minmommy 
Nowadays, there are so many products of thermowell heating element in the market and you are wondering to choose a best one. You have searched for thermowell heating element in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings thermowell heating element which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Southbend Range 1178007 Heating Element
Product Description
1178007, ELEMENT, HEATING, WITH THERMOWELL. Southbend Range Genuine OEM replacement part. For over one hundred years, Southbend has produced the finest in heavy-duty ovens, ranges and steamers. Use genuine OEM parts for safety reliability and performance.
From the Manufacturer
1178007, ELEMENT, HEATING, WITH THERMOWELL. Southbend Range Genuine OEM replacement part. For over one hundred years, Southbend has produced the finest in heavy-duty ovens, ranges, and steamers. Use genuine OEM parts for safety reliability and performance.
Inkbird ITC-308 Max.1200W Heater, Cool Device Temperature Controller, Carboy, Homebrew, Fermenter, Greenhouse Terrarium Temp. Control
- [Convenient Design] Plug and play design, easy to use. Support °C/°F display.
- [Dual Relay Output] Be able to connect with refrigeration and heating equipment at the same time.
- [Dual Display Window] Be able to display measured temperature and set temperature at the same time.
- [Buzzer Alarm] High and low temperature alarms are available when the temperature is over or the sensor is with issue.
- [Warranty & Safe] Warranty: 1 year. Maximum output load: 1100W(110V). It is with temperature calibration and compressor delay which can protect your refrigeration.
Specification:
Temperature Control Range: -50~99°C / -58~210°F
Temperature Resolution: 0.1°C / 0.1°F Temperature Accuracy: ±1°C (-50~70°C) / ±1°F (-50~160°F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Body Dimension: 140x68x33mm (5.5×2.7×1.3inch)
Socket Dimension: 85x42x24mm (3.3×1.7x1inch)
Ambient Temperature: -30~75°C / -22~167°F
Storage Temperature: -20~60°C / -4~140°F
Humidity: 20~85% (No Condensate)
Warranty: 1 Year
Package Included:
1x ITC-308 Temperature Controller
1x Manual
Fermentation Temperature Control Kit (#7 Stopper)
- MAKE GREAT BEER, WINE & LARGE-BATCH KOMBUCHA! This kit has everything you need to have precise heating control of your fermentation temperature. It makes all the difference when trying to make great homebrew.
- HEATING AND COOLING capable temperature controller allows for easy conversion from controlled heating to controlled cooling for fermentation. Just switch out the included heater for a cooling device! (Cooling device not included)
- ALL COMPONENTS FIT YOUR STANDARD GLASS CARBOY. This kit includes a fermentation heater, temperature controller, and #7 stopper thermowell. BONUS: 3 piece airlock included
- ELIMINATE SANITATION ISSUES: Includes a thermowell which allows the probe to be in the wort without risking contamination. The #7 stopper fits standard glass carboys and includes a hole for a standard airlock.
- EASY TO USE. Attach your heater with electrical tape, set your temp, and you are ready to make great beer, wine, or Kombucha. Carboy not included.
The Temperature Control Kit from The Weekend Brewer is all you will ever need to have a perfectly fermented homebrew or kombucha. Includes 3 piece airlock, heat wrap, heating and cooling temperature controller, and #7 silicone thermowell for glass carboys. Carboy not included.
279838 8565582 Dryer Heating Element Replacement for Whirlpool Kenmore Sears Maytag KitchenAid Magic Chef
- Replaces 279838 PS334313 AP3094254 3398064 3403585 8565582 AH334313 EA334313, EED4400WQ0
- Rated 240 volts, 5400 watts, 2-5/16″ Male terminals
- Highest quality nickle used in the wire
- Replacement for Whirlpool, Kenmore, Sears, Maytag, KitchenAid, Magic Chef, Amana, Admiral, Norge, Estate, Inglis, Roper, Crosley
This is a dryer heating element replacement for Whirlpool, Kenmore, Sears, Maytag, KitchenAid, Magic Chef, Amana, Admiral, Norge, Estate, Inglis, Roper, and Crosley. If your dryer does not heat first, check for a blown thermal fuse on the blower housing before replacing the heating element. In most cases, the heating element will have a break in the element if defective. Rated 240 volts and 5400 watts. It replaces 279838 PS334313 AP3094254 3398064 3403585 8565582 AH334313 EA334313, EED4400WQ0. Manufacturers’ part numbers are solely for identification. All materials supplied by us are our replacements for manufacturers’ parts. All product and company names are trademarks or registered trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
279838 Dryer Heating Element 3977767 3392519 Dryer Heating Element Kit 3977393 Thermal Fuse & 3387134 Dryer Thermostat for Whirlpool, Kenmore, Roper, Maytag, Estate, Inglis, KitchenAid, Crosley, Amana
- ❤Package included: 1 x 3977767 dryer thermostat, 1 x 3387134 dryer thermostat, 1 x 3392519 dryer thermal fuse, 1 x 3977393 thermal fuse,1 x 279838 dryer heating element.
