minmommy 
Nowadays, there are so many products of pentek sediment r30b water filter cartridge in the market and you are wondering to choose a best one. You have searched for pentek sediment r30b water filter cartridge in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings pentek sediment r30b water filter cartridge which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
33,897 Reviews Scanned
Pentek DGD-5005 Spun Polypropylene Filter Cartridge, 10" x 4-1/2"
- Reduces sand, silt, scale, and rust particles in residential, commercial, and municipal drinking water
- Combines two separate gradient layers for higher efficiency and dirt-loading capacity
- Spun polypropylene for resistance to chemicals and bacteria
- Initial pressure drop of less than 1 psi at a flow rate of 10 gpm
- Temperature range of 40 to 145 degrees F (4.4 to 62.8 degrees C).
This Pentek DGD-5005 spun polypropylene filter cartridge reduces sand, silt, scale, and rust particles in residential, commercial, and municipal drinking water. It has two separate gradient layers for higher particle reduction efficiency and dirt-loading capacity than standard spun or string-wound cartridges. The nominal filtration rating of the pre-filter layer is 50 microns, and the rating of the post-filter layer is 5 microns. The filter is made of spun polypropylene fibers for resistance to chemicals and bacteria. It has an initial pressure drop of less than 1 pound per square inch (psi) at a flow rate of 10 gallons per minute (gpm), and operates over a temperature range of 40 to 145 degrees F (4.4 to 62.8 degrees C). This spun polypropylene filter cartridge meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is used for treatment of residential, commercial, and municipal drinking water.
Specifications
| Nominal filtration rating (pre-filter) | 50 microns |
| Nominal filtration rating (post-filter) | 5 microns |
| Initial pressure drop at 10 gpm | <1> |
| Temperature range | 40 to 145 degrees F (4.4 to 62.8 degrees C) |
| Maximum dimensions (H x W) | 10 x 4-1/2 inches (254 x 114 mm) |
| Materials certification | NSF/ANSI standard 42 |
The nominal filtration rating is for a particle removal efficiency of 85%.
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
Pentek 155358, DGD-5005-20 Dual Gradient Density Polypropylene Sediment Cartridge
This Pentek DGD-5005-20 spun polypropylene filter cartridge reduces sand, silt, scale, and rust particles in residential, commercial, and municipal drinking water. It has two separate gradient layers for higher particle reduction efficiency and dirt-loading capacity than standard spun or string-wound cartridges. The nominal filtration rating of the pre-filter layer is 50 microns, and the rating of the post-filter layer is 5 microns. The filter is made of spun polypropylene fibers for resistance to chemicals and bacteria. It has an initial pressure drop of less than 1 pound per square inch (psi) at a flow rate of 20 gallons per minute (gpm), and operates over a temperature range of 40 to 145 degrees F (4.4 to 62.8 degrees C). This spun polypropylene filter cartridge meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is used for treatment of residential, commercial, and municipal drinking water.
Specifications
| Nominal filtration rating (pre-filter) | 50 microns |
| Nominal filtration rating (post-filter) | 5 microns |
| Initial pressure drop at 20 gpm | <1> |
| Temperature range | 40 to 145 degrees F (4.4 to 62.8 degrees C) |
| Maximum dimensions (H x W) | 20 x 4-1/2 inches (508 x 114 mm) |
| Materials certification | NSF/ANSI standard 42 |
The nominal filtration rating is for a particle removal efficiency of 85%.
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
Pentek C1-20 Carbon-Impregnated Cellulose Filter Cartridge, 20" x 2-1/2", 5 Micron
- Reduces fine sediment and chlorine taste and odor in residential drinking water
- Nominal filtration rating of 5 microns
- Carbon-impregnated cellulose media with a polyester backing and external polyethylene netting for strength
- Initial pressure drop of 1 psi at a flow rate of 5 gpm
- Temperature range of 40 to 125 degrees F (4.4 to 51.7 degrees C)
This Pentek C1-20 carbon-impregnated cellulose filter cartridge reduces fine sediment and chlorine taste and odor in residential drinking water. It has a nominal filtration rating of 5 microns at an efficiency of 85%. The filter will reduce free available chlorine (FAC) at 2 parts per million (ppm) by at least 75% in up to 5,000 gallons at a flow rate of 2 gallons per minute (gpm). The cartridge is made of cellulose media that has been impregnated with powdered activated carbon (PAC), with a polyester backing and external polyethylene netting for strength. It has an initial pressure drop of 1 pound per square inch (psi) at a flow rate of 5 gallons per minute (gpm), and operates over a temperature range of 40 to 125 degrees F (4.4 to 51.7 degrees C). This filter cartridge is for use in residential drinking water purification.
