minmommy 
Nowadays, there are so many products of hot water pressure pump in the market and you are wondering to choose a best one. You have searched for hot water pressure pump in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings hot water pressure pump which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
32,689 Reviews Scanned
KOLERFLO 120W Water Pressure Booster Pump Automatic Shower Booster Pump with Water Flow Switch for Home/Shower (H15GR-15)
- Max Flow Rate: 396GPH(25L/min), Max Head: 49.2ft
- Max Pressure: 1.5bar (21.7 PSI)
- Liquid temperature range: 0 F- +212 F.
- This Booster Pump Automatically Adjusts to your needs, Increase the pressure of household water tank and keep a steady pressure.
- Powerful 120W Motor, High Quality 200W Water flow switch and full brass fittings included, All-in-one unit to provide to provide enough water pressure for your home use.
- Durable Cast iron brass constructions, Add up to 1.5bar (21.7 PSI) to your water, easy to use and install, specially designed for bathroom or kitchen.
- 2 to 4 faucets. Connection size: G 3/4″ on pump ports, NPT 1/2″ on unions, suitable to 1/2″ pipe. A minimum inlet flow rate of 0.6 GPM is required to ensure automatic starting.
Specifications:
1.Power: 120W
2.Max Head:49.2ft(15m)
3.Max Flow: 396GPH (25L/min)
4.Current: 1.1A
5.Capacitance: 15uf
6.Volt/Freq:110-120V/60Hz
7.Connection size on pump body: 3/4 inch
8.Size of union and flow switch: 3/4 inch to 1/2 inch
Description:
This booster pump absolutely solves the lit fire properly of shower owing to the lower pressure and unreliable pressure. When the tap water is of low pressure, the pump can boost pressure. It can also boost pressure for solar water heaters, boost pressure and circulate water for industrial equipment, and increase oxygen for rearing ponds and fish tanks.GR hot-water pumps boost pressure and circulate hot water for boilers besides above using. GZ best feature is that it can suck tap water from one or two floor below directly. So it completely solves the problem that the higher floors do not have water while the lower floors have.
Application & Characteristics:
1.There may be a problem of failing to retrofire the gas heater caused by the low pressure of water supply, you can solve this problem easily by fitting a home booster. Flexible tube fitting is viable.
2.The Home booster can increase the pressure of household water tank and keep a steady pressure.
3.The top floor of the apartment has problems of low water pressure, low water flux and failure to retrofire the gas heater, which is caused by the low height of water tank. The home booster can solve these problem.
4.It can supply oxygen, and keep the water clean.
5.The pump can be used as a circulator for some industry equipment, such as argon arc welding machine, laser apparatus, injection molding machine, foodstuff machinery, medical treatment equipment and so on, and also can supply water for small boilers.
Package included:
1).1*Booster pump body
2).1*Water flow switch
3).1*All brass fitting
4).4*Tri-clovers
5).1*White tape
SEAFLO 33-Series Industrial Water Pressure Pump w/Power Plug for Wall Outlet – 115VAC, 3.3 GPM, 45 PSI
- UL 778 & CSA 22.2 Certified
- Self-Priming up to 6 vertical feet
- 3.3 GPM Flow Capacity, 115V AC Current Draw .75 amps (1.2 Max Amps)
- Built-in Adjustable Pressure Switch that turns on/off at 45 PSI
- Plugs into standard wall outlet with pre-installed power plug
Description
SEAFLO’s SFDPA1-033-045-33 has an incredible feature list, high quality components, and amazing performance. UL 778 & CSA 22.2 Certified. The three-chamber high volume design, driven by a heavy-duty motor produces flow rates of 3.3 GPM. It is capable of self-priming up to 6 vertical feet and can run dry making it the price to performance leader. Everything in pictures is included such as a 51S01 Filter – 1/2 NPSM Inlet/Outlet and a 51F01 Fitting – 1/2 FNPSM x 1/2 Barb. This pump also features an electrical cord which can connect directly to any standard US outlet making installation easy and simple. The 115VAC 33-Series can be used in a variety of applications and industries such as marine, boat, RV, industrial, and janitorial thanks to its versatility.
