Best Hot Water Recirculating Pump Dedicated Line

This additional sensor valve is for homes with a branched hot water line. The kit includes a sensor valve and two 12 inch supply lines with adapter fittings. If your home has a branched hot water line simply install this sensor valve kit at the end of the branched line. No additional pumps are needed. Must have the Watts Instant Hot Water Recirculation Pump installed.

This sensor valve replacement is for the Hot Water Recirculation System. No additional pumps are needed. Must have the Watts Instant Hot Water Recirculation Pump installed.

Product Description

Specification:

• Voltage: 120 volts
• Item Weight: 8.5 pounds
• Overall Dimension: 6.2 x 6 x 5 inches
• Size: Full
• Color: Blue
• Material: Case
• Warranty: 1 Year

Never wait for hot water again! The Watts Hot Water Recirculating Pump provides hot water at every faucet or shower when needed, eliminating wasted water. It is easy to install on any water system and requires no additional piping. The unique design of the pump ensures quiet, maintenance-free operation. The system includes a built-in 24 hour, a dual setting programmable timer to activate the pump only when needed. System that provides instant hot water to every faucet or shower in a home when you need it. Stop throwing money down the drain and waiting for your hot water.

From the Manufacturer

The Watts Premier hot water recirculation pump puts hot water at every tap when you want it. Saves up to 15,000 gallons per year. The pump brings convenience and savings to your home, giving you hot water instantly at every faucet, when you need it. This unique product is easy to install and not only provides you with the convenience of hot water when you need it, but saves an average of over 11,000 gallons per year. *May not work with a tankless water heater.

Product Description

The auto circ pump is installed under the sink or faucet farthest from the water heater – where hot water usually takes the longest amount of time to arrive. A built-in temperature sensor automatically turns the autocirc pump on when the water temperature in the hot water supply line cools down to 85º F. This cool water in the hot water supply line is then pumped into the cold water line and back into the water heater. The autocirc pump turns off automatically when the hot water supply line to the faucet reaches a temperature of 95º F, ensuring the instant availability of shower warm water with maximum temperature hot water only seconds behind. When the pump is automatically turned off by the built-in thermostat, an auto closure device prevents hot or cold water from mixing in either supply line. Another beneficial feature is that hot water will also be instantly available at all other faucets in the supply line between the water heater and the faucet where the autocirc pump is installed. Does not require a return line. Requires only 14 watts of power. Packaged complete with a 6 ft. long power cord. Requires only one pump and one installation for all fixtures on the hot water plumbing line. Has built-in fixed thermostat. Has a built-in 24 hour timer which allows the selection of system operating periods to suit family usage. Saves the average family of four up to 17,000 gallons of water annually.. Long lasting, silent operation. Saves energy, money, water and pays for itself in a short period of time (see additional images for energy saving chart). No shaft, no seal. Maintenance free without blockage. Single bearing design. Resistant to scale build up.

From the Manufacturer

The Laing Pump is installed under the sink or faucet farthest from the water heater – where hot water usually takes the longest amount of time to arrive. A built-in temperature sensor automatically turns the pump on when the water temperature in the hot water supply line cools down to 77º F. This cool water in the hot water supply line is then pumped into the cold water line and back into the water heater. The Laing pump turns off automatically when the hot water supply line to the faucet reaches 91º F, ensuring the instant availability of shower warm water with maximum temperature hot water only seconds behind. When the pump is automatically turned off by the built-in thermostat, an auto closure device prevents hot or cold water from mixing in either supply line.The product should be installed by a licensed professional.

Specifications:
Rated Power:93/67/46W
Outlet:3/4 inch
Max Flow:36/29/20 L/min
Rated Head:20/16/13m
Volt/Freq:110-120V/60Hz

Application:
Used in Suitable for city buildings, suburban villas, houses, water and pressurized with industrial equipment,air conditioning,boilers,solar circulating water, hot water circulating warm and so on.

Advantages:
No leakage,low noise, environmental protection, aesthetics,ease of installation and so on.

Features:
High temperature resistance, antifraying,long life,maintenance-free,super silent,leak-tightness,high efficiency,low consumption,high flow and convenient installation advantages.

Performance Datas:
1).Suitable for medium: Hot water and ethanol maximum ratio of 1:1.
2).Performance: Liquid temperature range 0℉ – +212℉Maximum working pressure 10bar.
3).Ambient temperature: not higher than 40.
4).Voltage:110-120V(±10%) ,Frequency: 60Hz.
5).Motor: Protection class IP44 Insulation class F.
6).Material: Cast iron,PP,ceramics.
7).Mounting position: Shaft horizontal mounting.
8).Pump settings: Single-phase pipeline pump 3 files manually controlled single-phase motor is not overloaded casting pump length 130 mm.

Rheem AP17920 – Recirculation Pump Kit is used to recirculate hot water through a dedicated line in the house to give you hot water instantly at a faucet. Eliminate the wait time. For use with a Rheem tankless. Dedicated line required, can’t use a cross-over tee, and can’t use a timer. The Rheem tankless controls the pump using the molex connection. Needs to be a -1 or -2 tankless model.

Product Description

System includes an electronic circuit board, thermosensor mounted in stainless steel volute, 3/4″ CPVC threaded connections and internal check valve. Recommended for use with dedicated return lines in buildings up to 4,000 sq. ft. with tank water heaters. Or pipe runs up to 200 lineal ft. with tankless water heaters.

From the Manufacturer

System includes an electronic circuit board, thermosensor mounted in stainless steel volute, 3/4″ CPVC threaded connections, and internal check valve. Recommended for use with dedicated return lines in buildings up to 4,000 sq. ft. with tank water heaters. Or pipe runs up to 200 lineal ft. with tankless water heaters.

Product Description

The Giles/Chesterfried 32056 Charcoal Filter Assembly fits Giles Foodservice Equipment ventilation hood models EH-5, EH-6, FSH-5, FSH-6 and measures 24-inches x 18-inches x 7-inches. It’s recommended that filter’s be changed every 30-45 days so using the Giles/Chesterfried 32056 Charcoal Filter Assembly, a genuine OEM replacement part, is your best bet for safety and reliability. Giles Foodservice Equipment produces a wide variety of commercial equipment, which is marketed and sold worldwide. Their line includes electric and gas fryers, recirculating hoods, food preparation, hot food merchandisers, warming cabinets, rotisseries and various support products to fill the needs of any foodservice operator. They are dedicated to producing High Quality, Durable, User-Friendly and Cost Effective foodservice solutions while giving their customers, both large and small, genuine personal service.

From the Manufacturer

32056, Charcoal Filter Assembly, Giles and Chesterfried are a provider of superior food service equipment

Conclusion

By our suggestions above, we hope that you can found hot water recirculating pump dedicated line for you.Please don’t forget to share your experience by comment in this post. Thank you!