minmommy 
Nowadays, there are so many products of hot water tank heat element in the market and you are wondering to choose a best one. You have searched for hot water tank heat element in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings hot water tank heat element which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
44,948 Reviews Scanned
Rheem SP20060 Electric Water Heater Tune-Up Kit
Product description
Rheem SP20060 Electric Water Heater Tune-Up KitRheem SP20060 Electric Water Heater Tune-Up Kit Features: Repair Kit Plumber’s Pack
From the Manufacturer
Repair your water heater rather than replace it with the Rheem PROTECH Electric Water Heater Tune-Up Kit. This OEM quality Electric Water Heater Tune-Up Kit provides a quick and easy way to repair the most common items on an electric water heater. The tune up kit helps prolong the life of your water heater by renewing the key electrical components of your water heater. The kit includes two 4,500-watt, 240-volt water heater High Watt Density 1” screw-in elements with gaskets, one Therm-O-Disk 240-volt lower thermostats and one Therm-O-Disc upper thermostat. This kit is for units that have 1” screw in water heater elements. They will not fit Rheem Marathon or Eclipse water heaters.
Camco Hot Water Hybrid Heat Kit – Easily Converts Any 6-Gallon RV LP Gas Water Heater to 120V Electricity to Conserve Propane (11673)
- Converts any RV LP gas water heater to 120v electricity on demand
- Includes on/off power switch with mounting bracket and fully adjustable thermostat
- All necessary power cords and color-coded wire assemblies are included
- For 6 Gallon RV water heaters
- 425W element measures 6.25” long
With the RV Hot Water Heater you can convert your gas unit into an electric one and save the propane for your barbecue. It converts any 6-gallon RV LP gas water heater to 120 volts of electricity on demand and has a stainless steel cartridge that heats the water to temperatures ranging from 90 to 150 degrees Fahrenheit. This water heater conversion kit includes an on/off power switch with a mounting bracket and a fully adjustable thermostat for both convenience and safety. A 15 A/120 V electrical service is required to use this water heater, which includes a kit with all necessary power cords and color-coded wire assemblies to make setup quick and easy. This 6 gal RV water heater’s thermostat comes factory preset to 120 degrees Fahrenheit and might require adjustment, depending on your system.
Camco 02722/02723 4500W 240V Screw-In Foldback Water Heater Element Duron Style – Low Watt Density
Camco’s 4500W 240V screw-in type low watt density water heater elements are better suited for areas with problem water (hard water, lime, etc.) Most LWD elements are a fold-back style and provide no loss of efficiency yet reduce lime deposit buildup. This screw-in element has 1-3/8″ thread and is made for State Industries manufactured Duron Tank Water Heaters. Also used in Sears Duron tank water heaters. Each element includes two gaskets. The replacement element must be the same voltage and wattage as the element being replaced. Never exceed the nameplate rating on the water heater.
1500W Immersion Heater, Gesail UL-Listed Bucket Water Heater with Heating Element, Submersible Heater with Thermostat and Auto Shutoff Protection, Perfect for Home Travel and Winter Job – Silver
- High Power: 1500W, 120V immersion water heater, heat 5 gallons of water in few minutes, depending on the volume of the water, the original water temperature and container. It will heat water continuously over 180 degrees F and towards boiling(It can’t boil water).Please don’t use extention cord
- Thermostat Feature – The middle stainless steel tube contains a thermal overload safety switch, when water reaches a certain temperature(about 180-194 degrees F), it can automatically cycle on and off to maintain water temperature. It will not overheating and save power.
- Guard – The stainless-steel guard on the electric bucket heater protects the heating element from directly contacting persons or animals. The holes on the guard help release heat into the water faster.
- Simple Operation – Immerse in water at proper level. Plug into any grounded wall outlet. Check power indicator light in plug to make sure unit is on. Please don’t use extension cord.
- Safety and Widely Usage: UL-Listed, this bucket heater is safe for use in all pails, buckets and bathtubs, perfect for home, travel and winter time job.
GESAIL UL-Listed Bucket Water Heater
Use for construction industry, animal husbandry, car washing, indoor use and many other jobs in cold weather. Also can be used to heat small swimming pool. Make sure your wire and plug can withstand the load of (multiple) heater(s), otherwise it may cause overheating or burn off. Especially for continuous long time use.
This immersion heater is safe to use in a variety of containers and tubs, including plastic or metal pails, buckets, just make sure your container can contain boiling water.
