The 9 Best Ice Maker Push Fitting

The iSpring fridge connection kit connects your reverse osmosis system or other water filters to your fridge. It can be used to supply your refrigerator’s ice maker or water dispenser, your coffee maker, etc. The kit comes with a 1/4″ x 1/4″ x 1/4″ “T” valve to branch off from the RO system, 20 feet of 1/4″ tubing, a 1/4″ x 1/4″ ball valve to shut off the flow when needed, and a compression connection set for connecting to the output location. The fridge connection kit will work with any RO system or filtration system that uses standard 1/4″ tubing. Why iSpring? Located in Alpharetta, Georgia for over a decade, iSpring Water Systems LLC is a family owned company specializing in reverse osmosis water filtration systems. Our products include residential and commercial reverse osmosis (RO) systems, whole house water systems, ultrafiltration systems, shower, faucet, and counter top filters, filter cartridges and housings, RO coolers, and kitchen faucets and fittings. Our aim is to make high quality drinking water accessible for all households. With affordable pricing, solid quality, prompt delivery, and top notch customer service, we hope to assist in bringing you great water for years to come.

The SharkBite ice maker installation kit has everything you need to install the water supply to your ice maker. The kit includes 1 SharkBite 1/2 in. Service slip tee, one 1/2 in. X 1/4 in. (3/8 in. O.D.) push-to-connect angle stop valve, a 10 ft. Coil of 1/4 in. Pex pipe, one 1/4 in. (3/8 in. O.D.) SharkBite x 1/4 in. O.D. Compression connector, and a 1/2 in. And 1/4 in. Disconnect clip to remove the pipe from the fitting if needed. The SharkBite service slip tee allows you to remove up to 2 in. Of your existing copper or cpvc line and add an angle supply stop valve. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. The included 10 ft. Pex coil connects to the push-to-connect angle stop valve 1/4 in. Outlet and the 1/4 in. Ice maker connector which will thread onto your ice maker. The pipe can be cut to the exact length needed so there is no excess supply line to coil providing a clean, tangle free look.

What is it?

PureSec 2018 SE14TU14STEM Mini white plastic quick fitting 90 degree elbow Stem plug in push connector , which is suitable for use in hot(140°F Max) and cold (33°F Min.)water applications. It adopts Push-Fit technology, which allows users to connect and disconnect quick and easy without the need of any other tools.Operated by hand, it replace threaded or flanged connections, which require wrenches. It fits standard tubing OD 1/4″Copper, CPVC, PEX and PVC tubing for most RO systems

Where to use it ?

Applications include RO system, beverage dispensing, refrigerator ice maker, coffee machine etc. This quick connect fitting is perfect for a water line going to your fridge or your water line under your sink for a filtration system.This will take the headache out of an under counter water filter installation

How to use it ?

Just pop in your 1/4″ tubing into one end, pushing until it won’t go in. Then plug in the stem part to the place you need to connect . To remove, just push in the outer circle on each end and pull right out. You need to make sure the tubing is cut squared to ensure no leaks. Be sure you cut the tubing even and straight, without crimping it. Then insert straight, and all the way into the connector. If it’s crooked, or not inserted all the way, or crimped, it may leak

PureSec 2018 SE14TU14STEM Mini white plastic quick fitting 90 degree elbow Stem plug in push connector is quality, reliability, and economy in potable water service.

What’s in the parcel?

PureSec 2018 SE14TU14STEM Mini white plastic quick fitting 90 degree elbow Stem plug in push connector

“C” clip

SharkBite Ice Maker Outlet Box with Water Hammer Arrestors
The SharkBite Ice Maker Outlet Box with SharkBite quarter turn push-to-connect fittings allow for simple installation of a water main supply line with a quick and easy shutoff valve for refrigerator, ice maker, and water dispensers. This product is lead-free compliant and is offered with water hammer arrestors for water shockwave prevention. The box can be mounted to the left or right of the stud bay and needs no additional support framing.

CUT. PUSH. DONE.
The SharkBite Connection System makes any plumbing project fast and easy with our unique push-to-connect technology. When you insert a pipe into the SharkBite lead free quick connect fittings, the stainless steel teeth bite down and grip the pipe, while the specially formulated O-ring compresses to create the perfect watertight seal. No soldering, no clamps, no glue.

