minmommy 
Nowadays, there are so many products of pentek dgd water filter 100 micron in the market and you are wondering to choose a best one. You have searched for pentek dgd water filter 100 micron in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings pentek dgd water filter 100 micron which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
33,539 Reviews Scanned
Pentek DGD-5005 Spun Polypropylene Filter Cartridge, 10" x 4-1/2"
- Reduces sand, silt, scale, and rust particles in residential, commercial, and municipal drinking water
- Combines two separate gradient layers for higher efficiency and dirt-loading capacity
- Spun polypropylene for resistance to chemicals and bacteria
- Initial pressure drop of less than 1 psi at a flow rate of 10 gpm
- Temperature range of 40 to 145 degrees F (4.4 to 62.8 degrees C).
This Pentek DGD-5005 spun polypropylene filter cartridge reduces sand, silt, scale, and rust particles in residential, commercial, and municipal drinking water. It has two separate gradient layers for higher particle reduction efficiency and dirt-loading capacity than standard spun or string-wound cartridges. The nominal filtration rating of the pre-filter layer is 50 microns, and the rating of the post-filter layer is 5 microns. The filter is made of spun polypropylene fibers for resistance to chemicals and bacteria. It has an initial pressure drop of less than 1 pound per square inch (psi) at a flow rate of 10 gallons per minute (gpm), and operates over a temperature range of 40 to 145 degrees F (4.4 to 62.8 degrees C). This spun polypropylene filter cartridge meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is used for treatment of residential, commercial, and municipal drinking water.
Specifications
| Nominal filtration rating (pre-filter) | 50 microns |
| Nominal filtration rating (post-filter) | 5 microns |
| Initial pressure drop at 10 gpm | <1> |
| Temperature range | 40 to 145 degrees F (4.4 to 62.8 degrees C) |
| Maximum dimensions (H x W) | 10 x 4-1/2 inches (254 x 114 mm) |
| Materials certification | NSF/ANSI standard 42 |
The nominal filtration rating is for a particle removal efficiency of 85%.
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
Pentek 160168 BBFS-222 1" #20 Big Blue Three-Housing Filter System
Pentek 151122 OR-100 Buna-N O-ring for Big Blue Housings
Pentek ChlorPlus 10 Carbon Block Filter Cartridge, 10" x 2-1/2", 1 Micron
- Reduces chlorine and chloramines in residential and commercial drinking water
- Nominal filtration rating of 1 micron
- Bonded PAC media with a polyolefin core and shell
- Initial pressure drop of 6 psi at a flow rate of 1 gpm
- Temperature range of 40 to 125 degrees F (4.4 to 51.7 degrees C)
This Pentek ChlorPlus 10 carbon block filter cartridge reduces chlorine and chloramine in residential and commercial drinking water. It has nominal filtration rating of 1 micron at an efficiency of 85%. The cartridge is made of bonded powdered activated carbon (PAC) media with a polyolefin core and shell and polyethylene outer netting. A Santoprene gasket provides a watertight seal. The filter will reduce free available chlorine (FAC) at 2 parts per million (ppm) by at least 75% in up to 50,000 gallons at a flow rate of 1 gallon per minute (gpm), and reduce 3 ppm chloramines by at least 75% in up to 1,000 gallons at a flow rate of 1 gpm. The filter has an initial pressure drop of 6 pounds per square inch (psi) at a recommended flow rate of 1 gpm, and operates over a temperature range of 40 to 125 degrees F (4.4 to 51.7 degrees C). This carbon block filter cartridge is used for treatment of residential and commercial drinking water.
Specifications
| Nominal filtration rating | 1 micron |
| Initial pressure drop at 1 gpm | 6 psi |
| Chlorine reduction capacity | 50,000 gallons at 1 gpm |
| Chloramine reduction capacity | 1,000 gallons at 1 gpm |
| Operating temperature range | 40 to 125 degrees F (4.4 to 51.7 degrees C) |
| Maximum dimensions (H x W) | 9-3/4 x 2-7/8 inches (248 x 73 mm) |
The nominal filtration rating is for a particle removal efficiency of 85%. Chlorine reduction capacity is the minimum total amount of water for which the free available chlorine (FAC) at a concentration of 2 ppm is reduced by at least 75%. Chloramine reduction capacity is the minimum total amount of water for which chloramines at a concentration of 3 ppm are reduced by 75%.
