The 9 Best Hot Water Pressure Booster Pump

Specifications:
1.Power: 120W
2.Max Head:49.2ft(15m)
3.Max Flow: 396GPH (25L/min)
4.Current: 1.1A
5.Capacitance: 15uf
6.Volt/Freq:110-120V/60Hz
7.Connection size on pump body: 3/4 inch
8.Size of union and flow switch: 3/4 inch to 1/2 inch

Description:
This booster pump absolutely solves the lit fire properly of shower owing to the lower pressure and unreliable pressure. When the tap water is of low pressure, the pump can boost pressure. It can also boost pressure for solar water heaters, boost pressure and circulate water for industrial equipment, and increase oxygen for rearing ponds and fish tanks.GR hot-water pumps boost pressure and circulate hot water for boilers besides above using. GZ best feature is that it can suck tap water from one or two floor below directly. So it completely solves the problem that the higher floors do not have water while the lower floors have.

Application & Characteristics:
1.There may be a problem of failing to retrofire the gas heater caused by the low pressure of water supply, you can solve this problem easily by fitting a home booster. Flexible tube fitting is viable.
2.The Home booster can increase the pressure of household water tank and keep a steady pressure.
3.The top floor of the apartment has problems of low water pressure, low water flux and failure to retrofire the gas heater, which is caused by the low height of water tank. The home booster can solve these problem.
4.It can supply oxygen, and keep the water clean.
5.The pump can be used as a circulator for some industry equipment, such as argon arc welding machine, laser apparatus, injection molding machine, foodstuff machinery, medical treatment equipment and so on, and also can supply water for small boilers.

Package included:
1).1*Booster pump body
2).1*Water flow switch
3).1*All brass fitting
4).4*Tri-clovers
5).1*White tape

Specification:
1.Power: 90W
2.Voltage: 115V/60Hz
3.Current: 0.8A
4.Max Head: 10m/33ft
5.Max Flow rate: 20L/min, 5.5GPM
6.Speed: 3460r/min
7.Connection size on pump body: 3/4 inch
8.Size of union and flow switch: 3/4 inch to 1/2 inch
9.Black circle cable: 1.35m(4.4ft)

Features:
1.No leakage, low noise, environmental protection, aesthetics.
2.The coil uses 100% copper wire to ensure efficient and stable.
3.Easy installation, just need a wrench to connect the pump to the pipeline, saving the cost of plumbers.
4.Simple operation and save power. Automatically adjusts to your needs.Increase the pressure of household water tank and keep a steady pressure.

Application :
1.BOOST THE PRESSURE FOR GAS HEATER
There may be a problem of failing to retrofire the gas heater caused by the low pressure of water supply, you can solve this problem easily . Flexible tube fitting is viable.
2.BOOST THE PRESSURE FOR HOUSE WATER SUPPLY
The booster can increase the pressure of household water tank and keep a steady pressure.
3.BOOST THE PRESSURE OF THE WATER TANK IN APARTMENT BLOCK
The top floor of the apartment has problems of low water pressure, low water flux and failure to retrofire the gas heater, which is caused by the low height of water tank. The booster can solve these problem.
4.CIRULATION FOR FISHPOND AND AQUARIUM
It can supply oxygen, and keep the water clean.
5. CIRULATION FOR EQUIPMENTS
The pump can be used as a circulator for some industry equipment, such as argon arc welding machine, laser apparatus, injection molding machine, foodstuff machinery, medical treatment equipment and so on, and also can supply water for small boilers.

Package Include:
1 x Booster Pump
1 x Water Flow Switch
1 x Accessories Pack
1 x Black Circle Cable: 1.35m(4.4ft)
1 x User Manual

Specification:
Model: ZYBRS15/6-130
Voltage: 115V/60Hz
Power: 46/67/93W
Max. head: 6m/20ft
Max. flow rate: 50L/min, 13GPM
Speed: 3420r/min
Outlet: 3/4 inch, Water flow diameter: 1/2 inch (please check the size before you order)
Black circle cable: 1m(3.28ft)
Plug type: US plug

Features:
No noise environmental protection, ease of installation
No leakage, low noise, environmental protection, aesthetics, ease of installation and so on

Features:
Suitable for city buildings, suburban villas, houses, water and pressurized with industrial equipment and so on

Package Include:
1 x Circulation Pump
1 x Accessories Pack
1 x Black Circle Cable: 1m(3.28ft)
1 x User Manual

Specifications:
Rated Power:120W
Inlet/Outlet:3/4″
Max Flow:30L/min(8GPM)
Rated Head: 9m(25.9FT)
Volt/Freq:110-120V/60Hz

Application:
Used in Suitable for city buildings, suburban villas, houses, water and pressurized with industrial equipment, air conditioning,boilers, solar circulating water, hot water circulating warm and so on.

Advantages:
No leakage,low noise,environmental protection,aesthetics,ease of installation and so on.

Features:
High temperature resistance, antifraying,long life, full-automatic,maintenance-free, super silent,leak-tightness,high efficiency,low consumption,high flow and convenient installation advantages. Built-in high sensitive electronic sensors,the water will be flow when we open the switch.

