The 10 Best Kleen Water Filter

Four KleenWater Filters compatible with 3M Cuno Aqua-Pure AP810, AP801, Whirlpool WHKF-GD25BB

4.5 inch x 9.875 Inch water filter alternative cartridges. This KleenWater brand water filter replacement cartridge is a high quality, low cost alternative to the original manufacturer AP810. The rigid polypropylene construction effectively removes dirt and sediment with impressive flow rates of up to 20 gallons per minute. Each cartridge contains two distinct micron layers. Larger particles are trapped near the exterior and progressively finer particles towards the filter core. Thus the cartridge has exceptional solids-holding capacity and will perform longer. The KleenWater KW810EC features plastic end caps with gaskets and a raised ridge grooved design which provides a significant increase in surface area. This replacement cartridge is an ideal choice for the value conscious consumer. The cartridge should be changed every 6 – 12 months or upon noticeable pressure reduction. 5 Micron gradient density melt blown polypropylene construction. To provide perspective to the 5 micron sediment entrapment rating it is important to note the naked human eye can see down to 20 micron and a human hair is 100 microns in diameter.

Also included are 4 RGAP801-AP802 water filter o-rings. These are made of NSF approved Nitrile rubber also known as Buna-N. It is important to change your o-ring at regular intervals to ensure a reliable water tight seal between the filter head and filter sump. It is recommended to keep a spare o-ring to avoid an urgent situation.

Our best, high quality whole house water filter. Complete filtration system with 1 inch inlet/outlet by KleenWater.

This convenient KleenWater package is an impressive value and is ideal for residential and even commercial / industrial applications.

Our filter housing is manufactured in Italy from the highest quality and safest materials. The transparent sump is constructed of polyethylene which is considered very safe by scientists adept at the effects of plastic in the food and beverage industry. Polyethylene is also very recyclable. It is manufactured with a proprietary procedure saving up to 60% of energy in injection molding compared with standard plastics. This filter is very rugged and boasts a 120 psi maximum working pressure. A built-in pressure relief vent and a spanner wrench are included for easy periodic cartridge change out. Please note replacement o-ring is model PWFRG357. A spare o ring is recommended to avoid an urgent situation.

The (3) KleenWater cartridges included are similar to the 3M Aqua-Pure AP810. These are rated for 5 microns and have a raised grooved surface to increase the cartridge surface area thus increasing the cartridge service life. To provide perspective to the 5 micron sediment entrapment rating it is important to note the naked human eye can see down to 20 micron and a human hair is 100 microns in diameter. Please enter KW810EC in the Amazon search bar to shop for cartridge replacements. The mounting bracket provides the strength and rigidity required for an sturdy installation.

Specifications:
– for use with industry standard size cartridge 4.5 inch O.D. x 9-3/4 inch
– flow rate 20 GPM
– temperature range 40-113 degrees F
– pressure range 20-120 psi
– dimensions 7 1/4 inch (W) x 13-5/16 inch (H)

This convenient package includes (4) KleenWater KW810 grooved cartridges and (2) KW101 o-rings. The cartridges are 4.5” (W) X 9.75” (L) and are rated for 5 micron sediment entrapment. These cartridges are designed to fit in the Whirlpool Water Filter WHKF-DWHBB. The raised groove designed has a very impressive surface area which prolongs the service life of the cartridge. The KW810 cartridge is compatible to the Whirlpool Model WHKF-WHPLBB and Filtrete Model 4WH-HDGR-F01. Replace cartridge every 6 months or upon substantial pressure reduction. The KleenWater KW810EC features plastic end caps with gaskets and a raised ridge grooved design which provides a significant increase in surface area. The o-rings are constructed of nitrile Buna rubber and will fit Whirlpool Model WHKF-DWHBB.

