minmommy 
Nowadays, there are so many products of solar hot water pump in the market and you are wondering to choose a best one. You have searched for solar hot water pump in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings solar hot water pump which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
11,503 Reviews Scanned
bayite BYT-7A015 DC 12V Solar Hot Water Heater Circulation Pump with DC Power Supply Adapter Low Noise 3M Head 8LPM 2.1GPM
- Circulation pump is non-self-priming pump (0 Suction Height). Max Flow Rate: 2.1GPM, Max Discharge Head: 9.8ft. Max system pressure: 10Bar(145PSI) . This doesn’t mean the pump produces 145PSI. It means the pump can be connected to the system less than 145PSI pressure
- 1/2″ Male thread on the pump. The OD of the brass coupler is 3/8”(10mm). Plug type: 2.1mm x 5.5mm female
- Power source: DC 12V(POWER ADAPTER INCLUDED). Rated current: 0.7A, Brushless Motor, Low noise: 30db at 1 metre, Service life: 30000 hours. Please note: If you use this pump for circulating wort it should be cleaned out after using it
- Max circulating water temperature: 100°C/212°F. It’s submersible but can’t be immersed in hot water exceeding 50°C/122℉
- One year warranty: replacement or full refund without return
It’s perfect for the home solar water heating systems or other circulation pump application.
Brushless Motor,Super long working life,low consumption and low noise
Power source: DC 12V
Rated current: 0.7A
Low noise: 30db at 1 metre
Service life: 30000 hours up
Inlet/Outlet: 1/2″ male thead. Fit both 1/2″ NPT and BSP female thead. We’ve tested. w/ two brass coupler
Circulation pump is non-self-priming pump (0 Suction Height).
Max Flow Rate: 8L/Min(2.1GPM)
Max Water Head: 3 metre(9.8ft)
Max system pressure: 10Bar(145PSI). This doesn’t mean the pump produces 145PSI. It means the pump can be connected to the system less than 145PSI pressure.
Max circulating water temperature: 100°C/212°F. Can’t be immersed in hot water exceeding 50°C/122℉
Please note: If you use this pump for circulating wort it should be cleaned out after using it.
Item included:
1x DC 12V Solar Hot Water Circulation Pump
1x AC 110V- 240V to DC 12V 2A Power Supply Adapter
bayite BYT-7A006 DC 12V Solar Hot Water Heater Circulation Pump Low Noise 3M Discharge Head 2.1GPM
- Circulation pump is non-self-priming pump (0 Suction Height). Max Flow Rate: 2.1GPM, Max Discharge Head: 9.8ft. Max system pressure: 10Bar(145PSI) . This doesn’t mean the pump produces 145PSI. It means the pump can be connected to the system less than 145PSI pressure
- 1/2″ Male thread on the pump. The OD of the brass coupler is 10mm. NO POWER ADAPTER INCLUDED
- Power source: DC 12V(NOT INCLUDED), Rated current: 0.7A, Brushless Motor, Low noise: 30db at 1 metre, Service life: 30000 hours. Please note: If you use this pump for circulating wort it should be cleaned out after using it
- Max circulating water temperature: 100°C/212°F. It’s submersible but can’t be immersed in hot water exceeding 50°C/122℉
- One year warranty: replacement without return
bayite BYT-7A014 DC 12V Solar Hot Water Heater Circulation Pump Low Noise 3M Discharge Head 2.1GPM
- Circulation pump is non-self-priming pump. Max Flow Rate: 2.1GPM, Max Discharge Head: 9.8ft
- 1/2″ Male thread on the pump. The OD of the brass coupler is 10mm. Plug type: 2.1mm x 5.5mm female. NO POWER ADAPTER INCLUDED
- Power source: DC 12V(NOT INCLUDED), Rated current: 0.7A, Brushless Motor, Low noise: 30db at 1 metre, Service life: 30000 hours
- Max circulating water temperature: 100°C/212°F. It’s submersible but can’t be immersed in hot water exceeding 50°C/122℉
- One year warranty: replacement without return
It’s perfect for the home solar water heating systems or other circulation pump application.
