minmommy 
Nowadays, there are so many products of pentek epm 10×2.5 carbon block water filter in the market and you are wondering to choose a best one. You have searched for pentek epm 10×2.5 carbon block water filter in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings pentek epm 10×2.5 carbon block water filter which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
30,449 Reviews Scanned
Pentek EPM-20BB Carbon Block Filter Cartridge, 20" x 4-5/8", 10 Microns
- none
- Imported
- Reduces fine sediment and chlorine taste and odor in residential and commercial drinking water
- Nominal filtration rating of 10 microns
- Bonded PAC media with polyolefin pre-filter and polyethylene netting for extended life
- Initial pressure drop of 4 psi at a flow rate of 4 gpm
- Temperature range of 40 to 180 degrees F (4.4 to 82.2 degrees C)
This Pentek EPM-20BB carbon block filter cartridge reduces fine sediment and chlorine taste and odor in residential and commercial drinking water. It has a nominal (85%) filtration rating of 10 microns. The filter will reduce free available chlorine (FAC) at 2 parts per million (ppm) by at least 90% in up to 30,000 gallons at a flow rate of 4 gallons per minute (gpm). This cartridge is made of bonded powdered activated carbon (PAC) filter media wrapped in polyolefin with polyethylene outer netting. The nitrile butadiene rubber (Buna-N) gaskets seal the cartridge against the housing (sold separately). The cartridge has an initial pressure drop of 4 pounds per square inch (psi) at a flow rate of 4 gallons per minute (gpm), and operates over a temperature range of 40 to 180 degrees F (4.4 to 82.2 degrees C). This carbon block filter cartridge meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is used for purification of residential and commercial drinking water.
Specifications
| Nominal filtration rating | 10 microns |
| Initial pressure drop at 4 gpm | 4 psi |
| Chlorine reduction capacity | 30,000 gallons at 4 gpm |
| Temperature range | 40 to 180 degrees F (4.4 to 82.2 degrees C) |
| Maximum dimensions (H x W) | 20 x 4-5/8 inches (508 x 118 mm) |
| Materials certification | NSF/ANSI standard 42 |
The nominal filtration rating is for a particle removal efficiency of 85%. Chlorine reduction capacity is the minimum total amount of water for which the free available chlorine (FAC) at a concentration of 2 ppm is reduced by at least 90%.
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
Similar items with 4 stars and above
Pentek EPM-10 Carbon Block Filter Cartridge, 9-3/4" x 2-7/8", 10 Microns
- Reduces fine sediment and chlorine taste and odor in residential and commercial drinking water
- Nominal filtration rating of 10 microns
- Bonded PAC media with polyolefin pre-filter and polyethylene netting for extended life
- Initial pressure drop of 1.5 psi at a flow rate of 1 gpm
- Temperature range of 40 to 180 degrees F (4.4 to 82.2 degrees C)
This Pentek EPM-10 carbon block filter cartridge reduces fine sediment and chlorine taste and odor in residential and commercial drinking water. It has a nominal (85%) filtration rating of 10 microns. The filter will reduce free available chlorine (FAC) at 2 parts per million (ppm) by at least 90% in up to 3,000 gallons at a flow rate of 1 gallon per minute (gpm). This cartridge is made of bonded powdered activated carbon (PAC) filter media wrapped in polyolefin with polyethylene outer netting. The nitrile butadiene rubber (Buna-N) gaskets seal the cartridge against the housing (sold separately). The cartridge has an initial pressure drop of 1.5 pounds per square inch (psi) at a flow rate of 1 gallon per minute (gpm), and operates over a temperature range of 40 to 180 degrees F (4.4 to 82.2 degrees C). This carbon block filter cartridge meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is used for purification of residential and commercial drinking water.
Specifications
| Nominal filtration rating | 10 microns |
| Initial pressure drop at 1 gpm | 1.5 psi |
| Chlorine reduction capacity | 3,000 gallons at 1 gpm |
| Temperature range | 40 to 180 degrees F (4.4 to 82.2 degrees C) |
| Maximum dimensions (H x W) | 9-3/4 x 2-7/8 inches (248 x 73 mm) |
| Materials certification | NSF/ANSI standard 42 |
The nominal filtration rating is for a particle removal efficiency of 85%. Chlorine reduction capacity is the minimum total amount of water for which the free available chlorine (FAC) at a concentration of 2 ppm is reduced by at least 90%.
