minmommy 
Nowadays, there are so many products of ice maker water line split valve in the market and you are wondering to choose a best one. You have searched for ice maker water line split valve in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings ice maker water line split valve which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
SharkBite 24983A Service Tee Stop Valve, 1/2 inch x 1/2 inch x 1/4 inch, Quarter Turn, Compression Service Stop Fitting, Water Valve Shut Off, Push-to-Connect, PEX, Copper, CPVC, PE-RT
- INSTALLS IN SECONDS: 1/2″ x 1/2” x 1/4″ threaded compression tee shut off valve requires no special tools, no soldering, no crimping or glue. Just push to create a watertight seal
- PERFORMANCE: Rated to 200 psi and 200 Degree F. Use in Potable water and Hydronic Heating applications
- COPPER, PEX, CPVC, PE-RT: SharkBite hose connector inlet fits Copper, PEX, CPVC and PE-RT Pipe and connects them in any combination
- QUALITY: Only SharkBite’s quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand that can ensure a clean, leak-free connection
- RESIDENTIAL and COMMERCIAL: All SharkBite fittings meet the same standards for commercial and residential plumbing applications
CUT. PUSH. DONE.
The SharkBite Connection System makes any plumbing project fast and easy with our unique push-to-connect technology. When you insert a pipe into the SharkBite quick connect fittings, the stainless steel teeth bite down and grip the pipe, while the specially formulated O-ring compresses to create the perfect watertight seal.
We use high quality DZR Lead Free Brass for our 1/2” x 1/2” x 1/4” 1/4 Turn Tee Stop Valve. Chrome plated valve for an attractive appearance. This SharkBite Tee Stop allows you to easily and effortlessly tap into a current or new plumbing line and run a 1/4” compression line out to an end fixture. Makes it easy to add a humidifier, dishwasher, ice maker, faucet installation or toilet installation to a new or existing line. Alternatively, can be used as a saddle valve.
Our product works with your existing plumbing, is easy to disassemble for changing fittings, and can be rotated for easier installation in tight spaces. SharkBite push connect fittings are the no fuss way to fix small leaks or plumb a whole house. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results.
SHARKBITE
SharkBite is a provider of plumbing and water control systems for domestic, commercial and industrial applications. As the world leader and hallmark of push-to-connect plumbing solutions, our goal is to continue innovating the plumbing trade with new solutions that improve efficiency and performance. Trusted by plumbing professionals, SharkBite manufactures a wide range of plumbing fittings, water control valves and PEX pipe, making it the only total plumbing solution from meter to fixture.
PureSec 2018 HV1414 mini white plastic quick fitting straight inline shut off Ball valve Hand valve for tubing OD 1/4"x 1/4"used for RO system refrigerator ice maker coffee machine(Pack of 5)
- 100% BPA free, 100% leak free, 100% Re-useable
- Fits tubing OD 1/4″on most RO system
- Connect and disconnect quick and easy without any other tools
- Suitable for use in hot and cold water applications
- Applications include RO system beverage dispensing refrigerator ice maker coffee machine etc
What is it?
PureSec 2018 HV1414 mini white plastic quick fitting straight inline shut off Ball valve Hand valve is made of 100% BPA Free thermoplastic material (Polypropylene), which is suitable for use in hot(140°F Max) and cold (33°F Min.)water applications. It adopts Push-Fit technology, which allows users to connect and disconnect quick and easy without the need of any other tools. It gives full flow and positive shut off without leakage, which is very easy to install. Valve act is 90 degrees, full on to full off, with no seepage.This little valve fits standard tubing OD 1/4″Copper, CPVC, PEX and PVC tubing for most RO systems
Where to use it ?
Applications include RO system, beverage dispensing, refrigerator ice maker, coffee machine etc. This quick connect fitting is perfect for hooking up a kitchen water supply , it isolate water line without shutting off all the cold water to the kitchen. It will save you lots of work getting to replace your in-line water filter without having to turn the water off in the basement or under the sink.You can also use it to run the RO System to the fridge ice maker.
How to use it ?
Just pop in your 1/4″tubing into either end, pushing until it won’t go in. To remove, just push in the outer circle on either end and pull right out. You need to make sure the tubing is cut squared to insure no leaks.
PureSec 2018 HV1414 mini white plastic quick fitting straight inline shut off Ball valve Hand valve is quality, reliability, and economy in potable water service.
What’s in the package?
