The 9 Best Sub Micron Water Filter

The Harmsco HB-20-0-35W water filter is a 0.35 micron, highly efficient filter cartridge made of pleated Polyester-PLUS Filter media for low pressure drop, high flow cap. The Harmsco HB-20-0-35W water filter’s pleated design offers up to 50% more surface area than competitive filters resulting in superior performance and increased contaminant removal, and longer filtration runs for fewer changeouts and less maintenance. Low pressure drop. Thermally bonded for longer usable life. FDA approved materials–NSF 61 certified and has an Engineered media for superior performance.

Replacement 0.35 Sub-micron Post-Filter for Whole House Water Filter Systems Removes particulates 60 times smaller than the eye can see. This includes insoluble minerals and cysts. The addition of this post-filter is considered a polishing agent and adds a level of protection for your household in the event of an outbreak of cryptosporidium or giardia. This cartridge should be replaced every 6-12 months. Replacements made easy – no plumber required.

Compatible to Watts Pack of 4 Filter (WPC0.35-975) 9.75″X2.75″ 0.35 Micron Pleated Sediment Filters Pleated cartridges outperform wound, spun, melt blown, resin bonded and other “depth” style filter elements because our pleated cartridges provide increased surface area, lower pressure drop and longer service life. Our 100% synthetic media is washable and cleanable, five micron and up, to reduce filtration costs. Features: Filter media is pleated Cellulose-FREE, 100% synthetic media Individually wrapped for purity Washable and reusable Benefits Greater dirt holding capacity; more surface area Lower initial pressure drop; higher flow rates Longer life Reduced filtration costs Superior performance with no additives or binders to break down which may cause foaming and filter degradation. Additional security at no additional charge. Reduce filter replacement costs. Easily identify standard OD replacements.

Watts pleated cartridges outperform wound, spun, melt blown, resin bonded and other “depth” style filter elements because our pleated cartridges provide increased surface area, lower pressure drop and longer service life. Our 100% synthetic media is washable and cleanable, five micron and up, to reduce filtration costs. Features:Filter media is pleatedCellulose-FREE, 100% synthetic mediaIndividually wrapped for purityWashable and reusable BenefitsGreater dirt holding capacity; more surface areaLower initial pressure drop; higher flow ratesLonger lifeReduced filtration costsSuperior performance with no additives or binders to break down which may cause foaming and filter degradation.Additional security at no additional charge.Reduce filter replacement costs.Easily identify standard OD replacements. Washable and reusable: Watts pleated cartridges are washable and reusable, five micron and up to reduce filtration costs. For best results, direct spray into the pleats to dislodge the sediment Watts pleated specifications:Maximum temperature: 140°F (60°C)Minimum temperature: 40°F (4.4°C)Maximum pressure: 40 psidRecommended change out: 25 psidFilter Media: Cellulose-free synthetic pleated polypropyleneMaterial – center tube: PolypropyleneMaterial – end caps: Molded PolyurethaneID: 1-1/6..

The CBSM-2510 0.5 sub-micron filter filters and reduces VOCs, Cysts, Pesticides, Chlorine, Taste and Odor for great tasting water. A perfect filter for perfect drinking water and compatible with any system using standard size 2.5″ x 10″ filters. This filter is the OEM replacement for the following systems: CNTP-1W countertop drinking water systems. CNTP-1C countertop drinking water systems. U200 Under-sink drinking water systems (2nd stage filter). Also uses CB5-2510 for 1st stage filter. U200UV Under-sink drinking water systems (2nd stage filter). Also uses CB5-2510 for 1st stage filter. U300 Under-sink drinking water systems (3rd stage filter). Also uses SD1-2510 (1st stage) and KDF05-10 for 2nd stage filter. U300UV Under-sink drinking water systems (3rd stage filter). Also uses SD1-2510 (1st stage) and KDF05-10 for 2nd stage filter. Temperature Rating: 40F to 180 F (4.4 C to 82.2 C). Maximum Operating Presssure: 250 PSI. Maximum Differential Pressure: 100 PSID. Collapse Pressure: 200 PSID. Materials of Construction: Carbon: Coconut Shell Activated Carbon. Netting: Polypropylene. End Caps: Polypropylene. Gaskets: Neoprene. Outer Wrap: Polypropylene. WARNING: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. NOTE: Performance capacity depends on system design, flow rate and certain other application conditions. After installation flush the cartridge for 2-5 minutes to remove all traces of fine particles before using the water. Micron ratings based on 85% or greater removal of given particle size.

Product Description

Product Description The R50-BBSA Basic Whole House Filter for the reduction of coarse sediment is designed to reduce coarse sediment to provide visibly clearer water that helps protect your appliances and keeps your faucets flowing freely. From the Manufacturer Culligan’s R50-BBS Level-1 Basic Filtration 50 Micron Heavy-Duty replacement sediment filter cartridge reduces sediment, rust, scale, dirt, and coarse sand. This filter cartridge is ideal for high-flow and well-water applications and has a filter life of up to 6 months or 24,000 gallons.

From the Manufacturer

Culligan’s R50-BBS Level-1 Basic Filtration 50 Micron Heavy-Duty replacement sediment filter cartridge reduces sediment, rust, scale, dirt, and coarse sand. This filter cartridge is ideal for high-flow and well-water applications and has a filter life of up to 6 months or 24,000 gallons.

Watts pleated cartridges outperform wound, spun, melt blown, resin bonded and other “depth” style filter elements because our pleated cartridges provide increased surface area, lower pressure drop and longer service life. Our 100% synthetic media is washable and cleanable, five micron and up, to reduce filtration costs. Features:Filter media is pleatedCellulose-FREE, 100% synthetic mediaIndividually wrapped for purityWashable and reusable BenefitsGreater dirt holding capacity; more surface areaLower initial pressure drop; higher flow ratesLonger lifeReduced filtration costsSuperior performance with no additives or binders to break down which may cause foaming and filter degradation.Additional security at no additional charge.Reduce filter replacement costs.Easily identify standard OD replacements. Washable and reusable: Watts pleated cartridges are washable and reusable, five micron and up to reduce filtration costs. For best results, direct spray into the pleats to dislodge the sediment Watts pleated specifications:Maximum temperature: 140°F (60°C)Minimum temperature: 40°F (4.4°C)Maximum pressure: 40 psidRecommended change out: 25 psidFilter Media: Cellulose-free synthetic pleated polypropyleneMaterial – center tube: PolypropyleneMaterial – end caps: Molded PolyurethaneID: 1-1/6.

Conclusion

By our suggestions above, we hope that you can found sub micron water filter for you.Please don’t forget to share your experience by comment in this post. Thank you!