for the following part numbers (see description below for full water filter compatibility list): Ace Hardware 4001756
- American Plumber 152032, W10-OR
- APEC O-RING-HB
- Ametek Kleen-Plus 151122-03
- Culligan OR-100, 151122-27, 01019189
- Pentek 151122, BB BUNA-N
- Manufactured and Warrantied by Captain O-Ring LLC, with decades of experience in the sealing and chemical industry.
ANCIRS 3 Pcs 3.5" O.D. Replacement O-Rings for 10" Reverse Osmosis Water Filter Housing
- A set of 3 O-rings for standard filter housings of APEC ultimate RO systems and essence RO systems.
- A high quality, low cost alternative to more expensive OEM O-rings.
- Light weight, easy to install and unload.
- Diameter 3.5 inch O.D.
- Fits Housings: AP11S, AP11T, AP12S, AP12T, AP26T, AP51T, AP101S, AP101T, AP102S, AP102T, AP110, etc
A set of 3 O-rings for standard filter housings of ultimate systems and essence systems.
6-Pack of O-Rings for GE (TM) 2.5 Inch Water Filters – Compatible with GXWH20F, GXWH04F, GXRM10, GXWH20S and GX1S01R – Gaskets/O-Rings/Seals by Impresa Products
- PERFECT REPLACEMENTS: Perfect replacement o-rings / gaskets / seals for GE (TM) 2.5 in water filter housings. Compatible with models GXWH20F, GXWH04F, GXRM10, GXWH20S and GX1S01R – whole home water filtration system
- REPLACE YOUR LOST OR LOOSE GASKET: Gaskets get lost periodically and get warped/worn out over time. A damaged gasket (or no gasket, at all) means a poor seal, leading to a leaky mess. Always have a spare on hand!
- MADE FROM HIGH-QUALITY RUBBER: Our gaskets are made from high-quality, durable rubber and are made to last. 3 5/16 inch inner diameter – 3 9/16 inch outer diameter
- SAVE MONEY, EASY TO INSTALL: Replacement gaskets for these filters are often hard or expensive to find – don’t waste money on expensive replacements! Easy-to-install. 6 gaskets per pack
- Please note: This is an aftermarket product (produced by Impresa Products). We have no affiliation with or endorsement from any of the manufacturers mentioned
APEC Replacement O-Ring For 10" or 20" Big Blue and Clear Water Filter Housing (O-RING-HB)
- Replacement O-Ring for Big & Compact Blue and Clear Housings 20″ or 10″ with input 3/4″, 1″, 1.5″
- O-rings should be replaced when changing the filter cartridge to avoid possible water leakage
- Manufactured using certified materials
- Used in various applications
- Fits Pentek BigBlue and Hydronix Big Clear
Replacement O-Ring for Big & Compact Blue and Clear Housings
O-rings should be replaced when changing the filter cartridge to avoid possible water leakage.
For Big & Compact Blue Housings: HBB-20 series; HBB-10 series (input sizes: 3/4″, 1″, 1.5″)
For Big & Compact Clear Housings: HBC-20 series; HBC-10 series (input sizes: 3/4″, 1″, 1.5″)
For Housing Sets: Big Duo & Triio
For Filter Bundles: CB1-SED20-BB, CB1-CAB20-BB, CB2-SED-CAB20-BB, CB3-SED-IRON-CAB20-BB
Housing sold separately
APEC Water Systems does not distribute or sell our products to any 3rd party sellers on Amazon. Please purchase genuine APEC Water System product in “New” condition from Amazon.com or APEC Water directly for authenticity.
Manufacture warranty may not apply in all cases, depending on factors such as use of product, where the product was purchased, or whom you purchased the product from. Please review the warranty carefully and contact APEC if you have any question.
151122 Big Blue Oring Pentek Paentair O-Ring OEM Size 6 Pieces with Dow Molykote 111 O-Ring Lubricant and Scratch Free O-Ring Pick
- Direct Replacement for Pentek 151122 O-Ring, 152032, 4001756, 151122-03, Culligan OR-100, and many others.
- Replace O-rings at every cartridge change to avoid costly water damage, 6 Pack O-Ring Seals, Made of Buna-N Rubber the industry standard, 100% Money Back Guarantee
- Dow Molykote O-ring Silicone Lubricant improves sealing preventing water leaks, helps hold O-Ring in place during assembly
- Certified to NSF Standards 51 and 61, Meets FDA: 21 CFR 175.300
- Non Scratch O-Ring Pick tool aids in removal of old O-rings while reducing the chances of scratching the filter housing O-ring groove.
Kinetic Wares supplies quality replacement parts for home water systems. This Culligan OR-100 (OR100) O-Ring 6 pack is compatible with Big / Compact Housing HBB-20, HBB-10, HBC-20, HBC-10, MWH-D, MWH-D-WELL, MWH-D20, MWH-D20-WELL, MWHSD, MWHSD-WELL, MWHSD20, MWHSD20-WELL, XWH-600, XWH-1000. Ace Hardware 49561; Ametek Kleen-Plus HD-10-R50, BBS; American Plumber W10-PR, 152014, W2010-PR, 152015, W15-PR, 152016, W2015-PR, 152017, WWHC, 152022; Culligan HD-950, HD-950A; Pentek 150237, 150239, 150469, BBFS-22, BBFS-222; Hydronix HF45 Series Housings. Ace Hardware 4001756; American Plumber 152032, W10-OR; Ametek Kleen-Plus 151122-03; Culligan OR-100, 151122-27, 01019189; Pentek 151122, BB BUNA-N. Just to name a few. 100% Satisfaction guarantee! Dow Corning Molykote 111 General purpose O-ring and valve lubricant. Provides a noncuring moisture barrier; high dielectric strength; moisture and ozone resistance; good thermal, oxidation and chemical stability; prevents O-Ring from binding causing leaks, Non-scratch O-Ring Pick aids in removal of O-Rings reducing the chance of scratching the filter housing creating a leak path and dripping filter.