Our product works with your existing plumbing, is easy to disassemble for changing and reusing fittings, and can be rotated for easier installation in tight spaces. Perfect for joining Copper, PEX, CPVC or PE-RT pipe, SharkBite is the no fuss way to fix small leaks or plumb a whole house. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results.

Product Description

1/2 CTS x 1/2 CTS x 1/4 O.D. quick connect tee valve for use with 1/2” copper, PEX, CPVC, and 1/4” O.D. PEX, polyethylene or copper supply lines for ice makers and water connections in refrigerators.

From the Manufacturer

This fitting incorporates stainless steel gripping teeth in the collets. These corrosion resistant teeth allow the connectors to interconnect with multiple materials without the need for special tools. It works with copper, CPVC, and PEX (LDPE, MDPE, HDPE) tubing.

What is it?

PureSec 2017 UTA14X3 mini white plastic quick fitting union tee connector is made of 100% BPA Free thermoplastic material (Polypropylene), which is suitable for use in hot(140°F Max) and cold (33°F Min.)water applications. It adopts Push-Fit technology, which allows users to connect and disconnect quick and easy without the need of any other tools.Operated by hand, it replace threaded or flanged connections, which require wrenches. It is used to branch off to different outlets for your RO unit.This Tee connector fits standard OD 1/4″ Copper, CPVC, PEX and PVC tubing for most RO systems

Where to use it ?

Applications include RO system, beverage dispensing, refrigerator ice maker, coffee machine etc. This quick connect fitting is perfect for Tee in a water line going to your fridge or T off your water line under your sink for a filtration system as well as run two reverse osmosis faucets in back to back bathrooms from a single R/O unit. This will take the headache out of an under counter water filter installation

How to use it ?

Just pop in your 1/4″ tubing into each end, pushing until it won’t go in. To remove, just push in the outer circle on each end and pull right out. You need to make sure the tubing is cut squared to insure no leaks. Be sure you cut the tubing even and straight, without crimping it. Then insert straight, and all the way into the connector. If it’s crooked, or not inserted all the way, or crimped, it may leak

PureSec 2017 UTA14X3 mini white plastic quick fitting union tee connector is quality, reliability, and economy in potable water service.

What’s in the parcel?

PureSec 2017 UTA14X3 mini white plastic quick fitting union tee connector

“C” clip

Why choose the ice maker kit?1. This high-quality icemaker kit will provide you with clear and sparkling ice cubes and drinking water at your refrigerator by routing purified water from your existing reverse osmosis system. 2. The tested design allows users to connect and disconnect quick and easy without the need of any other tools. Applications include multiple potable liquids such as reverse osmosis drinking water, beverage dispensing, coffee machines, RV and Marine, misting systems, ice makers and many more. 3. If you have a reverse osmosis system and a refrigerator with an ice maker and/or water dispenser, this kit is perfect for you. A reverse osmosis filtration system hands down out performs a single inline carbon filter found in most popular refrigerators. So it’s smart to connect RO with your refrigerator’s water line. Parts List: -1/4 inch water tubing (25 ft. ) -a 1/4″ x 1/4″ x 1/4″ “T” valve -an inline 1/4″ x 1/4″ shut off valve -a compression fitting -a independent inline 1/4″ x 1/4″ valve 100% quality assurance. If you have any problems, please contact us, we’ll reply to you in 24 hours.

This Eastman 60233 Pex Pre-assembled Ice Maker Outlet Box is designed for recessed residential applications. It has a 1/2 inch Crimp PEX inlet connection and a 1/4-inch OD compression outlet with a rough opening of 5-3/4-inch width x 4-7/8-inch height x 3-1/2-inch diameter.

The outlet box comes complete with a pre-installed 1/4-turn ball valve, support bracket, and a faceplate cover of dimensions 8-1/4-inch width x 7-5/16-inch height. It is built with one-piece box and flange design. Valves governed by this Standard are intended for service at temperatures between 34⁰ F (1⁰ C) and 180⁰ F (82⁰ C), with an allowable working pressure rating not less than 125 PSI (862 kPa).

Conclusion

By our suggestions above, we hope that you can found ice maker push fitting for you.Please don’t forget to share your experience by comment in this post. Thank you!