This convenient 7 piece high temperature filtration system by KleenWater includes:
Quantity (1) high temperature housing with 3/4″ female NPT inlet / outlet (Made in Italy)
Quantity (3) polypropelene 5 micron high temperature cartridges with scale inhibitor (Made in America)
Quantity (1) mounting bracket with hardware
Quantity (1) spanner wrench to make cartridge change quick and easy
Quantity (1) KleenWater brand spare o-ring (part# RG2K3W7) to prevent an urgent situation

The KleenWater brand KWHW2510 is made in Italy of reinforced polyamide. It is rated for maximum temperature or 176 degrees F. The inlet / outlet is 3/4″ FPT. A pressure relief valve allows easy cartridge change. The kit is provides tremendous convenience and facilitates a quick and easy installation. The water filter dimensions are approximately 5″(W) X 12″(L) and accept industry standard 2.5″(W) X 9.75″(L) cartridges. Our KW2510SWHT cartridge is made in the USA of 100% FDA compliant polypropylene. The graded density design provides 3 layers of filtration. Larger particles are trapped at the surface and progressively the cartridge allows for finer particle entrapment. Ultimately capable of 5 micron filtration near the cartridge core. To provide perspective to the 5 micron sediment entrapment rating, it is important to note the naked human eye can see down to 20 micron and a human hair is 100 microns in diameter. The grooved surface substantially increases the filter cartridge surface area thus it lasts significantly longer. The 7 gallon per minute flow rates allow for residential and light commercial applications. It is recommended the cartridge be changed every 3-6 months or upon substantial pressure reduction.

Please enter model # KW2510SWHT(3) in the Amazon search bar to re-order high temperature sediment cartridges.

The KleenWater Premier KWHW2510 is a heavy duty hot water filter for various high temperature filtration needs. The filter accepts any universal 2.5 x 10 inch cartridge. Cartridges are not included. See our other KleenWater Premier packages for combination filter/cartridge value packages.

This system includes:

(1) High temperature hot water filter by KleenWater
(1) Mounting bracket with 4 screws
(1) Filter wrench

The KWHW2510 filter is made in Italy with glass reinforced polyamide. It is rated for maximum temperature of 176 degrees F and 116 psi. The inlet / outlet is 3/4″ FPT.

The filter is equipped with a pressure relief valve which facilitates a quick and easy cartridge change. Filter dimensions are approximately 5 1/2 inch(W) X 12″(H).

Use the Amazon search bar to order KleenWater compatible cartridges:

KW2510SWHT-without-siliphosQty3 – high temp dirt sediment cartridges
KW2510SWHT(3) – high temp sediment cartridges with polyphosphate – prevents hardness scale formation
RG2K3W7 – replacement o-ring

KleenWater is a trademarked brand name owned by Pavel Water Filtration.

The rigid polypropylene construction effectively removes dirt and sediment with impressive flow rates of up to 20 gallons per minute. Each cartridge contains two distinct micron layers. Larger particles are trapped near the exterior and progressively finer particles towards the filter core. Thus the cartridge has exceptional solids-holding capacity and will perform longer. The KleenWater KW810EC features plastic end caps with gaskets and a raised ridge grooved design which provides a significant increase in surface area. To provide prospective to the 5 micron sediment entrapment rating it is important to note the naked human eye can see down to 20 micron and a human hair is 100 microns in diameter. The industry universal dimension of 4.5 inch x 10 inch makes it compatible with filter housing manufacturers such as GE, Culligan, Cuno, Omni, Kenmore, Whirlpool WHKF-DWHBB and Ametek “Big Blue”.

Specifications 4.5 x 9.75 inch universal dimension 75/25/5 micron filtration Up to 20 GPM flow rate Change cartridge every 6 months or upon substantial pressure reduction Includes one water filter housing replacement o-ring for Whirlpool WHKF-DWHBB . These cartridges have an approximate diameter of 4.5 inches. The o-ring itself actually measures approximately 5.465 inches (inside diameter). We recommend consumers keep a spare o ring available to avoid urgent situations

KleenWater is a trademark of Pavel Water Filtration.

Conclusion

By our suggestions above, we hope that you can found kleen water filter for you.Please don’t forget to share your experience by comment in this post. Thank you!