minmommy 
Nowadays, there are so many products of maytag refrigerator circuit board in the market and you are wondering to choose a best one. You have searched for maytag refrigerator circuit board in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings maytag refrigerator circuit board which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Whirlpool W10310240 CONTROL BOARD, HV
This is a genuine replacement part. The model number and name for the following item is: Whirlpool Part Number W10310240: BOARD, HV CONTROL
Whirlpool Part Number W10310240: BOARD, HV CONTROL
ELECTRIC BOARD WHIRLPOOL WPW10310240 / W101310240 / W10213583
Maytag Refrigerator Control Board 12868513
- THIS 12868513 ELECTRONIC CONTROL BOARD WORKS WITH SELECT WHIRLPOOL MODELS. REPLACES W10165748
- Works with the following models: Maytag ABB1922FED1, Maytag ABB1927VEB1, Maytag ABB1927VEB2
- Maytag ABB1927VEW1, Maytag ABB1927VEW2, Maytag ABB192ZDEB5, Maytag ABB192ZDEB6
THIS 12868513 ELECTRONIC CONTROL BOARD WORKS WITH SELECT WHIRLPOOL MODELS.
Whirlpool Board-Hv Control Iceland OEM W10310240
Whirlpool W11088499 Main Control Board
Kenmore Board-Hv Control Iceland OEM W10310240
Brand New OEM! Whirlpool Part, The Kenmore Brand is a Sears Brand which uses Whirlpool Parts! 90 Day Warranty! Geniune Replacement Part
4389102 Refrigerator Ice Maker Sensor Control Board Kit for Whirlpool Kenmore Kitchen Aid Maytag Jenn Air Replace # W10757851 AP5956767 W10193666 ADC9102 2198586 PS557945 AP3137510
- ✅【Ideal Replacement】: Want a new Ice Maker Emitter Sensor Control Board that matches the original, for far less than going back to the dealership? This refrigerator control board was specifically designed to look and function the same as the original Emitter Sensor Control Board on your Whirlpool Ice Maker. While this is NOT a genuine Whirlpool part, it is a direct replacement and it will appear, fit and work like the factory part.
- ✅【REPLACEMENT ICE MAKER OPTIC BOARD】 – The ice maker is controlled by this ‘Optics Board Kit’ that scans the level of ice in the ice container. When the ice level in the container blocks the led beam (Full of Ice) it (shuts off the ice maker). When the ice level in the container is below the led beam (Low Ice) it (turns on the ice maker). If the ice level control board fails, the ice maker will stop making ice.
- ✅【Compatible】: Refrigerator ice maker ice level optics control board kit. Includes emitter and receiver control boards.Designed to fit specific Whirlpool manufactured refrigerator models including Jenn Air Kenmore Kitchen Aid Maytag. You can send us refrigerator models number, we can help you to confirm if it can work or not.
- ✅【Replaces Part Numbers】: ADC9102 AP3137510 PS557945 PS10064583 2220398 2220402 W10193666 W10193840 2198585 2198586 2198588 2255114 W10290817 4388635 4389102 4389102R W10757851 AP595676 PS10064583 TJ4389102R.
- ✅【Buy with Confidence】: Order from KONDUONE, we offer LIFETIME WARRANTY, true worry-free shopping experience. If the Icemaker ever fails on your Whirlpool Refrigerator simply contact us for a replacement and save dealer prices.
Super Exquisite and Durable Icemaker Control Board Kit
How To Test The Whirlpool Ice Maker Optic Control Boards 4389102
Diagnostics 1 : First, open the freezer door and look at the status LED on the right hand side. Make sure the ice maker control is turned “ON”. The status LED should blink twice, pause, and then repeat (blink blink…. pause. blink blink… pause).
Diagnostics 2 : Next, with the freezer door open, hold down the flapper door on the left hand side to un-block the optics beam. With the optics beam unblocked, the status LED should light up and stay on (not blink). If the status LED continues to blink twice, then you have faulty optic control boards and they will need to be replaced.
Diagnostics 3 : If there is no status LED light, then the ice maker could be in “harvest” mode. Hold down the freezer light switch, the status LED should flash every second while in harvest mode. If the LED light still does not light up, then the optic control boards will need to be replaced.
How To Replace The Whirlpool Ice Maker Optic Control Boards 4389102
Step1: First, unplug the refrigerator.Remove the three Phillips screws on the right hand side.
Step2: Disconnect the wire harness on the back side and then remove the two Phillips screws to release the receiver control board from the housing. Re-install the receiver board in the reverse order.
Step3: Next, remove the three Phillips screws on the left hand side.
Step4: Disconnect the wire harness on the top side and then remove the two Phillips screws to release the emitter control board from the housing. Re-install the emitter board in the reverse order.
Specification:
Brand: KONDUONE
Condition: 100% Brand New and never used
Package Includes:
1 x 4389102 Icemaker Sensor Control Board Kit with Instruction Manual
Whirlpool W10312695 Refrigerator Electronic Control Board Genuine Original Equipment Manufacturer (OEM) Part
Whirlpool W10890094 Electronic Control Board
- This is a Genuine OEM Replacement Part.
- Brand name: Whirlpool
- Model number: W10890094
- Country of Origin: United States
- This Part Fits : Replaces Part Number 12920710
- Replaces Part Number W10178102
- Replaces Part Number WP12920710
- Replaces Part Number 12920708
- Replaces Part Number 67006747
- Replaces Part Number 67006430
- Replaces Part Number 67006389
2-Pack Replacement for MFI2269VEM3 Refrigerator Water Filter – Compatible with Maytag UKF8001 Fridge Water Filter Cartridge
- Compatible with Maytag MFI2269VEM3 Refrigerator Water Filter, Quantity: 2
- Replacement for UKF8001 Fridge Water Filter Cartridge
- Certified to NSF/ANSI Standard 42 by WQA. Refrigerator water filter retains beneficial nutrients in water while removing the taste of chlorine and odor leaving you with a fresh and clean tasting water.
- Reduces waterborne contaminants including cysts, asbestos, particulates, lead, mercury without removing beneficial minerals & restricting the flow rate of the water.
- Cut down water bottle waste and save money while also helping the environment by using water filters. For the highest quality water and best contaminant reduction replace the filter every 6 months. On Sale for a Limited Time!
Replacement for MFI2269VEM3 Refrigerator Water Filter – Compatible with Maytag UKF8001 Fridge Water Filter Cartridge
MICRON RATE: 0.5 Micron
OPERATING TEMP.: 1-38? / 34-100?
OPERATING PRESSURE: 30-120psi / 207-827kPa
FLOW RATE: 0.5 GPM = 1.9 LPM
FILTRATION LIFE: 6 months/300G
*Depends on water quality and level of contaminants.* Please note: This is an Denali Pure brand replacement part, not an OEM product. This product is not affiliated with any OEM brands and is not covered under any warranties offered by the original manufacturers. Any warranties for this product are offered solely by Denali Pure. All mentions of brand names or model descriptions are made strictly to illustrate compatibility. All brand names and logos are registered trademarks of their respective owners.
Conclusion
By our suggestions above, we hope that you can found maytag refrigerator circuit board for you.Please don’t forget to share your experience by comment in this post. Thank you!