Details
BRAND NEW SEAFLO SFDPA1-033-045-33 Industrial Water Pressure Pump
Sleek finish in Orange and White SEAFLO colors
UL 778 & CSA 22.2 Certified
Plugs into your standard wall outlet for ease of use
Self-priming up to 6 vertical feet
Features an automatic pressure switch that can be adjusted
Built-in check valve
Capable of run dry operation
Ignition Protected
Suitable for food grade applications
**For best results, please use supplied fittings. If using metal fittings, use caution when tightening**
Technical specifications
Voltage: 115VAC
Flow Capacity: 3.3 GPM
Amperage Draw: 0.75 A (MAX 1.2 A)
Valves: Viton
Diaphragm: Santropene
Inlet/Outlet: 1/2″ Threaded MNPT
Dimensions: Approx. 7.98″ x 5.11″ x 4.84″
SHYLIYU Pressure Pumps 1 inch Outlet 120W Water Pressure Booster Pump Automatic Shower Booster Pump with Water Flow Switch for Home/Shower
- ★ Package size: 9.25*6.69*5.51 inches
- ★ Material: Pump housing: Aluminum, Impeller: brass material, Motor wire: Copper, Shaft: stainless steel
- ★ This booster pump automatically adjusts to your needs, Increase the pressure of household water tank and keep a steady pressure, easy to use and install, just need a wrench to connect the pump to the pipeline, saving you the cost of plumbers
- ★ Specially designed for bathroom or kitchen, household cold/ hot water supply or circulation, it is fixed with automatic switch and full brass fittings included, All-in-one unit to make the water booster pump durable and provide enough water pressure for home use
- ★ One year warranty（Attention: Defects due to improper use of the pump are not within the warranty) If you have any problems for using our products,feel free to contact with us at the first time,we’ll made you satisfied with your purchase, and NOTE: It is prohibited to use with no water
Specification:
Model: PBZYB20GR-15
Voltage: 115V/60Hz
Power: 120W
Max. head: 15m/49ft
Max. flow rate: 25L/min, 7GPM
Speed: 3460r/min
Outlet: 1 inch, Water flow diameter: 3/4 inch (please check the size before you order)
Black circle cable: 1m(3.28ft)
Plug type: US plug
Features:
No leakage, low noise, environmental protection, aesthetics, ease of installation and so on
Application:
Suitable for city buildings, suburban villas, houses, water and pressurized with industrial equipment
Package Include:
1 x Booster Pump Body
1 x Water Flow Switch
1 x Accessories Pack
1 x Black Circle Cable: 1m(3.28ft)
1 x User Manual
Similar items with 4 stars and above
IEIK Water Pressure Diaphragm Pump DC 12V Pressure Switch Sprayer Pump 5LPM 1.35 GPM 116PSI 165ft Self Priming Pump for Caravan RV Boat Marine Agricultural Spraying Port
- FEATURES: This water pressure diaphragm pump has a configuration power of 60W, so it has a strong water flow (5L / PM 1.35GPM) and strong pressure (116 Psi = 8.0 Bar)
- if you worry about water pressure or water flow is small, I think This water pressure diaphragm pump will be a good choice
- due to pressure and flow greater than 4L / min water pressure diaphragm pump, so the noise will be slightly larger.
- FUNCTION: All water pressure diaphragm pump have sealed switch and coating to prevent corrosion
- water pressure diaphragm pump in the case of power supply, as long as there is water flow, it began to work, close the valve that will automatically stop working
- due to factory testing, the new water pressure diaphragm pump there are some Water, each water pressure diaphragm pump are subject to rigorous testing on the market.
- PARAMETER: Water pressure diaphragm pump vertical suction lift: 5ft (1.5m)
- Flow (MAX):5L/min
- Intake Pressure: 0.2Mpa
- Rated Pressure: 0.8Mpa
- Water pipe interface: 1/2 “screw thread
- Size: Approx. 16.5 x 9.5 x 6cm (L*W*H)
- APPLICATION: When installed correctly, marine duty fresh water pressure diaphragm pump provide years of operation
- This water pressure diaphragm pump can also be used for automatic pump, RV, boat, ocean, agricultural spray (weak acid and weak base) boats, camping trucks and trucks.