Bucket Water Heater is only to be immersed up to the point of the electrical connection. Water level about 8” deep, make sure the water always covers the stainless-steel guard. The cord and handle are not designed to submerge in water.
Warning:
Please don’t use extension cord.
Never leave it unattended.
If the black plastic handle is too hot, please unplug it, wait until cool before using,otherwise a fire hazard will result.
DERNORD 24V 900W Stainless Steel Heating Element Submersible Water Heater Element
- 24v DC heater connects with batteries, solar panels, hydroelectric generators and wind turbine dump
- 1″ NPT flange fits USA standard water tank or your own custom heater tank
- UL and cUL listed to the safety standards
- Stainless steel surface has electropolish
- Supplied with silicon sealing washer which is flexible and waterproof
Bosch Electric Mini-Tank Water Heater Tronic 3000 T 4-Gallon (ES4)- Eliminate Time for Hot Water – Shelf, Wall or Floor Mounted
- CONVENIENT HOT WATER HEATER: 4 gallon point-of-use mini-tank fits under your sink to provide hot water right where you need it. Thermal efficiency is 98%. Dimensions : 13.75 W x 13.75 H x 13.5 D Inches
- LONG LASTING QUALITY: This electric water heater is easy to maintain and has premium glass-lined material for a long service life. (Amps 12A, Volts (VAC) 120)
- INDEPENDENT INSTALLATION: 36-37″ cord plugs into a 120 volt outlet for independent installation or in-line with a large hot water source
- FAST RECOVERY RATE: Eliminates long waits for hot water at your sink, get on demand hot water at your every need (supplies up to 2 sinks at a time)
- EASILY MOUNTED: Can be shelf, wall or floor mounted (bracket included)
- simply tap into the cold water line and install the water heater directly at the sink to provide hot water
Get hot water where it’s needed, when it’s needed with the Bosch ES4 Tronic 3000 T Electric water heater. This 4-gallon capacity point-of-use mini-tank fits right under your sink and provides a practical and effective solution to your hot water needs. This smaller model can be plugged right into a 120-volt outlet with the 36-37″ cord, or can be installed in-line with a larger hot water source to provide “on-demand” use. The glass-lined tank offers great insulation and added durability, while the heater’s fast recovery rate eliminates long waits for hot water. An external dial allows you to easily control the temperature range, and the temperature-and-pressure relief valve enhances your safety. The ES4 Tronic 3000 T from Bosch has a sleek and attractive exterior design that blends in seamlessly with existing décor when installed in a visible location, making this heater a great option in any room. Water Heater measures 13.75″ H x 13.75″ L x 13.5″ D and weighs 17.3 lbs. Do not operate this water heater if it is has a damaged cord or plug, if it is not working properly, or if it has been damaged or dropped
Bucket Water Heater, Kingwork UL-Listed 1500 Watts Immersion Heater Bucket Heater with Thermostat and Electric Immersion Heating Element, Submersible Water Heater with Auto Shutoff
- Quick Heating Speed:1500w 120v electric bucket heater , high power ensures a quick heating speed, use for cold weather and travel. Perfect for winter time jobs.
- Thermostat Feature – The silver-colored stainless steel tube contains a thermal overload safety switch, it can automatically cycle on and off as needed to maintain water temperature. It will not overheating and save power.
- Guard – The stainless-steel guard on the electric bucket heater protects the heating element from directly contacting persons or animals. The heater is safe for use in all pails, buckets and bathtubs, make sure the container designed to contain boiling water.
- Simple Operation – Immerse in water at proper level. Plug into any grounded wall outlet. Check power indicator light in plug to make sure unit is on. It will heat water continuously over 180 degrees F and towards boiling.
- UL-Listed to the safety standards, Package included: 1 pack bucket heater + Manual.
– The Kingwork bucket heater designed to heat water only. Use for construction industry, animal husbandry, car washing, indoor use and many other jobs in cold weather.
– The bucket heater is safe for use in all pails, buckets and bathtubs, will not damage plastic containers, make sure the container designed to contain boiling water.
– Bucket Water Heater is only to be immersed up to the point of the electrical connection. Water level about 8” deep.
– The size of this electric immersion heater is perfect rested in 5 gallon bucket.
– Handle and cord cannot be submerged.
– 1500W 120V.
– UL-Listed.
Warning:
Please don’t use extension cord.
Never leave it unattended.