Brushless Motor,Super long working life,low consumption and low noise
Power source: DC 12V
Rated current: 0.7A
Low noise: 30db at 1 metre
Service life: 30000 hours up
Inlet/Outlet: 1/2″ male thead. Fit both 1/2″ NPT and BSP female thead. We’ve tested. w/ two brass coupler
Max Flow Rate: 8L/Min(2.1GPM)
Max Water Head: 3 metre(9.8ft)
Max system pressure: 10Bar(145PSI)
Max circulating water temperature: 100°C/212°F. Can’t be immersed in hot water exceeding 50°C/122℉
Package included:
1x bayite DC 12V Circulation Water Pump(NO POWER ADAPTER INCLUDED)
bayite BYT-7A014A DC 12V Solar Hot Water Heater Circulation Pump with DC Power Supply Adapter Low Noise 3M Head 8LPM 2.1GPM
- Circulation pump is non-self-priming pump. Max Flow Rate: 2.1GPM, Max Discharge Head: 9.8ft
- 1/2″ Male thread on the pump. The OD of the brass coupler is 10mm. Plug type: 2.1mm x 5.5mm female. NO POWER ADAPTER INCLUDED
- Power source: DC 12V(Comes with a AC 110v to DC 12v power adapter), Rated current: 0.7A, Brushless Motor, Low noise: 30db at 1 metre, Service life: 30000 hours
- Max circulating water temperature: 100°C/212°F. It’s submersible but can’t be immersed in hot water exceeding 50°C/122℉
- One year warranty: replacement without return
It’s perfect for the home solar water heating systems or other circulation pump application.
Brushless Motor,Super long working life,low consumption and low noise
Power source: DC 12V
Rated current: 0.7A
Low noise: 30db at 1 metre
Service life: 30000 hours up
Inlet/Outlet: 1/2″ male thead. Fit both 1/2″ NPT and BSP female thead. We’ve tested. w/ two brass coupler
Max Flow Rate: 8L/Min(2.1GPM)
Max Water Head: 3 metre(9.8ft)
Max system pressure: 10Bar(145PSI)
Max circulating water temperature: 100°C/212°F. Can’t be immersed in hot water exceeding 50°C/122℉
Item included:
1x bayite DC 12V Circulation Water Pump
1x AC 110v to DC 12v power adapter
Happybuy RS15-6 Hot Water Recirculating Pump 110V Circulation Pump 3/4-Inch NPT 3-speed Recirculation Pump 9.5 Gpm for Water Heater System
- 【MAIN PARAMETER】 – The hot water circulation pump features NPT 3/4 inch (19.05 mm) inlet/outlet. Voltage/Frequency: 110-120V, 60Hz. Rated power: 93/67/46 W. Max pressure: 145 psi (10 bar),the hot water circulation pump with three-speed control. Flow: 36/29/20 LPM (9.5/7.66/5.28 GPM). Max head: 6/4.9/4 m (20/16/13 ft)
- Pump housing: Aluminum. Impeller: Corrosion-resistant, composite, PES. Shaft: 45 # steel. Bearing: Carbon axia
- 【CONVENIENT】 – Easy installation, just need a wrench to connect the pump to the pipeline, saving you the cost of plumbers
- Instant hot water, waiting for 2-3 minutes in the past, now it takes only 15 seconds to get hot water (the kitchen takes about 1 minute to get hot water due to low flow restriction)
- 【HUMANIZED DESIGN】 -Prevent pipes from freezing in winter, especially for cold winter areas. In addition, if your pipes pass through the floor, the floor will also become warm.
- 【ADVANTAGE】 – The hot water circulation pump features high efficiency with low consumption. High temperature resistance, anti-fraying, high flow and leak-tightness. Super silent, environmental friendly,saving energy, running power, reducing the waste of cold water and waiting time, suitable for water scarce areas, such as desert areas
- 【WIDE APPLICATION】 – Our hot water circulation pump RS15-6 is suitable for a wide range of applications, for city buildings, suburban villas, houses, water and pressurized with industrial equipment, air conditioning, boilers, solar circulating water, hot water circulating warm and so on
KOLERFLO 3/4 Inch Hot Water Circulating Pump 3-Speed Circulation Water Pump for Solar Heater System(RS15-6 Red)
- Rated power: 93/67/46 W. NPT 3/4 inch (19.05 mm) inlet/outlet. Voltage/Frequency: 110-120V, 60Hz. Max pressure: 145 psi (10 bar),the circulation pump with three-speed control. Flow: 36/29/20 LPM (9.5/7.66/5.28 GPM). Max head: 6/4.9/4 m (20/16/13 ft)
- Pump housing: Aluminum. Impeller: Corrosion-resistant, composite, PES. Shaft: 45 # steel. Bearing: Carbon axia.
