minmommy 
Nowadays, there are so many products of marathon 65 gal hot water heater in the market and you are wondering to choose a best one. You have searched for marathon 65 gal hot water heater in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings marathon 65 gal hot water heater which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
24,789 Reviews Scanned
Eastman 86279 Water Heater Stand
- DIMENSIONS: This sturdy metal construction water-heater stand is in size of 24″ D x 24″ W x 18″ H
- MATERIAL: Made of high-quality galvanized steel to sustain the weight of heavy duty water heaters and give long-lasting performance
- CONTENTS: Safety clips for screwing to wall or floor included
- LOAD: 1200 lb. Load rating or up to 100-gallon water heater
- AVAILABILITY: This water heater stand is also available in a smaller size, choose as per requirement
Product Description
Eastman 86279 Galvanized Steel Water Heater Stand features x-bracing for additional strength and safety clips for securing to the wall or floor. The high-quality galvanized steel construction has a safe loading rate of up to 1200 pounds or up to 100-gallon water heaters. Ideally used to meet safety requirements by raising water heater to an acceptable area for code compliance. This reduces the risk of fire and property damage caused by unstable water heaters. The included hardware makes the installation straightforward and simple, even for non-plumbers.
From the Manufacturer
Eastman’s new Water Heater Stand features x-bracing for additional strength, and safety clips for securing to the wall or floor. The water heater stand is rated for up to 1200 pounds. For use with up to 65 gallon water heaters.
Eastman 86728 Galvanized Steel Water Heater Stand for Floor and Wall Mount, 21" L x 21" W x 18" H, up to 650-pound load rating, or 30-60 Gallon Water Heaters
- DIMENSIONS: This sturdy metal construction water-heater stand is in size of 21″ L x 21″ W x 18″ H
- MATERIAL: Made of high-quality galvanized steel to sustain the weight of heavy duty water heaters and give long-lasting performance
- CONTENTS: Safety clips for screwing to wall or floor included
- LOAD: 650 lb. Load rating or up to 60-gallon water heater
- AVAILABILITY: This water heater stand is also available in a larger size, choose as per requirement
Product Description
Eastman 86278 Galvanized Steel Water Heater Stand features x-bracing for additional strength and safety clips for securing to the wall or floor. The high-quality galvanized steel construction has a safe loading rate of up to 650 pounds or up to 60-gallon water heaters. Ideally used to meet safety requirements by raising water heater to an acceptable area for code compliance. This reduces the risk of fire and property damage caused by unstable water heaters. The included hardware makes the installation straightforward and simple, even for non-plumbers.
From the Manufacturer
Eastman’s new Water Heater Stand features x-bracing for additional strength, and safety clips for securing to the wall or floor. The water heater stand is rated for up to 900 pounds. For use with up to 65 gallon water heaters.
40 gal. Residential Electric Water Heater, 4500W
Rheem SP10869MM Screw-In 240-volt by 4500-watt Element, Premium Resistored Stainless Steel
- Element – 240V/4500W stainless steel resistored lwd – 1 in screw-in
- Watt density classification: lwd, input Voltage (V): 208, Input voltage (V): 240, wattage at 208V (W): 3380
- Element diameter (in.): .316, Element length – Flange to tip (in.): 13.44, mounting Type: threaded, ACTUAL thread size – Outside diameter.): 1-9/32
- Thread type series designation: NPSM, configuration: fold back, nominal thread size – (in.): 1, threads per inch: 11-1/2
Product Description
Rheem SP10869MM water heater 1 inch 4500W element resistored screw-in LWD 240V stainless steel
From the Manufacturer
Rheem is a leading provider of gas furnaces, heat pumps, air conditioners, air handlers, indoor air quality products, gas and electric water heaters.
Rheem SP610160 Element – 4500W CO U F
Product Description
The Rheem SP610160 is an element – 240V/4500W copper non-resistored LWD – 1.5-inch screw-in. Watt Density Classification: LWD. Input Voltage (V): 240. Wattage at 240V (W): 4500. Watt Density at 240V (W/sq. in. ): 98. Cold Resistance (ohms): 12.8. Outer Sheath Material: Copper. Resistored: No. Configuration: Foldback. Element Diameter (in.): .316. Element Length – Flange to Tip (in.): 13.38. Mounting Type: Threaded. Actual Thread Size – Outside Diameter (in.): 1-1/2. Nominal Thread Size – (in.): 1-1/2. Threads per Inch: 12. Thread Type Series Designation: UNF. Hex Head Size – Across Flats (in.): 1-7/8.