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
Similar items with 4 stars and above
Pentek EPM-BB Carbon Block Filter Cartridge, 9-3/4" x 4-5/8", 10 Microns
- Reduces fine sediment and chlorine taste and odor in residential and commercial drinking water
- Nominal filtration rating of 10 microns
- Bonded PAC media with polyolefin pre-filter and polyethylene netting for extended life
- Initial pressure drop of 5 psi at a flow rate of 2 gpm
- Temperature range of 40 to 180 degrees F (4.4 to 82.2 degrees C)
This Pentek EPM-BB carbon block filter cartridge reduces fine sediment and chlorine taste and odor in residential and commercial drinking water. It has a nominal (85%) filtration rating of 10 microns. The filter will reduce free available chlorine (FAC) at 2 parts per million (ppm) by at least 90% in up to 15,000 gallons at a flow rate of 2 gallons per minute (gpm). This cartridge is made of bonded powdered activated carbon (PAC) filter media wrapped in polyolefin with polyethylene outer netting. The nitrile butadiene rubber (Buna-N) gaskets seal the cartridge against the housing (sold separately). The cartridge has an initial pressure drop of 5 pounds per square inch (psi) at a flow rate of 2 gallons per minute (gpm), and operates over a temperature range of 40 to 180 degrees F (4.4 to 82.2 degrees C). This carbon block filter cartridge meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is used for purification of residential and commercial drinking water.
Specifications
| Nominal filtration rating | 10 microns |
| Initial pressure drop at 2 gpm | 5 psi |
| Chlorine reduction capacity | 15,000 gallons at 2 gpm |
| Temperature range | 40 to 180 degrees F (4.4 to 82.2 degrees C) |
| Maximum dimensions (H x W) | 9-3/4 x 4-5/8 inches (248 x 118 mm) |
| Materials certification | NSF/ANSI standard 42 |
The nominal filtration rating is for a particle removal efficiency of 85%. Chlorine reduction capacity is the minimum total amount of water for which the free available chlorine (FAC) at a concentration of 2 ppm is reduced by at least 90%.
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
Pentek EP-10 Carbon Block Filter Cartridge, 9-3/4" x 2-7/8", 5 Microns
- Reduces fine sediment and chlorine taste and odor in residential and commercial drinking water
- Nominal filtration rating of 5 microns
- Bonded PAC media with polyolefin pre-filter and polyethylene netting for extended life
- Initial pressure drop of 3.4 psi at a flow rate of 1 gpm
- Temperature range of 40 to 180 degrees F (4.4 to 82.2 degrees C)
This Pentek EP-10 carbon block filter cartridge reduces fine sediment and chlorine taste and odor in residential and commercial drinking water. It has a nominal (85%) filtration rating of 5 microns. The filter will reduce free available chlorine (FAC) at 2 parts per million (ppm) by at least 90% in up to 6,000 gallons at a flow rate of 1 gallon per minute (gpm). This cartridge is made of bonded powdered activated carbon (PAC) filter media wrapped in a polyolefin pre-filter with polyethylene outer netting. The nitrile butadiene rubber (Buna-N) gaskets seal the cartridge against the housing (sold separately). The cartridge has an initial pressure drop of 3.4 pounds per square inch (psi) at a flow rate of 1 gallon per minute (gpm), and operates over a temperature range of 40 to 180 degrees F (4.4 to 82.2 degrees C). This carbon block filter cartridge meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is used for purification of residential and commercial drinking water.
Specifications
| Nominal filtration rating | 5 microns |
| Initial pressure drop at 1 gpm | 3.4 psi |
| Chlorine reduction capacity | 6,000 gallons at 1 gpm |
| Temperature range | 40 to 180 degrees F (4.4 to 82.2 degrees C) |
| Maximum dimensions (H x W) | 9-3/4 x 2-7/8 inches (248 x 73 mm) |
| Materials certification | NSF/ANSI standard 42 |
The nominal filtration rating is for a particle removal efficiency of 85%. Chlorine reduction capacity is the minimum total amount of water for which the free available chlorine (FAC) at a concentration of 2 ppm is reduced by at least 90%.