- Easy installation, only need a wrench to connect the pump to the pipeline, saving you the cost of plumbers
- Instant hot water, waiting for 2-3 minutes in the past, now it takes only 15 seconds to get hot water.
- Prevent pipes from freezing in winter, especially for cold winter areas. In addition, if your pipes pass through the floor, the floor will also become warm.
- The circulation water pump features high efficiency with low consumption. High temperature resistance, anti-fraying, high flow and leak-tightness. Super silent, environmental friendly,saving energy, running power, reducing the waste of cold water and waiting time, suitable for water scarce areas, such as desert areas.
- KOLERFLO circulation water pump RS15-6 Used in Suitable for city buildings, suburban villas, houses, water and pressurized with industrial equipment, air conditioning, boilers, solar circulating water, hot water circulating warm and so on.
Product Details
Model: RS15-6
Rated Power: 93/67/46W
Outlet: 3/4 inch
Max Flow: 36/29/20L/min
Rated Head: 20/16/13m
Volt/Freq: 110-120V/60Hz
Applications
Used in Suitable for city buildings, suburban villas, houses, water and pressurized with industrial equipment, air conditioning, boilers, solar circulating water, hot water circulating warm and so on
Advantages
1.High efficiency, high flow, leak-tightness, low consumption
2.No noise environmental protection, ease of installation
3.No leakage, low noise, environmental protection, aesthetics, ease of installation and so on
4.Built-in high sensitive electronic sensors with three-speed control
Performance Datas
1) Suitable for medium: Hot water and ethanol maximum ratio of 1:1
2) Performance: Liquid temperature range: 0℉ – +212℉Maximum working pressure 10bar
3) Ambient temperature: not higher than 40
4) Voltage: 110-120V(±10%) ,Frequency: 60Hz.
5) Motor: Protection class IP44 Insulation class F
6) Material: Stainless Steel, PP, ceramics
7) Mounting position: Shaft horizontal mounting
8) Pump settings: Single-phase pipeline pump 3 files manually controlled single-phase motor is not overloaded casting pump length 130 mm
Similar items with 4 stars and above
S5-15PV-SS – 3 GPM – Food Grade – 12V Solar Hot Water Pump – Can be run by a 15W solar panel
Made especially for the high temperatures & high pressures generated by solar hot water systems. The plastic housing is built with special plastics and the metal fittings are molded into the plastic housing. It has also become a very popular pump with beer brewing enthusiast!
FERRODAY Magnetic Drive Pump Wort Pump Food Grade High Temperature Stainless Head Magnetic Pump 15RM with 1/2"NPT thread Home Brew
- 【Safely Transfer Liquid】 : Transferring liquids is an important part of any brew operation, and the most easy and safe way to transferring liquids is to attach this magnetic pump, the propeller will magnetically circulates liquids for you. Please note: Moving giant vessel with hot wort yourself is not safe.
- 【Quiet and Efficient】 : The pump’s main shaft is separated from the impeller, which has damping and anti-Vibration function, aim to reducing the influence of motor vibration on the pump. Realized a high efficiency smooth running, and excellent quiet circulation.
- 【Solid Magnetic Pump】 : Fully-sealed magnetic pump, motor with connecting the magnetic shaft and magnetic propeller, all magnetically coupled for enhanced operation. This is a High output volume and quiet operation industrial/ home brew equipment. Great heat resistant up to 120℃/ 248℉.
- 【Easy to Use】 : Prime by running liquid through the pump prior to turning it on
- The liquid travels from the bottom of the valve into the pump, and once the pump is powered on, the propeller will start to circulate the liquids
- Perfect for transferring and circulation.
- 【Life Time Service】We are committed to offer you high quality product as well as superior service! Please feel free to tell us if any problems, we would try our best to satisfy you. Lifetime technical support.
Conclusion
By our suggestions above, we hope that you can found solar hot water pump for you.Please don’t forget to share your experience by comment in this post. Thank you!