Captain O-Ring – Culligan Compatible OR-100 (OR100) O-Ring Replacement for Big Blue Filter Housing Buna-N ORing (3 Pack)
- Part: Replacement Culligan OR-100 O-Ring (3 Pack)
- Compatible with Big Blue Filter Housings, including Culligan HD-950
- Contains 3 O-Rings
- Material: Buna-N (nitrile butadiene rubber)
- Manufactured and Warrantied by Captain O-Ring LLC, with decades of experience in the sealing and chemical industry.
This Culligan OR-100 O-Ring (3 Pack) is compatible with Big Blue Filter Housings, including the Culligan HD-950. It has a diameter of 5-3/4 inches and is made of nitrile butadiene rubber (Buna-N) for flexibility and resistance to abrasion and tearing.
What to expect:
This item includes three (3) O-Rings in a resealable zip-top poly bag with “Captain O-Ring” branded packaging.
Manufactured and warrantied against defect for one year by Captain O-Ring LLC. “Captain O-Ring” is a registered trademark of Captain O-Ring LLC.
Captain O-Ring – Whirlpool WHKF-DWHV, WHKF-DWH & WHKF-DUF Water Filter Replacement Orings (3 Pack)
- Replacement O-Rings for Whirlpool filter housings that require a 2.5 inch cartridge
- Includes three (3) o-rings
- O-Ring inner dimension 3.48 inch x 0.14 inch (88mm x 3.53mm). Please note that these o-rings are for filters that accept the thinner 2.5” wide filter cartridge and not the larger 4.5” wide filter cartridge.
- Durable Nitrile Butadiene (Buna-N) Rubber Construction
- Manufactured and Warrantied for one year by Captain O-Ring LLC
Three (3) replacement o-rings for your Whirlpool Filter. Compatible with Whirlpool filter housings WHKF-DWH, WHKF-DWHV, WHCF-DWHV, WHCF-DUF, and WHKF-DUF. Captain O-Ring’s top quality replacement o-rings create a watertight seal between your water filter sump and the water filter head.
What to expect:
This item includes three (3) O-Rings in a resealable zip-top poly bag with “Captain O-Ring” branded packaging.
Manufactured and warrantied against defect for one year by Captain O-Ring LLC. “Captain O-Ring” is a registered trademark of Captain O-Ring LLC.
(3 Pack) O-Ring Replacements for Standard 10" Reverse Osmosis Water Filter Housings, Universal Fit
This 3 pack O-Rings by iFilters are used to seal water filter housings. It has an ID of 3.5″ and made of nitrile butadiene rubber (Buna-N) for flexibility and resistance to abrasion and tearing. Fits many standard size housings for that use 10″ filters, which are used in various applications, such as drinking water purification, whole house, industrial processes, and more. The ORING-25 is the Original OEM replacement for the following iFilters filtration systems: LWH-D, LWHSD, LWHGAC, CNTP-1W, CNTP-1C, U200UV, U200, U300UV, U300, RO-550, RO-575, RO-5100, and RO-S50. Compatible with filtration systems made by: iFilters, APEC, iSpring, Geekpure, Olympia Water Systems, and many more Fully compatible: APEC ROES-50, ROES-PH75, ROES-UV75, RO-90, RO-PH90, RO-PERM, RO-PUMP; iSpring RCC7, RCC7P, RCB3P, RCC7AK, RCC7P-AK, RCC7U, RCC1UP, RCC7AK-UV, RCC1UP-AK, RCC7D, WCC31, CT10, CKC1C, HC16, WCB32C; Geekpure RO5; Olympia Water Systems OROS-50, OROS-80, OROS-80-ALK. Whats included: This item includes three (3) O-Rings with “iFilters” branded packaging. Manufactured and warrantied against defect for one year from purchase date by iFilters. 3rd Party purchases are not warranted. “iFilters” is a registered trademark of iFilters.
151120 OR-34 Replacement Water Filter Housing Oring Compatible with Pentek Culligan DuPont (6 Pack)
- Genuine Kinetic Wares Replacement Part 151120
- Direct Replacement for Pentek 151120, OR-34, WFAO150, 01019184, 151120-27
- Fits Filter Housings: Pentek #10, #12, and #20 housings with 3/4″ inlet/outlet connections
- Pentek 150071
- Culligan HF-150, HF-150A, HF-160, HF-360
- Ace Hardware 45025, 46764, 46764
- American Plumber W34-PR, WC34-PR, WV34, WVC34
- Ametek Kleen-Plus PSCL-SI / PSCL-S1, PS-OO / PS-00, PVHCL-SI / PVHCL-S1
- DuPont WFPF38001C
- Includes three (3) O-Rings To Seal Your Water Filter Housing
- Buna-N 3.86” ID x .14” CS AS568 O-Ring 60 Day Money Back Guarantee
Description: Kinetic Wares manufactures only the highest quality replacement components. This includes three (3) water filter housing O-Rings compatible with:
Conclusion
By our suggestions above, we hope that you can found water filter housing oring for you.Please don’t forget to share your experience by comment in this post. Thank you!