- NOTE: Water pressure diaphragm pump power requirements DC12V 5A-12A (not included)
- it is not submersible pump, pay attention to waterproof, to prevent short circuit.
Self-priming diaphragm pump DC 12V pressure switch
water flow :5L / PM 1.35GPM
strong pressure :116 Psi = 8.0 Bar
vertical suction lift: 5ft (1.5m)
Flow (MAX):5L/min
Intake Pressure: 0.2Mpa
Rated Pressure: 0.8Mpa
Water pipe interface: 1/2 “screw thread
Size: Approx. 16.5 x 9.5 x 6cm (L*W*H)
Package Includes:
1 x Diaphragm Water Pump
2 x Hose connectors
APPLICATION: marine duty fresh water pressure diaphragm pump; automatic pump, RV, boat, ocean, agricultural spray (weak acid and weak base) boats, camping trucks and trucks
NOTE: Water pressure diaphragm pump power requirements DC12V 5A-12A (not included); it is not submersible pump, pay attention to waterproof, to prevent short circuit.
Similar items with 4 stars and above
KOLERFLO 110V Water Recirculation Pump 120W Automatic Circulation Pump/Circulator Pump for Water Heater System(RS15-9 Red)
- Rated Power:120W
- Max flow：30L/min；Rated Head：25.9FT
- Liquid Temperature range -10 – +110℃；Voltage: 110V/120V, Frequency:60Hz
- Inlet/Outlet: 3/4 inch.And there’s no other fittings only pump included for this package.
- 120W Powerful motor, the Most powerful Type of this boost pump. It Can be used with water heater or hot water pressurization system,but not for potable water system.
- The built in flow switch will Automatically turns the booster pump off and on.you can also use it with a pressure switch.
- No leakage, low noise, environmental protection, aesthetics, ease of installation and so on.
- Compact and Durable: Pump housing: Cast Iron
- Impeller: Corrosion-resistant, Composite, PES
- Shaft: Ceramic
- Bearing: Carbon axial.
Product Details
Model: RS15-9
Rated Power:120W
Outlet: NPT 3/4 inch
Max Flow: 30L/min（8GPM）
Rated Head: 9m（25.9Ft）
Volt/Freq: 110-120V/60Hz
Applications
Used in Suitable for city buildings, suburban villas, houses, water and pressurized with industrial equipment, air conditioning, boilers, solar circulating water, hot water circulating warm and so on
Advantages
1.High efficiency, high flow, leak-tightness, low consumption
2.No noise environmental protection, ease of installation
3.No leakage, low noise, environmental protection, aesthetics, ease of installation and so on
4.Built-in high sensitive electronic sensors with three-speed control
Performance Datas
1) Suitable for medium: Hot water and ethanol maximum ratio of 1:1
2)The threads for this pump is NPT 3/4 inch,we suggest you’d better wrap some tapes around it.in case of leaking.
3) Performance: Liquid temperature range: 0℉ – +212℉Maximum working pressure 10bar.
4) Ambient temperature: not higher than 40
5) Voltage: 110-120V(±10%) ,Frequency: 60Hz.
6) Motor: Protection class IP44 Insulation class F
7) Material: Stainless Steel, PP, ceramics
8) Mounting position: Shaft horizontal mounting.
9) Pump settings: Single-phase pipeline pump 3 files manually controlled single-phase motor is not overloaded casting pump length 160 mm.
Similar items with 4 stars and above
BOKYWOX 110V 120W Home Water Pressure Booster Pump Water Pump for Whole House Shower System (W15GR-15A)
- 1.Durable cast iron brass constructions, Adds up to 1.5bar(21.7 PSI)to your water,easy to use and install.
- 2..Max Pressure: 1.5bar(21.7psi)
- Voltage: AC 110-120V Freqency: 60hz.
- 3.Powerful 120W motor, Water flow switch and fittings included, All-in-one unit to make things easier for you.
- 4. Automatically adjusts to your needs,Increase the pressure of household water tank and keep a steady pressure.