- ❤Ideal fit for many brand: The dryer heating element replacement pats fit for most top name brand (Whirlpool, Kenmore, Maytag, KitchenAid, Roper Dryer, Crosley, Estate, Amana, Inglis, Admiral, Magic Chef, Jenn-Air).
- ❤100% Quality assurance！ The dryer heating element is made of premium high quality material, non OEM parts but meets OEM manufacturing requirements. 279838 dryer heating element is rated at 5400 Watts 240 Volts and has 2- 5/16″ male terminals.
- ❤Warm prompt: 279838 heating element is strung with a coiled wire that is made out of a nickel and chrome alloy. The coiled wire on the heating element receives and resists a controlled electric dryer current, which allows the wire to heat up. The heat produced is used to dry the clothes in your dryer. In order to complete this repair you will need a 1/4 inch nut driver and a pair of needle nose pliers.
- ❤After sale guarantee: 100% money back guarantee – For whatever reason, you are not satisfied, you can request a replacement or a full refund. Customer satisfaction is our tireless pursuit. If you are dissatisfied with the product, don’t be too quick to leave a negative comment. Contact us! We will show you a sincere attitude and satisfactory solution.
LANDIS & GYR 536-767-RK for 536-767-XX SENSORS. Includes Sensing Element, 4-20MA Transmitter and MISCELANEOUS Components. THERMOWELL is NOT Included.
Winters TAS Series Brass Dual Scale Industrial 5AS Straight Thermometer with Thermowell, 30-240 F/C Range, +/-2 Percent Accuracy, 1/2” NPT Bottom Mount
An all-purpose, economical and case. Separable thermowell. Impact resistant polypropylene. Red liquid-in glass. Dual scale (degree F and degree C). Bottom connected. 1/2″ NPT process connection. 5 year warranty. Applications: Hot water lines, boilers, heating, ventilation and air conditioning. Scale: aluminum, painted white with black markings. Case: 5″ black polypropylene. Lens: glass. Tube: glass, cushioned. Sensing liquid: kerosene, tinted red. Stem: brass. Swivel nut: brass. Thermowell: brass 1/2″ NPT standard. Operating pressure: maximum 710 psi (50 kg/square centimeters). Ambient temperature: -40 degree F to 122 degree F. Process temperature: -40 degree F to 400 degree F. Accuracy: +/-2 percent of full Scale. Enclosure rating: IP54.
Homebrew 1/4in Stainless Steel Thermowell and no. 7 Bung Stopper for Glass Carboy Fermentation Thermometer Probe
- MONITOR FERMENTATION: The G. Francis Homebrew 1/4″ Stainless Steel Thermowell and #7 Bung Stopper for Glass Carboy Fermentation Temperature Thermometer Probe gives your temperature controller accurate readings to keep your beer at a precise temperature for sterile temperature control
- Heating kit and carboy not included
- KEEP OUT CONTAMINATION: Place a probe inside the tube and then inside your beer fermentation vessel (not included) to monitor your wort while keeping out harmful contaminants and aeration
- USE YOUR CARBOY: Compatible with most standard glass carboys, temperature controllers, and airlocks
- The thermowell is entirely removable from the stopper to fit different sized configurations (#10 stoppers are recommended for plastic carboys)
- COMBINATION SET: In addition to the thermowell, the included #7 bung plug stopper has an airlock hole with a 0.25-inch (6mm) diameter for standard size airlock to prevent your carboy from building up pressure
- The stopper has a 1.3-inch (33mm) top diameter and 0.9-inch (24mm) bottom diameter and includes all hardware needed for exact temperature control even in colder environments
- SECURE FIT: Constructed with a stainless-steel tube and silicone bung stopper
- Make sure the carboy surface and the stopper itself are dry in order for it to stay secure once pressed into carboy
- Approximate 0.25-inch (6mm) tube inside diameter (ID)
- 15.5-inch (39.4cm) overall length
- 14.25-inch (36.2cm) tube and 1.1-inch (2.8cm) stopper
Homebrew #7 Stopper Thermowell
- PERFECT TEMPERATURE CONTROL. Use this stopper thermowell to ensure your temperature controller probe is getting the most accurate reading
- SANITARY. Use of this thermowell will ensure your wort stays contamination free
- AIRLOCK HOLE. The stopper has 2 holes, one for the thermowell and one for your airlock
- Fits most glass carboys. Ensure the #7 stopper is the correct size for your carboy before purchasing.
Use this stopper thermowell to get your temperature controller probe in contact with your beer Without risking contamination. The included #7 stopper fits most standard glass carboys.
Conclusion
By our suggestions above, we hope that you can found thermowell heating element for you.Please don’t forget to share your experience by comment in this post. Thank you!
