Which Is The Best Oil Fired Hot Water Tank

179,000 MAX MBH “SHORTY” PAC 4-SECTION CAST IRON OIL-FIRED HOT WATER BOILER LESS BURNER/W TANK-LESS COIL, EFFICIENCY:84%, FLUE SIZE:7″, MAX OPERATING PRESSURE:50 PSI, MAX WATER TEMPERATURE:250 DEGREES F, MAX BURNER CAPACITY:1.50 GPH, TANK-LESS HEATER:4.00 GPM, MINIMUM RELIEF VALVE CAPACITY:179 LB/HR, MAX INPUT MBH:179,000, AHRI NET WATER RATING :156,000, DIMS:33-1/2″H X 24-3/4″W X 22-1/2″D, WEIGHT:640 LBS, IN MFG BOX, **(BURNER NOT INCLUDED)**

The Easy Kleen 4000 psi Commercial Gasoline Driven Oil Fired Hot Water Pressure Washer is one of our most popular and versatile units. Utilized by a multitude of business for a wide variety of cleaning needs. From a simple oil field application to daily construction and farm use. Our customers continuously comment on the heat and speed of cleaning with these machines. 15 HP gasoline driven engine, efficient, serviceable Commercial duty triplex plunger pump, oil bath crank case, stainless valves, brass manifold, direct drive, thermo pump protector, steel housing Schedule 80 pipe, elliptically wound and stretched, no seam welds, structurally braced to reduce vibration and pipe wear, sealed with a ceramic blanket, stainless steel housing 110/120V Oil fired burners, adjustable thermostat, on/off switch, dependable, serviceable All welded powder coated frame, 12-Gauge bent steel roll cage, lifting bar, 3/4 in. threaded axles welded to the frame, 13 in. pneumatic wheels attached with lock Includes 36 in. gun and wand assembly with quick coupler system, 5 nozzles, downstream chemical injection system, 50 ft. of high pressure hose 4000 psi at 3.5 GPM CSA/ETL listed

210,000 BTU “SOLAIA” SERIES CAST IRON OIL-FIRED HOT WATER BOILER/LESS BURNER, VOLTS:120, HERTZ:60, PHASE:1, EFFICIENCY:86.4%, INPUT BTU:210,000, DOE HEATING OUTPUT CAPACITY:183,000, I=B=R NET RATING OUTPUT:159,000, FIRING RATE:1.50 GPH, NOZZLE SUPPLIED:NOT INCLUDED, WATER VOLUME:5.8 GALLONS, TANKLESS RATING:NOT INCLUDED, FLUE SIZE:6″, MAX OPERATING PRESSURE:58 PSI, MAX WATER TEMPERATURE:245°F, DIMS:28-7/8″H X 17-3/4″W X 29-3/4″D, WEIGHT:400 LBS, IN MFG CRATE, MADE IN USA.

Please Note:

1、When install the water heater please do not over tighten the connectors and pipes to prevent it from bursting and leaking.

2、The exhaust and top will get hot, please check around area for flammables, especially gasoline or other vapors which may ignite. Please make sure there are no foreign objects around the portable tankless water heater or have fallen into the top.

3、A gas leak detection is needed before use and please do not use flame for leak detection. Soapy solution, gas detectors, etc. are recommended to detect leaks.

4、Please use only liquid propane as fuel and use it in a well-ventilated place.

5、Please make sure there is enough water pressure. If the water pressure is below 2.5 PSI, the water heater cannot be ignited.

6、If the outside temperature is around or below freezing(0℃/32℉), please ensure to drain out the water after each use to avoid internal damage to the heat exchanger.

7、This water heater is not suitable for high altitude areas over 3300 feet and strong wind conditions.