Specifications
| Nominal filtration rating | 5 microns |
| Initial pressure drop at 5 gpm | 1 psi |
| Chlorine reduction capacity | 5,000 gallons at 2 gpm |
| Operating temperature range | 40 to 125 degrees F (4.4 to 51.7 degrees C) |
| Maximum dimensions (H x W) | 20 x 2-1/2 inches (508 x 64 mm) |
The nominal filtration rating is for a particle removal efficiency of 85%. Chlorine reduction capacity is the minimum total amount of water for which the free available chlorine (FAC) at a concentration of 2 ppm is reduced by at least 75%.
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
Pentek RFC20-BB Carbon Filter Cartridge, 20" x 4-1/2"
- Reduces chlorine taste and odor in drinking water
- Granular activated carbon (GAC) media with spun polypropylene core and polypropylene end caps for strength
- Porous polyethylene 70-micron outer shell reduces carbon fines and other particles
- Initial pressure drop of 0.90 psi at a flow rate of 4 gpm
- Temperature range of 40 to 125 degrees F (4.4 to 51.7 degrees C)
ICEPURE 5 Micron 10″ x 2.5″ Whole House Sediment Water Filter Replacement Cartridge Compatible with Any 10 inch RO Unit, Culligan P5, Aqua-Pure AP110, WFPFC5002, CFS110, RS14, WHKF-GD05, 4-Pack
- ❄️【NSF 42&
- 372 CERTIFICATION】Certified by WQA against NSF42. The filter can reduce 99% sand, scale, rust, sediment, colloid, particles. Certified by WQA against NSF372, NO Lead containing in the materials. The filter retains mineral substances which is good to health.
- ❄️【MULTI-LAYER DENSITY TECH】The whole house water filter is designed with density three PP layers to remove most particle and sediments. The inner layer is Absolute 5 micron
- the middle layer is nominal 7 micron
- while the outer layer is nominal 10 micron. The multi-layer density tech can capture impurities targetedly and have 30% longer service life than the other common type.
- ❄️【HIGH CAPACITY】The filter can filter up to 13000 gallons depending on water quality. Suggest to replace it every 3- 6 months for the average household for optimal performance depending on the use. Let it bring a wonderful cleaner water experience to your loved ones.
- ❄️【100% Money-Back Guarantee】We promise a no-worry and 30-days Money-Back Guarantee.Your happy experience during shopping and using the filter is our aim.
- &
- #x1F947
- 【COMPATIBLE MODELS】The filter can be used in any standard 10″ x2.5″ RO Unit whole house filtration system and compatible with standard 10 inch X 2.5 inch filter models of Dupont WFPFC5002, Pentek DGD Series, RFC,Aqua Pure AP110, AP110-NP, AP101S, AP101T, AP11S, AP11T, AP12S, AP1610, AP2610, AP51T, SS1-SS12, SS20-SS36, GE FXUSC, Whirlpool WHKF-GD05, WHKF-DWHV, Culligan P5, P5-D, P5A, HF-150, HF-160, HF-360 and DuPont WFPFC5002. Compatible with reverse osmosis filter systems of brands: GE, Culli
Aquaboon 5 Micron 10" x 2.5" String Wound Sediment Water Filter Cartridge | Universal Replacement for Any 10 inch RO Unit | Compatible with WP-5, AP110, CFS110, P5, WFPFC4002, WP-5, CW-MF, 6-Pack
- ???? [DIMENSIONS] 10 inches x 2.5 inches – 1 Pack of 5 Micron String Wound Sediment Filter Cartridges. Universal water filter replacement – fits any standard 10 inch Undersink Reverse Osmosis or Water Filtration systems.
- ???? [QUALITY FILTRATION] Made of 100% Pure POLYPROPYLENE Microfibers. Gradient Density, Multi-Layered, Melt Blown Sediment Filter Cartridge. Contains no binders, agents, solvents, antistatic materials or wetting agents. The String Wound sediment filter is a cost-effective solution for the reduction of sand, silt, rust, dirt and scale particles. Great for well and municipal water.
- ???? [LIFETIME] 4 – 6 months / 20000 – 30000 gallons (depending on the water quality). Replace for great taste of your water.
- ???? [COMPATIBLE REPLACEMENT FILTERS] American Plumber W5W, WP5, 155186-52, WP-5, Ametek WP-5, Aqua-Pure AP110, AP010, Bruner WP-5, Bunn ED-S-1, S5-10, Campbell ISS, ClearChoice 84621, Whirlpool WHKF-WHSW, WHCF-WHSW, Cornelius COR105, COR120, Culligan P5, WP-5, Cuno CFS110, Dupont WFPFC4002, PFC4002, Durable Manufacturing 5WPP10, Ecolab 9320-1135, Everpure DEV910908, Evoqua Advantage FCPXF0905, Flotec RS2-D12-02, RS2-DS, P5 155014-43, RS2-DS12-05, RS2-SS, RS2-D12-01, Hydronix SWC-25-1005.