From the Manufacturer
The Rheem SP610160 is an element – 240V/4500W copper non-resistored LWD – 1.5-inch screw-in. Watt Density Classification: LWD. Input Voltage (V): 240. Wattage at 240V (W): 4500. Watt Density at 240V (W/sq. in. ): 98. Cold Resistance (ohms): 12.8. Outer Sheath Material: Copper. Resistored: No. Configuration: Foldback. Element Diameter (in.): .316. Element Length – Flange to Tip (in.): 13.38. Mounting Type: Threaded. Actual Thread Size – Outside Diameter (in.): 1-1/2. Nominal Thread Size – (in.): 1-1/2. Threads per Inch: 12. Thread Type Series Designation: UNF. Hex Head Size – Across Flats (in.): 1-7/8.
Camco5" Residential Screw-In Water Heater Element Wrench – Fits All Standard Screw In Elements (09883)
- 5″ long Zinc plated water heater element wrench
- Compatible with all standard screw-in elements and 1-1/2″ hex on residential screw-in water heater elements
- Cross holes allow you to use a screwdriver for enhanced torque and to help remove and install element with ease
- Fits into offsets where an adjustable wrench can’t
- For use with residential water heaters
Camco 07043 LWD Apcom Style Plumber’s Pack Water Heater Repair Kit
- Contains one Apcom style lower thermostat with protector
- Contains one Apcom style upper thermostat with protector
- Contains two 240V/4500W low watt density, screw-in foldback style water heater elements
- Simplifies electric water heater diagnosis and repair
- UL Listed components
EcoSmart ECO 11 Electric Tankless Water Heater, 13KW at 240 Volts with Patented Self Modulating Technology
- Lifetime warranty
- Save up to 60-percent on your water heating cost with an ECOSMART electric tankless water heater
- Never run out of hot water with an ECOSMART tankless water heater
- Patented Self Modulating Technology and design
- ECOSMART tankless water heaters are 99.8-percent energy efficient.Uniform Energy Factor:0.98
Product Description
This Smart Technology electric tankless water heater is configured as a “whole home” model for climates where incoming water temperature is 67°F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67°F and an output setting of 105°F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. All tankless water heaters are sized based on flow rate and temperature rise, and there is a direct relationship between the two. So if used in a cold area requiring a high temperature rise, it will be more limited in the amount of fixtures (gallons per minute) it can heat at one time compared to a warmer climate. When sized properly this water heater will provide endless hot water and only consume the energy needed, giving the user complete control. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The ECO 11 requires a minimum 125 amp electrical panel for installation with (1) 60 amp double pole breaker connected to (1) set of #6 awg wire. Plumbing connections are 1/2″ compression fitting with the option of 1/2″ NPT adapter included. For additional assistance please feel free to contact our support center at 877-474-6473.
NOTE : 11Kw at 220 is equal to 13kw at 240.
From the Manufacturer
This Smart Technology electric tankless water heater is configured for climates where incoming water temperature is 67 Degree F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67 Degree F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.
Oscillating Space Heater, Indoor Personal Heater, Electric Ceramic Heater with Over Heat Protection, Tip Over Protection, 3 Heat Settings, Quick Heat up for Home Office
- Great Helper to Warm Your Corner: You can fit the heater in any place with its compact size of 4.9*4.9*8.1 inches. On the desktop in your office, besides your bed, under the table, anywhere you can imagine.
- Easy But Not Noisy: This space heater is super easy to use: switch on the main power button on the back, press the ON/OFF on the top, then choose your desired temp setting, you can enjoy the warm and toasty air quietly, the noise is under 45 dB, hardly notice.
- Take Care All Your Safety Concern: With overheat protection and tip-over protection, the ceramic heater will automatic power-off when overheating or tipped over. Your safety is our biggest concern.
- Simple yet Useful Settings: Equipped with PTC ceramics with a long service life, high thermal efficiency
- Quick Heating in 1 Second
- Wide Angle Auto-Oscillation. This PTC ceramic heater is designed for your max satisfaction.
- All Season Breeze: This Space heater is of a sleek design and considerate 3 temp settings: Natural Wind, Low Heat, High Heat to fulfill your all year round need only in one switch. Your cozy and comfortable winter is promising. It’s also a great choice for friends and family.
Important notes:
1. Avoid using in the place with high humidity. Long-term use in the environment with high humidity can easily reduce the service life. Accidentally sprinkling water into the machine may cause a short circuit.
2. Keep your back at least 1 foot away from the wall or other obstacles.
3. The heater will still blow the wind for 20 seconds after Tip-over or turn off to cool the heating elements and protect the machine.
4. You need to turn on the back main power switch.
5. Due to the addition of a protective layer (healthy material) to the heating elements, there may be a slight odor during the first few USES.
6. We have also passed the international ROHS and ETL certification. So it’s 100% safe. Using V-0 flame retardant material, the heater will not fire.
Conclusion
By our suggestions above, we hope that you can found marathon 65 gal hot water heater for you.Please don’t forget to share your experience by comment in this post. Thank you!