- 5.Suitable for 2 room(bathroom or kitchen) , 2 to 4 faucets. Connection size: G 3/4″ on pump ports, G 1/2″ on unions, suitable to 1/2″ pipe. A minimum inlet flow rate of 0.6 GPM is required to ensure automatic starting.
Similar items with 4 stars and above
BOKYWOX 110V 93W NPT3/4” 3-Speed Food Grade Home Recirculating Pump Hot Water Circulator Circulation Pump （RS15/6G）
- 1.Can be used directly in drinking water pipelines. The water taste of lubricating oil will disappear after 3 to 5 times of use. The shaft of pump should be kept horizontal after installation.
- 2.Max Pressure 11bar.Power Cord: 4.1ft. Liquid temperature range: 0℉ -+212℉
- 3.No leakage, low noise, environmental protection, aesthetics, ease of installation and so on.
- 4.Suitable for medium: Hot water and ethanol maximum ratio of 1:2. Not suitable for potable water.
- 5.Materials: Pump housing: Cast Iron
- Impeller: Corrosion-resistant, Composite, PES
- Shaft: Ceramic
- Bearing: Carbon axial.
Specifications:
Rated Power:93/67/46W
Outlet:3/4 inch
Max Flow:36/29/20 L/min
Rated Head:20/16/13m
Volt/Freq:110-120V/60Hz
Application:
Used in Suitable for city buildings, suburban villas, houses, water and pressurized with industrial equipment,air conditioning,boilers,solar circulating water, hot water circulating warm and so on.
Advantages:
No leakage,low noise, environmental protection, aesthetics,ease of installation and so on.
Features:
High temperature resistance, antifraying,long life,maintenance-free,super silent,leak-tightness,high efficiency,low consumption,high flow and convenient installation advantages.
Performance Datas:
1).Suitable for medium: Hot water and ethanol maximum ratio of 1:1.
2).Performance: Liquid temperature range 0℉ – +212℉Maximum working pressure 10bar.
3).Ambient temperature: not higher than 40.
4).Voltage:110-120V(±10%) ,Frequency: 60Hz.
5).Motor: Protection class IP44 Insulation class F.
6).Material: Cast iron,PP,ceramics.
7).Mounting position: Shaft horizontal mounting.
8).Pump settings: Single-phase pipeline pump 3 files manually controlled single-phase motor is not overloaded casting pump length 130 mm.
Similar items with 4 stars and above
SHYLIYU Pressure Booster Pumps 115V 3-Speed Cast Iron Booster Pump 3/4 inch Outlet 46/67/93W Circulator Pump for Home
- ★ Package size: 5.91*5.71*5.31 inches
- ★ Material: Pump housing: cast iron, Impeller: PP, Motor wire:100% Copper, Shaft: stainless steel
- ★ This booster pump has 3-speed switch to adjusts to your needs, Increase the pressure of household water tank and keep a steady pressure, easy to use and install
- ★ Specially designed for bathroom or kitchen, household water supply or circulation, it is fixed with a 3-speed switch
- ★ One year warranty（Attention: Defects due to improper use of the pump are not within the warranty) and NOTE: It is prohibited to use with no water
Specification:
Model: ZYBRS15/6-130
Voltage: 115V/60Hz
Power: 46/67/93W
Max. head: 6m/20ft
Max. flow rate: 50L/min, 13GPM
Speed: 3420r/min
Outlet: 3/4 inch, Water flow diameter: 1/2 inch (please check the size before you order)
Black circle cable: 1m(3.28ft)
Plug type: US plug
Features:
No noise environmental protection, ease of installation
No leakage, low noise, environmental protection, aesthetics, ease of installation and so on
Features:
Suitable for city buildings, suburban villas, houses, water and pressurized with industrial equipment and so on
Package Include:
1 x Circulation Pump
1 x Accessories Pack
1 x Black Circle Cable: 1m(3.28ft)
1 x User Manual
Similar items with 4 stars and above
BACOENG Auto ON/OFF Stainless Steel Pressure Booster Pump w/ Smart Controller for Tankless Water Supply Pressurization
- PARAMETERS – 110V/60Hz
- 0.6HP
- 1″ IN/OUT
- Provides a max. pressure of 4Bar and max. flow of 15.9GPM
- Suction 23ft.