If the black plastic handle is too hot, please unplug it, wait until cool before using,otherwise a fire hazard will result.
Rheem SP10869MM Screw-In 240-volt by 4500-watt Element, Premium Resistored Stainless Steel
- Element – 240V/4500W stainless steel resistored lwd – 1 in screw-in
- Watt density classification: lwd, input Voltage (V): 208, Input voltage (V): 240, wattage at 208V (W): 3380
- Element diameter (in.): .316, Element length – Flange to tip (in.): 13.44, mounting Type: threaded, ACTUAL thread size – Outside diameter.): 1-9/32
- Thread type series designation: NPSM, configuration: fold back, nominal thread size – (in.): 1, threads per inch: 11-1/2
Product Description
Rheem SP10869MM water heater 1 inch 4500W element resistored screw-in LWD 240V stainless steel
From the Manufacturer
Rheem is a leading provider of gas furnaces, heat pumps, air conditioners, air handlers, indoor air quality products, gas and electric water heaters.
Dernord 240V 5500W Immersion Ripple Foldback Brewing Water Tubular Heater Element with 1 Inch NPSM Thread White
- Low Watt Density Stainless Steel Immersion Ripple Foldback heating element
- Provides 5500w 240v of power
- The shape is to minimize length and maximize heated surfaces
- Easy to Install and fits most Water Heater Models of American
- Resists dry firing, lime deposits, and sand that would burn out ordinary elements
Product Features
5500W Element : Replacement American standard water heater parts
From the Manufacturer
Dernord 240v 5500w Immersion Ripple Foldback Brewing Water Tubular Heater Element has a compact, energy efficient design that is well suited for many applications. The type of element is to minimize length and maximize the heated surface.It provides uniform heat distribution and offered long performance life, and fits more models of American,for Bradford White, Craftmaster, General Electric and Whirlpool heaters.
Technical Details
Item Weight: 16.9ounces
Origin: China
Color: White
Tube length: 333mm
Tube diameter: 8mm
Item Package Quantity: 1
Mounting Type: Threaded
GESAIL 1500W Electric Immersion Heater, UL-Listed Bucket Water Heater with Guard, Submersible Heater with Thermostat and Auto Shutoff Protection, Perfect for Home Travel and Winter Job
- High Power: 1500W, 120V immersion water heater, heat 5 gallons of water in few minutes, depending on the volume of the water, the original water temperature and container. It will heat water continuously over 180 degrees F and towards boiling(It can’t boil water).
- Thermostat Feature – The middle stainless steel tube contains a thermal overload safety switch, when water reaches a certain temperature(about 180-194 degrees F), it can automatically cycle on and off to maintain water temperature. It will not overheating and save power.
- Guard – The stainless-steel guard on the electric bucket heater protects the heating element from directly contacting persons or animals. The holes on the guard help release heat into the water faster.
- Simple Operation – Immerse in water at proper level, plug into any grounded wall outlet, and then power on.
- Safety and Widely Usage: UL-Listed, this bucket heater is safe for use in all pails, buckets and bathtubs, perfect for home, travel and winter time job.
GESAIL UL-Listed Bucket Water Heater – Widely Application
Use for construction industry, animal husbandry, car washing, indoor use and many other jobs in cold weather. Also can be used to heat small swimming pool. Make sure your wire and plug can withstand the load of (multiple) heater(s), otherwise it may cause overheating or burn off. Especially for continuous long time use.
Safe for a Variety of Containers
This immersion heater is safe to use in a variety of containers and tubs, including plastic or metal pails, buckets, just make sure your container can contain boiling water.
Specification:
Condition: 100% Brand New
Material: Stainless Steel + Plastic
Item Weight: 0.9KG
Color: Silver & Black
Voltage: 120 Volts
Power: 1500W
Cord Length:1.8M/5.9 FT
Size: 44.5*8.8*8.8CM
Package Included:
1 x bucket water heater
Notice:
1. Make sure the water always covers the stainless-steel guard. The cord and handle(the black part) are not designed to submerge in water.
2.This immersion water heater can’t be used in hot tubs.
Warning:
Please don’t use extension cord.
Never leave it unattended.
If the black plastic handle is too hot, please unplug it, wait until cool before using,otherwise a fire hazard will result.
Conclusion
By our suggestions above, we hope that you can found hot water tank heat element for you.Please don’t forget to share your experience by comment in this post. Thank you!