- ???? [COMPATIBLE FILTERS AND HOUSINGS] Keystone W5, Kleen Plus WP-5, Liquatec SWF-25-1005, Manitowoc K-00173, K-00069, Neo-Pure WPP-25098-05, NuCalgon 4712-87, OmniFilter RS5, RS2-SS, RS5-SS, RS5SS, RS5-DS, RS5-D, RS5-S, RS-5, RS5D, RS5DS, RS5S, Pentair DEV910908, Pentek WP-5, CW-MF, WP5, CW-5, 155071-43, Plymouth Products WP-5, Puremark PFS105, SW05-S, Selecto 101-230, Shelco MS10FP5-B-T, Shurflo 15-052-00, SF31-SEDS, Tier1 RS5-934, US Filter WP-5, etc. Fits most 10 inch Standard size Housings.
6 OF 5 MICRON 10” X 2.5″ STRING WOUND SEDIMENT PP WATER FILTER REPLACEMENT CARTRIDGE BY AQUABOON
The string wound sediment filter is a cost-effective solution for the reduction of sand, silt, rust, dirt and scale particles. String wound filter cartridge is made from 100% polypropylene cord. The filter cartridge is suitable for residential as well as commercial applications. This sediment type filter is suitable for both well and municipal water.
Features:Micron rating: 5 Micron
Dimensions: 10” x 2.5”
Lifetime: Replace two or three times a year, depending on the water quality that comes from the original supply
Larger particles are trapped in the outer layers; smaller particles penetrate deeper
Thermally bonded polypropylene micro fibers for purity and chemical compatibility
No surface binders to reduce flow and increase change-out frequencyCartridge is individually shrink wrapped
COMPATIBLE FILTERS AND HOUSINGS:
American Plumber W5W, WP5, 155186-52, WP-5, Ametek WP-5, Aqua-Pure AP110, AP010, Bruner WP-5, Bunn ED-S-1, S5-10, Campbell ISS, ClearChoice 84621, Whirlpool WHKF-WHSW, WHCF-WHSW, Cornelius COR105, COR120, Culligan P5, WP-5, Cuno CFS110, Dupont WFPFC4002, PFC4002, Durable Manufacturing 5WPP10, Ecolab 9320-1135, Everpure DEV910908, Evoqua Advantage FCPXF0905, Flotec RS2-D12-02, RS2-DS, P5 155014-43, RS2-DS12-05, RS2-SS, RS2-D12-01, Hydronix SWC-25-1005, Keystone W5, Kleen Plus WP-5, Liquatec SWF-25-1005, Manitowoc K-00173, K-00069, Neo-Pure WPP-25098-05, NuCalgon 4712-87, OmniFilter RS5, RS2-SS, RS5-SS, RS5SS, RS5-DS, RS5-D, RS5-S, RS-5, RS5D, RS5DS, Pentair DEV910908, Pentek WP-5, CW-MF, WP5, CW-5, 155071-43, Puremark PFS105, SW05-S, Selecto 101-230, Tier2 RS5-934, US Filter WP-5, etc. Fits most 10 inch Standard size Housings like Dupont PF 2800, PF 3800 Series Housings, WFPF38001C.
Filtrete Standard Capacity Whole House Carbon Wrap Water Filters, Reduces Chlorine Taste & Odor and Sediment, Universal Filter, Sump Style Drop-In Filter, 2-Filters (3WH-STDCW-F02), Grey
Product Description
Filtrete standard Capacity Whole House System Refill, 2-pack Carbon Wrap. Filtrete Standard Capacity Whole House System Filters filter water throughout your home, protecting your plumbing and appliances from Chlorine Taste and Odor, Sand, Sediment, Silt, and Rust. Great for 2 or less bathroom households. Universal filter replacements are available in pleated, string wound, carbon wrap, and grooved filters. Filter life replacements available in 3 and 6 month versions.
From the Manufacturer
Filtrete standard Capacity Whole House System Refill, 2-pack Carbon Wrap. Filtrete Standard Capacity Whole House System Filters filter water throughout your home, protecting your plumbing and appliances from Chlorine Taste and Odor, Sand, Sediment, Silt, and Rust. Great for 2 or less bathroom households. Universal filter replacements are available in pleated, string wound, carbon wrap, and grooved filters. Filter life replacements available in 3 and 6 month versions.
