The Best Kegerator Bottle Regulator Parts

This direct draw kit includes everything you need to pressurize and tap a D system keg. It’s the perfect addition to a commercial kegerator that does not include the dispense components, and can be paired with a jumper line to connect to and serve from a jockey box. It includes a brand new 5 lb. aluminum CO2 tank with a glossy red, corrosion-resistant epoxy finish (empty), commercial grade double gauge regulator, US lever handle D system keg coupler, 5′ air line assembly (5 feet of 5/16″ blue air tubing and two plastic air line clamps), and neoprene washer.

This Pro Series dual-output double gauge regulator is loaded with high end features! If you plan on dispensing two separate kegs but do not need to have independent keg pressures, then this regulator will work for you. This regulator has a Y splitter with two independent shut off valves, so you can still run a single keg if you want to. The Pressure Adjustment Knob can be turned by hand so it does not require tools. It also features a pressure release valve so you can release pressure from the system at the regulator. This is great a great feature if you have a keg coupler that does not include a pressure release valve.

Kegco’s LHU5S-3 Elite Series Three Product Secondary CO2 Draft Beer Regulator has a bold design with elite functionality. Secondary regulators are used when you are attempting to dispense two or more kegs off of the same CO2 tank at different pressures. This secondary regulator has three manual pressure release valves and internal pressure relief valves that release pressure at 55-65 PSI, three large pressure adjustment knobs, and three brackets that allow it to be mounted to a wall or the inside of the keg refrigerator. In order to use this secondary regulator, you will still need a primary regulator with one output that connects to a secondary using a piece of air line. The LHU5S-3 has three 5/16″ barbs and three gauges that indicate how much CO2 pressure is inside of each keg.

You can use this primary regulator on any CO2 tank with a CGA-320 valve.
CO2 tanks have a male thread (CGA-320); these regulators have a female thread.
This regulator features dual gauges to measure PSI as well as the volume of CO2 in the cylinder, indicating how much CO2 is left in the cylinder and when you should have it refilled.
The knob on the front is used to adjust the output pressure.

MRbrew Double Gauge CO2 Keg Regulator, which has been specially designed to provide maximum convenience and durability in busy commercial environments
like bars, tasting rooms, and restaurants.

✮ The MRbrew regulator works with any Co2 Tank with a CGA-320 valve.
✮ Both gauges feature an easy to read design.
✮ The top gauge lets you know how much Co2 Pressure is in the keg and displays 0-60 psi.
✮ The second gauge lets you know how much Co2 gas is left inside the Co2 Tank and features a 0-3000 display.

So you’ll never be caught off guard by an empty CO2 tank again.

✮ This brewery-grade regulator features a multi-stage body for more precise control when making small adjustments to the output pressure.
The first stage reduces the output pressure from the tank to a more manageable pressure, and the second stage fine tunes that pressure for output to the keg

Allowing adjustments to be optimized for the operational range of beer, wine, coffee or whatever you’re dispensing. A large adjustment knob allows you to make
quick and accurate adjustments by hand and turns effortlessly, even in freezing temperatures.

✅ The regulator body is constructed of forged brass with all brass connections and components, a sintered brass inlet filter, integrated nylon tank connection
washer (and spare) and self resetting safety release valve.
✅ 5/16″ barbed output for use with 5/16″ ID hose
✅ Integral safety pressure relief valve releases at 45 PSI
✅ Large hand control makes it easy to adjust the presure inside keg
✅ Inlet nipple has a permanent thick nylon seal that eliminates one source of leaks, so you will not need to use a new fiber washer every time the tank is changed

✮Regulators are all pressure tested to assure reliability in the field

✮What You Get: MRbrew Keg Regulator, Welcome Guide, Our Worry-free 45 Days Money-back 18-month Warranty and Friendly Customer Service.

✹Double Gauge Mixed Gas Regulator have regulator rubber Protector Boot(2pc).
✹To prevent bumps and scratch the dial ensure accuracy and beauty.
Specification:
– 0-60 PSI Working Pressure,
– 0-3000 PSI Tank Pressure.
– Better Design of Safety Pressure Relief Valve springs (Inside instead of Outside) also have higher fatigue strength and durability.
– GA 320 CO2 Pressure Regulator light weight,All you need to install this is an adjustable wrench.
– Each CO2 Beer Regulator Pressure Kegerator is supplied with 2 O-ring washers (One installed inside and the other tied onto the Regulator.

The Kegco 542 Pro series works with any Co2 Tank with a CGA-320 valve and measures PSI, as well as the volume of the Co2 gas in the Cylinder. The regulator body is constructed of forged brass with all brass connections and components, a sintered brass inlet filter, integrated nylon tank connection washer (and spare) and self resetting safety release valve. Both gauges feature an easy to read design. The top gauge lets you know how much Co2 Pressure is in the keg and displays 0-60 psi. The second gauge lets you know how much Co2 gas is left inside the Co2 Tank and features a 0-2000 display. A large adjustment knob with a lock ring allows gas flow to be changed without the need for a screw driver. This regulator includes a tamper proof safety pressure relive valve that releases at 45 psi. There is also a shut off valve that allows for instantly shutting off pressure to the keg without backing up your gas line.

PRE-ASSEMBLED. Includes 5ft of 5/16″ ID premium Bevlex tubing, 2x swivel nut, 2x worm clamp, and MFL gas disconnect.

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy Kegerator Bottle Regulator Parts, eg:

• What are Top 10 Kegerator Bottle Regulator Parts for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 Kegerator Bottle Regulator Parts to buy?
• What are Top Rated Kegerator Bottle Regulator Parts to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Kegerator Bottle Regulator Parts?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Kegerator Bottle Regulator Parts.
• Before deciding to buy any Kegerator Bottle Regulator Parts, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose Kegerator Bottle Regulator Parts and What you should consider when buying the Kegerator Bottle Regulator Parts and Where to Buy or Purchase the Kegerator Bottle Regulator Parts. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 Kegerator Bottle Regulator Parts of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Kegerator Bottle Regulator Parts.