minmommy 
Nowadays, there are so many products of water filter housing clear in the market and you are wondering to choose a best one. You have searched for water filter housing clear in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings water filter housing clear which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
14,212 Reviews Scanned
Hydronix HF3-10CLBK34 10" Clear Housing with Black Rib Cap, 3/4" Ports
CULLIGAN WH-HD200-C Whole House Sediment Water 1" HD CLR WTR Filter, Clear bowl, grey cap
- Whole house water filtration system with 1″ stainless steel reinforced inlet/outlet connectors
- Perfect for residential homes, helps protect appliances and pluming from sediment and scale
- Features bypass shut off valve, integrated bracket design and battery operated filter change timer
- Reduces: sediment, rust, scale, dirt, coarse sand, sand, fine sand, silt, bad taste, odor, aesthetic chlorine taste and odor (depending on filter cartridge)
- The WH-HD200-C housing has been tested and certified by WQA against NSF/ANSI 372 for low lead compliance, CSA B483.1 and NSF/ANSI 42 for material safety and structural integrity requirements only
- Includes: WR-HD housing wrench, mounting bracket, filter life monitor and filter monitor battery
- Compatible with Culligan filter cartridges: R50-BBSA, CW25-BBS, CP5-BBS, CW5-BBS, RFC-BBSA
The WH-HD200-C Heavy Duty clear whole house system with clear sump allows you to see your filter in action. Included with the unit is a mounting bracket, housing wrench, filter life indicator, built in shut-off, bypass, and pressure relief valve.
Pentek 150071 3/4" #10 Standard Clear Filter Housing with Pressure Relief
- Standard filter housing for residential, commercial, and industrial applications
- Clear styrene-acrylonitrile (SAN) for on-site viewing of flow and cartridge condition
- Holds a 10″ x 2-1/2″ sediment or carbon filter cartridge (sold separately)
- Pressure relief button for easier cartridge replacement
- Initial pressure drop of 1 psi at a flow rate of 10 gpm
This Pentek 150071 3/4″ #10 Standard clear filter housing with pressure relief is suitable for residential, commercial, and industrial applications. The sump is made of clear styrene-acrylonitrile (SAN) for on-site viewing of flow and cartridge condition, and the cap is made of reinforced blue polypropylene for strength and resistance to chemicals. The cap has 3/4″ female National Pipe Thread Taper (NPT) threaded input and output connections and a nitrile butadiene rubber (Buna-N) O-ring to ensure a watertight seal. A pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges. The housing can be used with a 10″ x 2-1/2″ sediment or carbon filter cartridge (sold separately). It has an initial pressure drop of 1 pound per square inch (psi) at a flow rate of 10 gallons per minute (gpm), a maximum operating pressure of 125 psi, and a maximum operating temperature of 125 degrees F (51.7 degrees C). This filter housing meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is for use in various applications, including residential drinking water filtration, food service, and humidifying systems, among others.
Specifications
| Filter cartridge size (H x W) (sold separately) | 10 x 2-1/2 inches (254 x 63.5 mm) |
| Initial pressure drop at 10 gpm | 1 psi |
| Maximum temperature | 125 degrees F (51.7 degrees C) |
| Maximum pressure | 125 psi |
| Maximum dimensions (H x W) | 12-5/8 x 5-1/4 inches (321 x 133 mm) |
| Materials and structural integrity certification | NSF/ANSI standard 42 |
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
Pentek 158643 3/8" #10 3G Slim Line Clear Filter Housing with Bracket and Pressure Relief
- Slim filter housing for low-flow applications with space restrictions
- Clear styrene-acrylonitrile (SAN) for on-site viewing of flow and cartridge condition
- Holds a 10″ x 2-1/2″ sediment or carbon filter cartridge (sold separately)
- Pressure relief button for easier cartridge replacement
- Initial pressure drop of 2 psi at a flow rate of 5 gpm
This Pentek 158643 3/8″ #10 3G Slim Line clear filter housing with integrated mounting bracket and pressure relief is suitable for low flow rate applications that have space restrictions. The sump is made of clear styrene-acrylonitrile (SAN) for on-site viewing of flow and cartridge condition, and the cap is made of reinforced blue polypropylene for strength and resistance to chemicals. The cap has 3/8″ female National Pipe Thread Taper (NPT) threaded input and output connections and a nitrile butadiene rubber (Buna-N) O-ring to ensure a watertight seal. A pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges. The housing can be used with a 10″ x 2-1/2″ sediment or carbon filter cartridge (sold separately). It has an initial pressure drop of 2 pounds per square inch (psi) at a flow rate of 5 gallons per minute (gpm), a maximum operating pressure of 125 psi, and a maximum operating temperature of 125 degrees F (51.7 degrees C). This filter housing meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is for use in various applications, including residential drinking water filtration, food service, and humidifying systems, among others.