- FOR TANKLESS SYSTEM – SAY NO TO PRESSURE TANK, directly installed in home water supply pipeline. It cycles on and off as water is used and the pressure drops. It does make a little noise, but most of the time it just stays quietly in the corner.
- FEATURES – Real-time monitoring of water, automatically stop working if the inlet pipe is lack of water
- Built-in check valve helps keep the pressure, prevent system from rapid starting and cycling.
- FOOD GRADE STANDARD – All of the components in contact with the pumped liquid are constructed from stainless steel 304, ensures complete hygiene and maximum resistance against corrosion.
- DURABLE & RELIABLE MOTOR – Built-in thermal overload motor protection
- Once set up, it would provide long-term stable service for residential homes, cabins and so on
- 18 month warranty
DECFLO 110V 90W 3/4 inch Home Water Pressure Booster Pump, Automatic Shower System Booster Pump with Water Flow Switch for Whole House/Shower
- 1. Max Pressure: 1bar(14.5 PSI)
- Max Head: 32.8ft
- Max Flow Rate: 5.5GPM(20L/min)
- Voltage: AC 110-120V
- Freqency: 60HZ . Liquid temperature range: 0 F- +212 F.
- 2. Connection size: G 3/4″ on pump ports, G 1/2″ on unions, suitable to 1/2″ pipe , 2 to 4 faucets. Suitable for bathroom and kitchen .
- 3.The booster pump with water flow switch can automatically adjusts to your needs, Increase the pressure of household water tank and keep a steady pressure. Energy saving ,no leakage,low noise.
- 4.Easy installation and operate:Durable cast iron brass constructions,Powerful motor and full brass fittings included, all-in-one unit to make the water booster pump durable and provide enough water pressure for home use.
- 5.Application: Specially designed for bathroom or kitchen, household cold/ hot water supply or circulation(conditioning, boilers, solar circulating water)；And suburban villas, city buildings,houses, water and pressurized with industrial equipment.
Specification:
1.Power: 90W
2.Voltage: 115V/60Hz
3.Current: 0.8A
4.Max Head: 10m/33ft
5.Max Flow rate: 20L/min, 5.5GPM
6.Speed: 3460r/min
7.Connection size on pump body: 3/4 inch
8.Size of union and flow switch: 3/4 inch to 1/2 inch
9.Black circle cable: 1.35m(4.4ft)
Features:
1.No leakage, low noise, environmental protection, aesthetics.
2.The coil uses 100% copper wire to ensure efficient and stable.
3.Easy installation, just need a wrench to connect the pump to the pipeline, saving the cost of plumbers.
4.Simple operation and save power. Automatically adjusts to your needs.Increase the pressure of household water tank and keep a steady pressure.
Application :
1.BOOST THE PRESSURE FOR GAS HEATER
There may be a problem of failing to retrofire the gas heater caused by the low pressure of water supply, you can solve this problem easily . Flexible tube fitting is viable.
2.BOOST THE PRESSURE FOR HOUSE WATER SUPPLY
The booster can increase the pressure of household water tank and keep a steady pressure.
3.BOOST THE PRESSURE OF THE WATER TANK IN APARTMENT BLOCK
The top floor of the apartment has problems of low water pressure, low water flux and failure to retrofire the gas heater, which is caused by the low height of water tank. The booster can solve these problem.
4.CIRULATION FOR FISHPOND AND AQUARIUM
It can supply oxygen, and keep the water clean.
5. CIRULATION FOR EQUIPMENTS
The pump can be used as a circulator for some industry equipment, such as argon arc welding machine, laser apparatus, injection molding machine, foodstuff machinery, medical treatment equipment and so on, and also can supply water for small boilers.
Package Include:
1 x Booster Pump
1 x Water Flow Switch
1 x Accessories Pack
1 x Black Circle Cable: 1.35m(4.4ft)
1 x User Manual
Conclusion
By our suggestions above, we hope that you can found hot water pressure pump for you.Please don’t forget to share your experience by comment in this post. Thank you!