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
Pentek EPM-20 Carbon Block Filter Cartridge, 20" x 2-7/8", 10 Microns
- Reduces fine sediment and chlorine taste and odor in residential and commercial drinking water
- Nominal filtration rating of 10 microns
- Bonded PAC media with polyolefin pre-filter and polyethylene netting for extended life
- Initial pressure drop of 1.0 psi at a flow rate of 2 gpm
- Temperature range of 40 to 180 degrees F (4.4 to 82.2 degrees C)
This Pentek EPM-20 carbon block filter cartridge reduces fine sediment and chlorine taste and odor in residential and commercial drinking water. It has a nominal (85%) filtration rating of 10 microns. The filter will reduce free available chlorine (FAC) at 2 parts per million (ppm) by at least 90% in up to 6,000 gallons at a flow rate of 2 gallons per minute (gpm). This cartridge is made of bonded powdered activated carbon (PAC) filter media wrapped in polyolefin with polyethylene outer netting. The nitrile butadiene rubber (Buna-N) gaskets seal the cartridge against the housing (sold separately). The cartridge has an initial pressure drop of 1.0 pounds per square inch (psi) at a flow rate of 2 gallons per minute (gpm), and operates over a temperature range of 40 to 180 degrees F (4.4 to 82.2 degrees C). This carbon block filter cartridge meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is used for purification of residential and commercial drinking water.
Specifications
| Nominal filtration rating | 10 microns |
| Initial pressure drop at 2 gpm | 1.0 psi |
| Chlorine reduction capacity | 6,000 gallons at 2 gpm |
| Temperature range | 40 to 180 degrees F (4.4 to 82.2 degrees C) |
| Maximum dimensions (H x W) | 20 x 2-7/8 inches (508 x 73 mm) |
| Materials certification | NSF/ANSI standard 42 |
The nominal filtration rating is for a particle removal efficiency of 85%. Chlorine reduction capacity is the minimum total amount of water for which the free available chlorine (FAC) at a concentration of 2 ppm is reduced by at least 75%.
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
Aquaboon Big Blue Coconut Shell Water Filter Cartridge | Activated Carbon Block CTO | Universal Whole House 5 Micron 20 inch Cartridge | Compatible with EPM-20BB, CB-BB-20, 155783-43, FC25B (2)
- ???? [COMPLETELY CLEAN WATER] Make your home contamination-free by removing chlorine and other harmful industrial chemicals – Now you can drink water knowing it is 100% safe.
- ???? [ULTRA-HIGH GRADE FILTRATION] Our pure water coconut carbon filter is extensively tested and verified to meet health and product standards. Have a piece of mind knowing your water is purified with the superior Aquaboon filtration system.
- ???? [UNIVERSAL 20-INCH REPLACEMENT] Elegantly designed at 4.5” x 20”, it will fit all standard 20 inch Big Blue Whole House filtration systems of 3M, GE, Culligan, ClearChoice, Dupont, Pentek, Omni, Hydronix, Trojan, Kenmore, Omnifilter, Pelican, Whirlpool, Watts, iSpring, Filtrete, etc. Your easy and smart coconut shell carbon filter.
- ???? [LONG LASTING] Your carbon block activated water filter comes in an airtight packaging, so you can trust it won’t go to waste, works better and lasts longer. Enjoy long-lasting coconut shell activated carbon water filters. Aquaboon – your smartest coconut shell water filter solution! Lifetime – 6 month (Replace once or twice times a year, depending on the water quality).
- ???? [Compatible Replacement Filters] ClearChoice 84642, 84641, Pelican CB-BB-20, Pentek 155783-43, EPM-20BB, CBC-20BB, Trojan CB-BB-20, iSpring FC25B, Hydronix CB-45-2005, CB-45-2010, Watts WCBCFF20, etc.