PureSec 2018 HV1414 mini white plastic quick fitting straight inline shut off Ball valve Hand valve
“C” clip
Refrigerator Icemaker Kit 1/4" Od Ro Ice Maker for Reverse Osmosis Systems Refrigerator Water Filters
- Fluid Admitted:Air, Vacuum, Water (No Freezing)
- Working Pressure:0-1.0mpa | 0-150psi. Proof Pressure:3.0Mpa | 435psi
- Negative Pressure-100Kpa | -29.5 In Hg. Body: Brass Seal, O-Ring NBR
- Working Temperature: 0-50°C | 32～140°F. Applicable Tube:PU / PA / PE / PVC
- push to connect water fittings 1/4″ 2 valve 2 tee 2 elbow 2 straight 1/4 od 16.5 feet nylon tube
User’s Guide
1. Except air and water,don’t attempt to use the fittings on other fluids
2. The tube fitting is prohibited where spark and fire might be occurred
3. The tube fitting is prohibited if water temperature is above 60’C
4. Never apply tube joint with additional external load(bending,twist or
pulling),otherwise damage or leakage will be occurred.
Caution
Check the end of tubing for a right angle cutting and check the external surface of
tubing for any damage or scratch.Please refer to following instruction in connection
of tubing.When you insert the air tubing into the joint,you will have two-step
feeling.Section one is locking claw and section two is sealing ring.Must insert tube
into section two.
Sleeve is used in tubing connection and disconnection.The sleeve is designed as an
oval shape,which is covienient in assembly and disassembly.However,round sleeve is
available to met any special demand the product has limited space for oval
sleeve.After connection of tube joint and tubing,always try to pull tubing and ensure
its firm connection.
Always use proper tool to tighten external hexagonal and internal hexagonal parts of
the tube fitting.Always apply recommended torque on screws otherwise extra torque
might damage thread and cause air leakage while insufficient torque might cause
loose screws and air leakage.
After Screws are tightened,you may adjust the direction of tubing with most of our
tube joint.If it is hard in adjustment,you may apply recommended torque to turn
screw to adjust direction of tubing.
Certified Appliance IM300SS Ice Maker Connectors, 25-Foot
Product Description
Certified Appliance IM300SS Ice Maker Connector (25 Feet Long), Braided Stainless Steel, 1/4 inch Comp X 1/4 inch Comp
From the Manufacturer
Ice Maker Connectors (25-Foot)
Condensate Drain Pump PC-40B form FUJIWARA, Condensation Removal Automatic Pump for HVAC, Dehumidifier, Furnance, Ice Maker and Replace Water Pumps (FUJ-40S) (FUJ-40S)
- Condensate drain pump professional design for HVAC, condensation removal hidden in the pipline. Model: FUJ-40S Suitable for AC 3-5HP power.
- This condensate pump adopts 100-220V wide voltage design, 3w power and energy saving and environmental protection, <
- 18db low noise, even the bedroom can also use it quietly.
- This condensate drain pump maximum lift is 32ft gives you more choices about where to use. 10.5GPH flow drains faster than others.
- FUJIWARA condensate drain pump will not damage the original house decoration, simple and quick installation, automatic switch and the design of the alarm and anti-backflow valve is safer.
- 12 months quality assurance, if there are any quality problems, you cancontact 24/7 customer service to request a refund and get your money back.
Similar items with 4 stars and above
LASCO 06-9111 Angle Stop Add-A-Tee Valve, 3/8-Inch Compression Inlet X 3/8-Inch Compression Outlet X 3/8-Inch Compression Outlet, Brass
- The product is 3/8×3/8×3/8ANG Stop Tee
- Easy and simple use kit
- The product is manufactured in China
- Inlet 3/8″ OD female compression x 3/8″ OD compression x 3/8″ OD compression
- Install on angle stop
- Used for adding an outlet
- Lead free product, meets California AB-1953, Vermont, and new federal standards for low lead applications
- Rough brass construction
FS-TFC Ice Maker Water Line Kit and Refrigerator Water Line Fridge Water Line Kit for Reverse Osmosis Systems & Water Filters, 25ft 1/4" Tubing with 1/4" Push-In and Compression Fittings
- 【Easy installation】Push-in quick connect fittings offer easy DIY installation with no tools required
- 【Compatibility】Works with most reverse osmosis and water filter systems using 1/4 inch standard tubing
- 【Effectiveness】Enjoy clear & delicious pure ice cubes and RO water at your fridge dispenser
- 【Multi-purpose】Provides water to refrigerators,Reverse Osmosis (RO) filter system,ice makers, water coolers and dispensers, humidifiers and more
- 【Pakage includes】Kit includes 25 feet 1/4″ tubing, a 1/4″ x 1/4″ x 1/4″ “T” valve, an inline 1/4″ x 1/4″ shut off valve, a compression fitting set.