Aquaboon 5 Micron 10" Big Blue Pleated Sediment Water Filter Replacement Cartridge | Whole House Sediment Filtration | Compatible with FXHSC, ECP5-BB, FM-BB-10-5, CP5-BBS, 255490-43, HDC3001, 4-Pack
- ???? [DIMENSIONS] 10 inches x 4.5 inches – 4-PACK Of 5 Micron Big Blue Pleated Sediment Water Filter. Universal replacement – fits most 10 inch Big Blue Water Filter housings.
- ???? [QUALITY FILTRATION] Made of 100% Pure POLYPROPYLENE Microfibers. Whole house sediment filtration. Contains no binders, agents, solvents, antistatic materials or wetting agents. This cartridge is pleated, it provides increased surface area and longer filter life. Pleated cartridge provides “depth” filtration and remove more contaminants, large and fine particles from a drinking water, such as sand, dirt, silt, and rust particles.
- ???? [LIFETIME] 4 – 6 months / 20000 – 30000 gallons (depending on the water quality). Replace for great taste of your water.
- ???? [COMPATIBLE REPLACEMENT FILTERS] Ace Hardware 4021341, American Plumber 155184-51, W5CPHD, Ametek CP5-BB, Pentek 255490-43, ECP5-BB, GE FXHSC, ClearChoice 84634, Culligan 155184, CP5-BB, CP5-BBS, CP5-BBSa, Cuno CFS210-2, Dupont HDC3001, FiltersFast FF10BBP-5, Flomatic FMBB-10-5, Flow-Max FM-BB-10-5, FreshWaterSystems PS-45097-05, Harmsco WB-10-5W, WB-HB-10-5W, Hydronix SPC-45-1005, Keystone GPC5, Liquatec SPF-45-1005, Neo-Pure PS-45097-05.
- ???? [COMPATIBLE FILTERS AND HOUSINGS] OmniFilter RS-15, RS15, Pelican PBB-P10-5, Purwater PC05-BB-S, ShurFlo 15-054-02, Watts FM-BB-10-5, PWPL10BBM5, PWPL10FFM5, etc. Fits most 10 inch Big Blue Whole House systems like Culligan HD-950, Dupont HD1300, GE GXWH-30C, GXWH-35F, GXWH-40L, Hydronix HF45-10BLBK10PR.
4 OF BIG BLUE WHOLE HOUSE 10 INCH X 4.5 INCH PLEATED SEDIMENT WATER FILTER REPLACEMENT CARTRIDGE (5 MICRON)
Pleated Sediment Filter Cartridge outperforms wound, spun, melt blown, resin bonded and other “depth” type filter elements. It provides increased surface area and longer filter life. Additional savings are provided because cartridge is made with 100% synthetic filter media with no binders or additives to leave a residue or contaminants.
Product Details:
Micron Rating: 5 Micron
Dimensions: 10” x 4.5”
Long life / reduced filtration costs
Cleanable and reusable
Wide range of micron ratings available
Shrink wrapped for purity
Lifetime: Replace two or three times a year, depending on the water quality that comes from the original supply.
Benefits VS Melt Blown Sediment:
Long Pressure drop, longer life, reduced filtration costs compared to wound and spun cartridges
No additives or binders, which may cause foaming
Increased dirt holding capacity which results in longer filter life, fewer filter replacement needed, and reduced filtrations costs, comparing to other pleated cartridge suppliers
Increased particle removal efficiency
COMPATIBLE FILTERS AND HOUSINGS:
Ace Hardware 4021341, American Plumber 155184-51, W5CPHD, Ametek CP5-BB, Pentek 255490-43, ECP5-BB, GE FXHSC, ClearChoice 84634, Culligan 155184, CP5-BB, CP5-BBS, CP5-BBSa, Cuno CFS210-2, Dupont HDC3001, FiltersFast FF10BBP-5, Flomatic FMBB-10-5, Flow-Max FM-BB-10-5, FreshWaterSystems PS-45097-05, Harmsco WB-10-5W, WB-HB-10-5W, Hydronix SPC-45-1005, Keystone GPC5, Liquatec SPF-45-1005, Neo-Pure PS-45097-05, OmniFilter RS-15, RS15, Pelican PBB-P10-5, Purwater PC05-BB-S, ShurFlo 15-054-02, Watts FM-BB-10-5, PWPL10BBM5, PWPL10FFM5, etc. Fits most 10 inch Big Blue Whole House systems like Culligan HD-950, Dupont HD1300, GE GXWH-30C, GXWH-35F, GXWH-40L
Conclusion
By our suggestions above, we hope that you can found pentek sediment r30b water filter cartridge for you.Please don’t forget to share your experience by comment in this post. Thank you!