Performance Datas:
1). Suitable for medium: Hot water and ethanol maximum ratio of 1:1.
2).Performance: Liquid temperature range is 0℃ – 100℃(0-212℉)， Maximum working pressure is 10bar.
3).Ambient temperature: not higher than 40℃（104℉）.
4).Voltage:110-120V(±10%) ,Frequency: 60Hz.
5).Motor: Protection class IP44 Insulation class F.
6).Material: Cast iron, PP, ceramics.
7).Mounting position: Shaft horizontal mounting.
8).Pump settings: Single-phase pipeline pump 3 files manually controlled single-phase motor is not overloaded casting pump length 160 mm.

Product Details
Model: RS15-9
Rated Power:120W 
Outlet: NPT 3/4 inch 
Max Flow: 30L/min（8GPM）
Rated Head: 9m（25.9Ft）
Volt/Freq: 110-120V/60Hz

Applications
Used in Suitable for city buildings, suburban villas, houses, water and pressurized with industrial equipment, air conditioning, boilers, solar circulating water, hot water circulating warm and so on

Advantages
1.High efficiency, high flow, leak-tightness, low consumption
2.No noise environmental protection, ease of installation
3.No leakage, low noise, environmental protection, aesthetics, ease of installation and so on
4.Built-in high sensitive electronic sensors with three-speed control

Performance Datas
1) Suitable for medium: Hot water and ethanol maximum ratio of 1:1
2)The threads for this pump is NPT 3/4 inch,we suggest you’d better wrap some tapes around it.in case of leaking.
3) Performance: Liquid temperature range: 0℉ – +212℉Maximum working pressure 10bar.
4) Ambient temperature: not higher than 40
5) Voltage: 110-120V(±10%) ,Frequency: 60Hz.
6) Motor: Protection class IP44 Insulation class F
7) Material: Stainless Steel, PP, ceramics
8) Mounting position: Shaft horizontal mounting.
9) Pump settings: Single-phase pipeline pump 3 files manually controlled single-phase motor is not overloaded casting pump length 160 mm.

Description
SEAFLO’s SFDPA1-033-045-33 has an incredible feature list, high quality components, and amazing performance. UL 778 & CSA 22.2 Certified. The three-chamber high volume design, driven by a heavy-duty motor produces flow rates of 3.3 GPM. It is capable of self-priming up to 6 vertical feet and can run dry making it the price to performance leader. Everything in pictures is included such as a 51S01 Filter – 1/2 NPSM Inlet/Outlet and a 51F01 Fitting – 1/2 FNPSM x 1/2 Barb. This pump also features an electrical cord which can connect directly to any standard US outlet making installation easy and simple. The 115VAC 33-Series can be used in a variety of applications and industries such as marine, boat, RV, industrial, and janitorial thanks to its versatility.

Details
BRAND NEW SEAFLO SFDPA1-033-045-33 Industrial Water Pressure Pump
Sleek finish in Orange and White SEAFLO colors
UL 778 & CSA 22.2 Certified
Plugs into your standard wall outlet for ease of use
Self-priming up to 6 vertical feet
Features an automatic pressure switch that can be adjusted
Built-in check valve
Capable of run dry operation
Ignition Protected
Suitable for food grade applications

**For best results, please use supplied fittings. If using metal fittings, use caution when tightening**

Technical specifications
Voltage: 115VAC
Flow Capacity: 3.3 GPM
Amperage Draw: 0.75 A (MAX 1.2 A)
Valves: Viton
Diaphragm: Santropene
Inlet/Outlet: 1/2″ Threaded MNPT
Dimensions: Approx. 7.98″ x 5.11″ x 4.84″

Specification:
Model: PBZYB20GR-15
Voltage: 115V/60Hz
Power: 120W
Max. head: 15m/49ft
Max. flow rate: 25L/min, 7GPM
Speed: 3460r/min
Outlet: 1 inch, Water flow diameter: 3/4 inch (please check the size before you order)
Black circle cable: 1m(3.28ft)
Plug type: US plug

Features:
No leakage, low noise, environmental protection, aesthetics, ease of installation and so on

Application:
Suitable for city buildings, suburban villas, houses, water and pressurized with industrial equipment

Package Include:
1 x Booster Pump Body
1 x Water Flow Switch
1 x Accessories Pack
1 x Black Circle Cable: 1m(3.28ft)
1 x User Manual

You love a good hot shower, not a slow trickle. The Simer 3/4 HP stainless steel pressure booster pump keep your water pressure going strong. This domestic water booster pump is a quick, easy, and cost-effective solution to boost your water pressure. Whether you’re in the shower or using the faucet, This powerful pressure booster will bring your water up to 40 PSI. This house inline pressure booster includes 6-foot 115-volt power cord. The sump pump arrives already set-up and ready to install. Even better still, this model works as needed by auto-activating when water pressure drops below a certain level. Good riddance to weak trickles of water and hello to on-demand power, with the Simer 3/4 HP stainless steel pressure booster pump.

Conclusion

By our suggestions above, we hope that you can found hot water pressure booster pump for you.Please don’t forget to share your experience by comment in this post. Thank you!