Why choose the ice maker kit?1. This high-quality icemaker kit will provide you with clear and sparkling ice cubes and drinking water at your refrigerator by routing purified water from your existing reverse osmosis system. 2. The tested design allows users to connect and disconnect quick and easy without the need of any other tools. Applications include multiple potable liquids such as reverse osmosis drinking water, beverage dispensing, coffee machines, RV and Marine, misting systems, ice makers and many more. 3. If you have a reverse osmosis system and a refrigerator with an ice maker and/or water dispenser, this kit is perfect for you. A reverse osmosis filtration system hands down out performs a single inline carbon filter found in most popular refrigerators. So it’s smart to connect RO with your refrigerator’s water line. Parts List: -1/4 inch water tubing (25 ft. ) -a 1/4″ x 1/4″ x 1/4″ “T” valve -an inline 1/4″ x 1/4″ shut off valve -a compression fitting -a independent inline 1/4″ x 1/4″ valve 100% quality assurance. If you have any problems, please contact us, we’ll reply to you in 24 hours.
WATTS P-667 Ice Maker Tee Valve, 1/2-Inch Cts x 1/4-Inch Od
- 1/2 Cts x 1/2 Cts x 1/4 O.D. Quick connect tee valve for use with 1/2″ Copper, PEX, CPVC, polybutylene and 1/4″ O.D. Pex, polyethylene or copper Supply lines for ice makers and water connections
- Made from high quality materials and highly durable
- Manufactured in China
- Watts quick connect products are the easiest method on the market for joining copper, CPVC, and PEX (LDPE, MDPE, HDPE) tubing
- Plastic quick connect TEE with 1/2-Inch CTS on two sides with 1/4-Inch OD ball valve on third side
- Perfect for DIY pipe repair
- Approvals include FDA, ANSI/NSF-61, NSF-14, CSA B1375, ASTM F877, NSF-UP, and IAPMO ASSE 1061-2006
- Rated for 250psi at 75 degrees F and 100psi at 180 degrees F
Product Description
1/2 CTS x 1/2 CTS x 1/4 O.D. quick connect tee valve for use with 1/2” copper, PEX, CPVC, and 1/4” O.D. PEX, polyethylene or copper supply lines for ice makers and water connections in refrigerators.
From the Manufacturer
This fitting incorporates stainless steel gripping teeth in the collets. These corrosion resistant teeth allow the connectors to interconnect with multiple materials without the need for special tools. It works with copper, CPVC, and PEX (LDPE, MDPE, HDPE) tubing.
Condensate Pump PC-320A form FUJIWARA, Condensation Removal Automatic Pump for HVAC, Dehumidifier, Furnance, Ice Maker and Replace Pumps (FUJ-40L)
- Condensate Drain Pump Professional Design for HVAC, Condensation Removal Hanging on the Wall. Model: FUJ-40L Suitable for AC 3-5HP power
- This condensate pump adopts 100-220V wide voltage design, 3w power and energy saving and environmental protection, <
- 18db low noise, even the bedroom can also use it quietly.
- This condensate drain pump maximum lift is 32ft gives you more choices about where to use. 10.5GPH flow drains faster than others.
- FUJIWARA condensate drain pump will not damage the original house decoration, simple and quick installation, automatic switch and the design of the alarm and anti-backflow valve is safer.
- 12 months quality assurance, if there are any quality problems, you cancontact 24/7 customer service to request a refund and get your money back.
Similar items with 4 stars and above
JG Speedfit ASVPP1LF 3/8-Inch by 3/8-Inch by 1/4-Inch Angle Stop Adapter Valve
Product Description
Feed water valve. White polypropylene with food grade EPDM o-rings, connects between valve and riser to the main water supply line for application in reverse osmosis, filtration systems, automatic coffee brewers, and ice-makers. Not for use with compressed air, explosive gases, petroleum spirits and other fuels, or for heating systems. Sizes indicated are thread male compression x thread female compression x tube OD.
From the Manufacturer
JG Speedfit is the easy to use, plastic push-fit system suitable for the plumbing of hot and cold water services and heating applications.
Conclusion
By our suggestions above, we hope that you can found ice maker water line split valve for you.Please don’t forget to share your experience by comment in this post. Thank you!