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
2 x Pentek 155359-43, DGD-2501 Big Blue 10" x 4-1/2" 25/1 Micron Sediment Melt Blown Filters Cartridges Dual Gradient Polypropylene
This is listing is for two filters. DGD Series cartridges are manufactured from 100% pure polypropylene and are sized for use in our Big Blue® filter housings. DGD Series cartridges are designed for purity and will not impart taste, odor or color to the liquid being filtered. Additionally, the polypropylene construction provides superior chemical resistance and is not prone to bacterial attack. The DGD Series’ advanced design combines selective final filtration with appropriate pre-filtration to achieve up to three times the dirt-holding capacity of similar size sediment cartridges and even greater capacity than standard spun or string-wound cartridges. This performance enhancement is achieved by combining two separate gradient layers in one filter. The larger diameter of the pre-filter reduces the particle load to the post filter, allowing it to operate at higher velocities. The effective filter depth is increased to a full 233% of standard spun-polypropylene or string-wound filters. This increased depth provides for very high particulate reduction efficiencies and added loading capacity. The unique design and performance characteristics of the DGD Series cartridges make them an excellent choice for all residential, rural, municipal and commercial applications.
(Package Of 2) Pentek DGD-7525-20 Sediment Water Filters (20" x 4.5")
Pentek DGD-7525-20 Water Filter Replacement Information: The Pentek DGD-7525-20 filters are easy to install in whole house systems or commercial water filter systems. Replace the Pentek DGD-7525-20 sediment water filter cartridge every 2 months or 8,000 gallons of water. The filter change interval also depends on your water supply and water usage. Pentek DGD-7525-20 Water Filter Housings: For use in Ametek, US Filter, Culligan 20″ Big Blue housings The following Culligan, Ametek, USFilter, and Plymouth Products model holds the DGD-7525-20 sediment water filter cartridge: #20 Big Blue. The Pentek DGD-7525-20 Sediment Water Filter Cartridge also fits Cuno AquaPure, Omni, Sears, Fulflo, Teledyne Water Pik, Ace, Master Plumber, Flotec, Honeywell, General Electric, American Plumber, and most other water filter housings for 20" x 4.5" filters. . .Pentek DGD-7525-20 Water Filter Specs: Type:Dual Gradient Density Dimensions:20″ x 4 1/2″ (254 mm x 114 mm) Pre-Filter Micron Rating (Nominal):75 Post-Filter Micron Rating (Nominal):25 Temperature:40?F to 145?F (4.4?C to 62.8?C) Initial ΔP (psi) @ Flow Rate (gpm):DGD Series Dual Layer Filters Comparison ChartWATER FILTER MODELS MICRON RATING (Nominal)10″ x 4.5″ 20″ x 4.5″ Pre-Filter Post-FilterDGD-2501 DGD-2501-20 25 Fine 1 Extra-FineDGD-5005 DGD-5005-20 50 Medium 5 Medium-FineDGD-7525 DGD-7525-2075 Coarse 25 Fine (Package Of 2)
Pentek GD-2501-20BB 20" Big Blue Filter Cartridge – 4 Pack
- 4 Pack of Pentek Model DGD-2501-20 (Part #155360-43)
- Dual-Grade Sediment Filtration – 25 Micron Outer Filtration graded to 1 Micron Filtration in the Inner Core
- 20″ Big Blue (#20BB) Size fits any 20″ Big Blue Housing. (Actual Cartridge Dimensions: 4.5″ Dia. x 20″L. Approximate Housing Outside Dimensions 7.5″ Dia. x 23″L)
- Tested and Certified by NSF International to NSF/ANSI Standard 42 for material requirements only.
- <1 psi Pressure Drop @ 20 gpm Flow Rate
DGD Series Cartridges are manufactured from 100% pure polypropylene and are sized for use in Pentair Pentek Big Blue Filter Housings.
DGD Series Cartridges are designed for purity and will not impart taste, odor or color to the liquid being filtered. Additionally, the polypropylene construction provides superior chemical resistance and is not prone to bacterial attack.
The DGD Series’ advanced design combines selective final filtration with appropriate pre-filtration to achieve up to three times the dirt holding capacity of similar size sediment cartridges and even greater capacity than standard spun or string-wound cartridges. The larger diameter of the filter reduces the particle load, allowing it to operate at higher velocities. The effective filter depth is increased to a full 233%. This increased depth provides very high particulate reduction efficiencies and added loading capacity.
The design and performance characteristics of the DGD Series Cartridges make them an excellent choice for all residential, rural, municipal and commercial applications.