The Stiebel Eltron Tempra 20 Trend Tankless Water Heater will typically use 15-20% less energy compared to conventional electric tank water heaters. Although, it’s possible to save significantly more energy depending on personal home usage habits. The difference is that conventional tank water heaters continually store hot water, and as a result, lose 15%-20% of the total energy consumed to the environment around them. This is called standby heat loss. Tank water heaters that use gas or oil are even less efficient, because they also lose heat through their vents to the outdoors. Our tankless water heaters do not need venting, and will not store hot water, waiting for you to use it. They operate on-demand to provide continuous and endless hot water when you need it, and not waste energy when you don’t. CERTIFICATIONS INCLUDE – ANSI/UL Std. 499, CSA Std. C22.2 No. 88, ISO 9001, WQA tested & certified against NSF/ANSI 372 for lead free compliance. TECHNICAL SPECIFICATIONS – Single Phase 50/60 Hz; Voltage: 240 V/208 V; Wattage: 19.2 KW/14.4 KW; Min recommended household electric service 125 A; Amperage draw: 2 x 40 A 2 x 35 A; Number and min. recommended size of circuit breakers: 2 x 40 A (DP); Number of runs and min. recommended wire size (copper): 2 x 8/2 AWG; Max. temperature rises: 88 F/66 F at 1.50 GPM, 58 F/44 F at 2.25 GPM, 44 F/33 F at 3.00 GPM, 29 F/ 22 F at 4.50 GPM; Min. water flow to activate unit: 0.50 GPM/1.9l /min; Weight: 16.1 lb/7.3 kg; Nominal water volume: 0.26 gal/1l; Max. inlet water temperature: 131 F/55 C; Working pressure: 150 PSI/10 BAR; Tested to pressure: 300 PSI / 20 BAR; Water connections: 3/4″ NPT.

Product Description

Durable, easily replaceable heating elements copper heat exchanger with brass top digital temperature display control knob to adjust temperature in increments of 1 degree recommended wire size: 3 x 8 awg 240 Volts.

From the Manufacturer

Eemax Electric tankless water heaters offer 99 percent thermal energy efficiencies that pays for itself. Eemax’s tankless water heaters minimize stand-by heat loss – don’t pay for keeping water hot in a large storage tank 24/7 Saving energy also means you are reducing your carbon footprint. Enjoy up to 90 percent space saving compared to large tank water heaters. This means you can put your Eemax heater anywhere. You get hot water faster and save water when the Eemax Tankless hot water heater is installed close to the point of use. No more wasting water down the drain. With Eemax Electric Tankless Water Heaters dangerous temperature levels and spikes are no longer a problem. Scald prevention – Eemax sophisticated computer controlled micro-processing temperature control models provide unlimited hot water at precise outlet setting (+ or – one degree accuracy). Electric Tankless run on safe electricity, no venting required or carbon monoxide danger. You can expect decades of trouble free performance from your Eemax Electric Tankless and can last nearly twice as long as a tank heater.

196,000 MAX BTU’S “ULTRA-OIL” CAST IRON OIL-FIRED HOT WATER BOILER/LESS BURNER, VOLTS:120, HERTZ:60, PHASE:SINGLE, EFFICIENCY:86.5%, FLUE SIZE:6″, MAX OPERATING PRESSURE:50 PSI, MAX WATER TEMPERATURE:250 DEGREES F, MAX BURNER CAPACITY:1.40 GPH, MINIMUM RELIEF VALVE CAPACITY:150 LB/HR, D.O.E HEATING CAPACITY:172,000, NET WATER RATING:150,000, BOILER WATER CONTENT:21.5 GALLONS, DIMS:38-1/2″H X 22″W X 32″D, WEIGHT:852 LBS, IN MFG BOX, MADE IN USA (PRODUCT INCLUDES:007-HF5 TACO PUMP, AND BAROMETRIC DAMPER).**(BURNER NOT INCLUDED)**Being sold as new and unused with no warranty or guarantee.

GMB OE Replacement Water Pumps are precision-built and balanced, made out of either aluminum or cast-iron, that meet or exceed original equipment specifications. GMB is one of the world’s largest designers and producers of automotive products for most European, Asian and domestic built vehicles. GMB products are engineered and built utilizing the strictest design and manufacturing guidelines, with the finest quality assured through ISO 9002 programs.

Conclusion

By our suggestions above, we hope that you can found oil fired hot water tank for you.Please don’t forget to share your experience by comment in this post. Thank you!