Specifications
| Filter cartridge size (H x W) (sold separately) | 10 x 2-1/2 inches (254 x 63.5 mm) |
| Initial pressure drop at 5 gpm | 2 psi |
| Maximum temperature | 125 degrees F (51.7 degrees C) |
| Maximum pressure | 125 psi |
| Maximum dimensions (H x W) | 13-3/8 x 5-3/8 inches (340 x 137 mm) |
| Materials and structural integrity certification | NSF/ANSI standard 42 |
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
Similar items with 4 stars and above
Pentek 158110 3/8" #5 Slim Line Clear Filter Housing
Geekpure Filter Housing 10" for Reverse Osmosis System -1/4 Inch Inlet/Outlet-for 2.5 Inch x 10 Inch Fitlers
- Replacement housing for Geekpure RO system,Widely used in RO system or pre-filtration.
- Fit with most RO systems using standard 10″ filters.But different brand,the injection mould is totally different,NOTE:PLEASE REPLACE HEAD AND HOUSING BODY TOGETHER.
- INLET-OUTLET-1/4″ female threaded in and out fittings.matched quick fitting ASIN:B078VQN6TZ .
- SIMPLE INSTALLATION-Easy to replace.Food grade Polyethylene will not cause pollution to water.
- Pack of 3. 1 x Filter housing , 2 x O rings . matched wrench ASIN: B07D9JWRYQ .
Hydronix HF3-10CLWH34PR 10" Clear Housing with White Rib Cap, 3/4" Ports with Pressure Relief Button
Hydronix HF3 Series Slim Rib Cap Filter Housings have pressure relief (PR) buttons and are ideal for typical applications such as pre- and post-filtration for RO systems, under sink filters, counter top systems, ice machines, food service and other applications. Hydronix HF2 Series housings are available in a variety of colors and are made to house 2.5″ diameter cartridges. Most 9 7/8″ and 10″ cartridges fit easily and caps are available in 1/4″, 3/8″ and 1/2″ female NPT ports.
10" Big Blue Housing Whole House Water Filtration System 1" Inlet/Outlet Brass Ports Pressure Relief Button, Meets NSF Standards & Regulations COMPATIBLE to BB-20B, 150233, 150235 (1 Set, Transparent)
- ???? DURABLE STRUCTURE: 10” Transparent Big Blue Housing Set is proper for high-flow and heavy sediment applications. The transparent housing body is made of reinforced polypropylene for strength and resistance to chemicals, and the black cap is made of high-flow polypropylene for toughness. The black cap has 1″ inlet / outlet brass ports which allowed better sealed connections to the corresponding pipes.
- ???? POINT OF USE: Those Housings for use in various high-flow applications and is usually placed in the main water line entering the house including, but not limited to residential drinking water filtration, well water filtration, food service, and irrigation. Extends life of Washing Machines, Water Heaters & Other Household Appliances Removing Chlorine, Taste, Odors & Other Particles
- ???? EASY TO OPERATE: There is rubber O-ring on the top of the housing body to ensure a watertight seal. A pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges.
- ????ACCEPTS 10”x 4.5” Big Blue Water Filter Cartridges as: Ronaqua, 3M 70020162437, DuPont WFHDC8001, Watts MAXETW-FF975, KX Technologies 32-425-125-975, ClearChoice 84629, Liquatec CB-450-975-05, SDF-45-1005, MATRIKX-CTO2-HD10, Pelican CB-BB-10, EP-BB, EPM, CCBC & CEP Series, Fette Filter COMIN18JU061077, Pentek 155548-43, DGD-5005, Trojan CB-BB-10, WCBFF975, American Plumber WDGD-5005, Aqua-Pure AP810, AP814 and AP811, Hydronix SDC-45-1005, Pentair DGD-5005, 9108-44, DEV9108-44 (Sold Separately)
- ???? WELL-MATCHED MODELS OF HOUSINGS: Pentek 150237, 150469, 153029 #10, BIG-CLEAR-LX-10 and A48249, Aqua Filter Plus 150237-INSTKIT, BLUONICS BLBB20GAC, BLBBC10 and BLBB10x2, iSpring HB18B, OMNIFilter BF7-S-05 and BF7-S-S06, American Plumber W10-PR, Watts W10FFPH1CBPR, SimPure RSWHB001Z_S8, AB-WH10BBN, Hydronix HX-HF45-10CLBK10 and HF45-10BLBK15, Geekpure BB-10T and BB-10B, EcoPure EPWO4, Culligan HD-950A, Aquaboon AB-WH10BB-1S10BB5M
Similar items with 4 stars and above
Hydronix HF2-10CLWH12 10" Clear Body, White Flat Cap 1/2"
Conclusion
By our suggestions above, we hope that you can found water filter housing clear for you.Please don’t forget to share your experience by comment in this post. Thank you!