(Package Of 2) Pentek DGD-2501 Sediment Water Filters (10" x 4.5")
Pentek DGD-2501 Water Filter Replacement Information: The Pentek DGD-2501 filter is easy to install in whole house systems and commercial water filter systems. Replace the Pentek DGD-2501 sediment water filter cartridge every 2 months or 8,000 gallons of water. The filter change interval also depends on your water supply and water usage. Pentek DGD-2501 Water Filter Housings: For use in Ametek, US Filter, Culligan, and Pentek 10″ Big Blue housings The following Culligan model holds the DGD-2501 sediment water filter cartridge: HD-950 The following Ametek, USFilter, and Plymouth Products model holds the DGD-2501 sediment water filter cartridge: #10 Big Blue The Pentek DGD-2501 Sediment Water Filter Cartridge also fits Cuno AquaPure, Omni, Sears, Fulflo, Teledyne Water Pik, Ace, Master Plumber, Flotec, Honeywell, General Electric, American Plumber, and most other water filter housings for 10" x 4.5" filters . .Pentek DGD-2501 Water Filter Specs: Type:Dual Gradient Density Dimensions:10″ x 4 1/2″ (254 mm x 114 mm) Pre-Filter Micron Rating (Nominal):25 Post-Filter Micron Rating (Nominal):1 Temperature:40?F to 145?F (4.4?C to 62.8?C) Initial ΔP (psi) @ Flow Rate (gpm):DGD Series Dual Layer Filters Comparison ChartWATER FILTER MODELS MICRON RATING (Nominal)10″ x 4.5″ 20″ x 4.5″ Pre-Filter Post-FilterDGD-2501 DGD-2501-20 25 Fine 1 Extra-FineDGD-5005 DGD-5005-20 50 Medium 5 Medium-FineDGD-7525 DGD-7525-2075 Coarse 25 Fine (Package Of 2)
(Package Of 5) Pentek DGD-2501 Sediment Water Filters (10" x 4.5")
Pentek DGD-2501 Water Filter Replacement Information: The Pentek DGD-2501 filter is easy to install in whole house systems and commercial water filter systems. Replace the Pentek DGD-2501 sediment water filter cartridge every 2 months or 8,000 gallons of water. The filter change interval also depends on your water supply and water usage. Pentek DGD-2501 Water Filter Housings: For use in Ametek, US Filter, Culligan, and Pentek 10″ Big Blue housings The following Culligan model holds the DGD-2501 sediment water filter cartridge: HD-950 The following Ametek, USFilter, and Plymouth Products model holds the DGD-2501 sediment water filter cartridge: #10 Big Blue The Pentek DGD-2501 Sediment Water Filter Cartridge also fits Cuno AquaPure, Omni, Sears, Fulflo, Teledyne Water Pik, Ace, Master Plumber, Flotec, Honeywell, General Electric, American Plumber, and most other water filter housings for 10" x 4.5" filters . .Pentek DGD-2501 Water Filter Specs: Type:Dual Gradient Density Dimensions:10″ x 4 1/2″ (254 mm x 114 mm) Pre-Filter Micron Rating (Nominal):25 Post-Filter Micron Rating (Nominal):1 Temperature:40?F to 145?F (4.4?C to 62.8?C) Initial ΔP (psi) @ Flow Rate (gpm):DGD Series Dual Layer Filters Comparison ChartWATER FILTER MODELS MICRON RATING (Nominal)10″ x 4.5″ 20″ x 4.5″ Pre-Filter Post-FilterDGD-2501 DGD-2501-20 25 Fine 1 Extra-FineDGD-5005 DGD-5005-20 50 Medium 5 Medium-FineDGD-7525 DGD-7525-2075 Coarse 25 Fine (Package Of 5)
(Package Of 6) Pentek DGD-2501 Sediment Water Filters (10" x 4.5")
Pentek DGD-2501 Water Filter Replacement Information: The Pentek DGD-2501 filter is easy to install in whole house systems and commercial water filter systems. Replace the Pentek DGD-2501 sediment water filter cartridge every 2 months or 8,000 gallons of water. The filter change interval also depends on your water supply and water usage. Pentek DGD-2501 Water Filter Housings: For use in Ametek, US Filter, Culligan, and Pentek 10″ Big Blue housings The following Culligan model holds the DGD-2501 sediment water filter cartridge: HD-950 The following Ametek, USFilter, and Plymouth Products model holds the DGD-2501 sediment water filter cartridge: #10 Big Blue The Pentek DGD-2501 Sediment Water Filter Cartridge also fits Cuno AquaPure, Omni, Sears, Fulflo, Teledyne Water Pik, Ace, Master Plumber, Flotec, Honeywell, General Electric, American Plumber, and most other water filter housings for 10" x 4.5" filters . .Pentek DGD-2501 Water Filter Specs: Type:Dual Gradient Density Dimensions:10″ x 4 1/2″ (254 mm x 114 mm) Pre-Filter Micron Rating (Nominal):25 Post-Filter Micron Rating (Nominal):1 Temperature:40?F to 145?F (4.4?C to 62.8?C) Initial ΔP (psi) @ Flow Rate (gpm):DGD Series Dual Layer Filters Comparison ChartWATER FILTER MODELS MICRON RATING (Nominal)10″ x 4.5″ 20″ x 4.5″ Pre-Filter Post-FilterDGD-2501 DGD-2501-20 25 Fine 1 Extra-FineDGD-5005 DGD-5005-20 50 Medium 5 Medium-FineDGD-7525 DGD-7525-2075 Coarse 25 Fine (Package Of 6)
Conclusion
By our suggestions above, we hope that you can found pentek dgd water filter 100 micron for you.Please don’t forget to share your experience by comment in this post. Thank you!