2 PACK OF 5 MICRON 20” BIG BLUE CARBON BLOCK CTO WATER FILTER REPLACEMENT CARTRIDGE BY AQUABOON
Provide your home with pure, healthy and clean water by using a filter. This 1 pack Aquaboon Water Big Blue Filter Whole House Activated Carbon Block eliminates all contamination from your water, so you can have clean water wherever you go. Whether it’s for cooking, drinking, showering or anything else, these filters provide you with a durable solution to your filtration needs.
These filters are capable of delivering up to a quarter gallon of water per second, while still being durable and reliable.
Features:
Class 1 Chlorine, Taste & Odor Reduction
Made with Premium Quality Coconut Shell Activated Carbon
5 Micron Filtration
No Release of Carbon Fines
Universal replacement – Fits all Standard 20″” Big Blue/Full Flow Filter Whole House systems of 3M, GE, Culligan, ClearChoice, Dupont, Pentek, Omni, Hydronix, Trojan, Kenmore, Omnifilter, Pelican, Whirlpool, Watts, iSpring, Filtrete, etc.
Dimensions: 20” x 4.5”
20,000 Gallon Capacity
Flow rate: 3 to 6 GPM
Max. Operating Pressure: 90 psi
Operating Temperature: 39°F~125°F (4°C~52°C)
Cartridges are individually shrink wrapped.
Lifetime: Replace once or twice times a year, depending on the water quality
Manufactured by Aquaboon
Compatible Replacement Filters:
ClearChoice 84642, 84641, Pelican CB-BB-20, Pentek 155783-43, EPM-20BB, CBC-20BB, Trojan CB-BB-20, iSpring FC25B, Hydronix CB-45-2005, CB-45-2010, Watts WCBCFF20, etc.
Similar items with 4 stars and above
Aquaboon Big Blue Coconut Shell Water Filter Cartridge | Activated Carbon Block CTO | Universal Whole House 5 Micron 10 inch Cartridge | Compatible with WFHDC8001, CB-BB-10, EPM, EP-BB, 12 Pack
- ???? [COMPLETELY CLEAN WATER] Make your home contamination-free by removing chlorine and other harmful industrial chemicals – Now you can drink water knowing it is 100% safe.
- ???? [ULTRA-HIGH GRADE FILTRATION] Our pure water coconut carbon filter is extensively tested and verified to meet health and product standards. Have a piece of mind knowing your water is purified with the superior Aquaboon filtration system.
- ???? [UNIVERSAL 10-INCH REPLACEMENT] Elegantly designed at 4.5” x 10”, it will fit all standard 10 inch Big Blue Whole House filtration systems of 3M, GE, Culligan, ClearChoice, Dupont, Pentek, Omni, Kenmore, Omnifilter, Whirlpool, Watts, Filtrete, etc. Your easy and smart coconut shell carbon filter.
- ???? [LONG LASTING] Your carbon block activated water filter comes in an airtight packaging, so you can trust it won’t go to waste, works better and lasts longer. Enjoy long-lasting coconut shell activated carbon water filters. Aquaboon – your smartest coconut shell water filter solution! Lifetime – 6 month (Replace once or twice times a year, depending on the water quality).
- ???? [Compatible Replacement Filters] ClearChoice 84629, DuPont WFHDC8001, KX Technologies 32-425-125-975, MATRIKX-CTO2-HD10, Liquatec CB-450-975-05, Pelican CB-BB-10, Pentek 155548-43, EP-BB, EP, EPM, CBC, CCBC & CEP Series, Trojan CB-BB-10, Watts MAXETW-FF975, WCBFF975, etc.
12 PACK OF 5 MICRON 10” BIG BLUE CARBON BLOCK CTO WATER FILTER REPLACEMENT CARTRIDGE BY AQUABOON
Provide your home with pure, healthy and clean water by using a filter. This 1 pack Aquaboon Water Big Blue Filter Whole House Activated Carbon Block eliminates all contamination from your water, so you can have clean water wherever you go. Whether it’s for cooking, drinking, showering or anything else, these filters provide you with a durable solution to your filtration needs.
These filters are capable of delivering up to a quarter gallon of water per second, while still being durable and reliable.
Features:
Class 1 Chlorine, Taste & Odor Reduction
Made with Premium Quality Coconut Shell Activated Carbon
5 Micron Filtration
No Release of Carbon Fines
Universal replacement – Fits all Standard 10″” Big Blue/Full Flow Filter Whole House systems of 3M, GE, Culligan, ClearChoice, Dupont, Pentek, Omni, Kenmore, Omnifilter, Whirlpool, Watts, Filtrete, etc.
Dimensions: 10” x 4.5”
10,000 Gallon Capacity
Flow rate: 3 GPM
Max. Operating Pressure: 90 psi
Operating Temperature: 39°F~125°F (4°C~52°C)
Cartridges are individually shrink wrapped.
Lifetime: Replace once or twice times a year, depending on the water quality
Manufactured by Aquaboon
Compatible Replacement Filters:
ClearChoice 84629, DuPont WFHDC8001, KX Technologies 32-425-125-975, MATRIKX-CTO2-HD10, Liquatec CB-450-975-05, Pelican CB-BB-10, Pentek 155548-43, EP-BB, EP, EPM, CBC, CCBC & CEP Series, Trojan CB-BB-10, Watts MAXETW-FF975, WCBFF975, etc.
Brita Extra Large 18 Cup UltraMax Water Dispenser and Filter – BPA Free – Black
- SPACE EFFICIENT: The BPA-Free UltraMax Water Dispenser tank holds 18 cups or 1.13 gallons of water which is great for families. Fits neatly on countertops and refrigerator shelves. Height 10.47″
- Width 5.67″
- Length/Depth 14.37″
- Weight 3 pounds
- CLEANER AND GREAT TASTING: The Brita standard filter reduces chlorine (taste and odor), copper, mercury, zinc and cadmium impurities found in tap water for cleaner great tasting water. *Substances reduced may not be in all users’ water
- FILTER CHANGE REMINDER: A helpful sticker indicator on the water dispenser lets you keep track of when you last changed your water filter and when it needs to be replaced. Replace Brita filters every 40 gallons or every 2 months
- INSTANT POUR: This large, 18 cup filtered water dispenser has a spigot that makes pouring easy. With the flip top lid, refilling is a breeze
- REDUCE WASTE & SAVE: One Brita water filter can replace 300 standard 16.9 ounce water bottles which saves you money and reduces plastic waste
Drink healthier, great-tasting water with this BPA free Brita 18 Cup UltraMax Water Dispenser. The extra large capacity makes this water filtration system perfect for busy families, sports teams and offices, while a new, sleek, space efficient design allows for convenient storage. A flip top lid makes refilling a breeze. Plus, just a glance at the filter indicator lets you know when it is time to change the Brita water filter. This filtered water dispenser comes with 1 water filter and delivers great tasting water in every pour.
Brita Large 10 Cup Everyday Water Pitcher with Filter – BPA Free – White
- LARGE WATER PITCHER: This large, clear plastic pitcher is easy to pour and refill. Great for families. Height 10.47″
- Width 5.59″
- Length/Depth 10.94″
- Weight 2.29 pounds
- CLEANER AND GREAT TASTING: The BPA free Brita filter reduces chlorine taste and odor, copper, mercury, and cadmium impurities found in tap water. *Substances reduced may not be in all users’ water.
- FILTER INDICATOR: For optimum performance, a helpful status indicator notifies you when your water filter needs to be replaced.
- REDUCE WASTE: One Brita water filter can replace 300 standard 16.9 ounce water bottles.
- REPLACEMENTS: Change Brita filters every 40 gallons, about 2 months for the average household for optimal performance.
Drink healthier, great tasting tap water with this BPA free Brita 10 cup water pitcher. With the Advanced filter technology, Brita cuts the taste and odor of chlorine to deliver great tasting water, and is certified to reduce copper, cadmium and mercury impurities, which can adversely affect your health over time. The Brita water pitcher’s flip top lid makes refilling a breeze and just a glance at the sticker filter indicator lets you know when it is time to change the Brita replacement filter. This large water pitcher comes with 1 water filter, which should be changed every 40 gallons or about 2 months for best results. Start drinking healthier, great tasting water with Brita today.
Conclusion
By our suggestions above, we hope that you can found pentek epm 10×2.5 carbon block water filter for you.Please don’t forget to share your experience by comment in this post. Thank you!
