1. Operating pressure: 0.05 – 1.0 Mpa2. Theoretic pressure: 0.1 – 0.5 Mpa If the pressures over 0.5 Mpa, please installation a relief pipe. 3. Cold water supply: 5 – 29 ℃4. Hot water supply: 50 – 80 ℃5. Adjustable temperature range: 20 – 50 ℃6. The most comfortable temperature: 38 ℃ Under 0.3Mpa, cold water temperature within 18–23℃; hot water temperature within 60–80℃. 7. Safety test: If interrupted cold water supply within 5 seconds, the outflows reducing to 1.9L/Min automatically, the outflows less than or equal to150ml, the outflows temperature: less than or equal to 49 ℃.8. Life test: Testing under EN817, GB/T18145-2000 (over 70.000 cycles), Testing under CSA B125-98 ASSE 1016 (over 10.000 cycles).9. Sensitivity test: If inlet water temperature is constant, and the pressure in changeable about 20%, the outflows temperature changes less than or equal to 2℃; If inlet water pressure is constant and hot water temperature changes in 50-80℃, cold water changes in 5-29℃ then the outflows temperature changes less than or equal to 2℃.10. Applicable Standards：CSA B125-98 ASSE 1016 EN1111 AS-4032.111. The water supply pressure impacts on outflows temperature: Please read the following chart (Fig.1).

Product Description

R10000-UNBX

From the Manufacturer

A revolutionary system that allows easy changes to shower function, style, and appearance without altering the plumbing behind the wall-exclusively from Delta Faucet Company.

Product Description

R10000-UNBXHF Features: -Universal mount. -For use with showers only. This valve does not have an outlet for tubs.. -Drain Assembly Included: No. -Multi choice universal valve body only – accepts single, dual, or dual thermostatic cartridge. -HF rough valves feature blocked tub port – no additional plug needed when used in shower only application. Country of Manufacture: -United States. Dimensions: -2.5″ long. -1.34375″ diameter base. Overall Height – Top to Bottom: -4.5″. Overall Width – Side to Side: -4″. Overall Depth – Front to Back: -4.5″. Overall Product Weight: -1.57 lbs.

From the Manufacturer

A revolutionary system that allows easy changes to shower function, style, and appearance without altering the plumbing behind the wall – exclusively from Delta Faucet Company. Flexibility is the big benefit of the MultiChoice(R) Universal Valve. Once the MultiChoice(R) rough is installed, future shower function upgrades or style changes can easily be made without altering the plumbing behind the wall. This product is not intended for all uses, only high flow needs

Product Description

Built on the Moen M-PACT common valve system that allows you to make style updates any time without replacing plumbing and equipped with PosiTemp technology to maintain water temperature, the Moen Monticello PosiTemp Pressure Balancing Shower Valve delivers generous water flow. The four-port, cycle valve also allows you to predetermine the hottest temperature setting before installation, while its 1222 cartridge accommodates back-to-back installations. Featuring four ports and durable brass construction, this valve meets ASSE performance requirements and is backed by Moen’s Limited Lifetime Warranty against leaks, drips, and finish defects.

Amazon.com

The 2510 IPS valve (view larger).

Changing the look of your bathroom has never been faster and easier thanks to Moen’s M-Pact Common Valve System. The Monticello PosiTemp 1/2-inch IPS valve (model 2510) allows you to upgrade the trim style or swap out finishes on your fixtures without replacing the valves. So once the system is in place, you can change your decor as often as you want at any point in time — during construction process or years down the road. All changes can be made above the deck or in front of the wall, and it just takes few minutes. Best of all, the M-Pact Common Valve System is as easy to install as a standard valve.

The Monticello 2510 features a PosiTemp pressure-balancing control valve to help maintain water temperature in the shower, brass construction, 1/2-inch IPS connection type, and four ports. The 1222 cartridge accommodates back-to-back installations. This valve meets ASSE performance requirements.

What Sets Moen Apart?

From a variety of styles designed to complement today’s decors to faucets that perfectly balance your water pressure, Moen sets the standard for exceptional beauty and reliable, innovative design. Additionally, all Moen products come with a Limited Lifetime Warranty against leaks, drips and finish defects.

What’s in the Box

Moen 2510 Monticello PosiTemp 1/2-inch IPS valve; installation instructions

Moen 2510 1/2″ IPS Posi-Temp Rough-In Valve

At a Glance

• Moen M-Pact common valve system allows you to easily update your faucet style in the future
• PosiTemp pressure-balancing valve maintains water pressure and controls temperature
• 1/2-inch IPS connection with four ports
• Brass construction
• Limited lifetime warranty

See all Product description

Conclusion

By our suggestions above, we hope that you can found hot water mixing valve pex for you.Please don’t forget to share your experience by comment in this post. Thank you!

1. Operating pressure: 0.05 – 1.0 Mpa2. Theoretic pressure: 0.1 – 0.5 Mpa If the pressures over 0.5 Mpa, please installation a relief pipe. 3. Cold water supply: 5 – 29 ℃4. Hot water supply: 50 – 80 ℃5. Adjustable temperature range: 20 – 50 ℃6. The most comfortable temperature: 38 ℃ Under 0.3Mpa, cold water temperature within 18–23℃; hot water temperature within 60–80℃. 7. Safety test: If interrupted cold water supply within 5 seconds, the outflows reducing to 1.9L/Min automatically, the outflows less than or equal to150ml, the outflows temperature: less than or equal to 49 ℃.8. Life test: Testing under EN817, GB/T18145-2000 (over 70.000 cycles), Testing under CSA B125-98 ASSE 1016 (over 10.000 cycles).9. Sensitivity test: If inlet water temperature is constant, and the pressure in changeable about 20%, the outflows temperature changes less than or equal to 2℃; If inlet water pressure is constant and hot water temperature changes in 50-80℃, cold water changes in 5-29℃ then the outflows temperature changes less than or equal to 2℃.10. Applicable Standards：CSA B125-98 ASSE 1016 EN1111 AS-4032.111. The water supply pressure impacts on outflows temperature: Please read the following chart (Fig.1).

Product Description

R10000-UNBX

From the Manufacturer

A revolutionary system that allows easy changes to shower function, style, and appearance without altering the plumbing behind the wall-exclusively from Delta Faucet Company.

Product Description

R10000-UNBXHF Features: -Universal mount. -For use with showers only. This valve does not have an outlet for tubs.. -Drain Assembly Included: No. -Multi choice universal valve body only – accepts single, dual, or dual thermostatic cartridge. -HF rough valves feature blocked tub port – no additional plug needed when used in shower only application. Country of Manufacture: -United States. Dimensions: -2.5″ long. -1.34375″ diameter base. Overall Height – Top to Bottom: -4.5″. Overall Width – Side to Side: -4″. Overall Depth – Front to Back: -4.5″. Overall Product Weight: -1.57 lbs.

From the Manufacturer

A revolutionary system that allows easy changes to shower function, style, and appearance without altering the plumbing behind the wall – exclusively from Delta Faucet Company. Flexibility is the big benefit of the MultiChoice(R) Universal Valve. Once the MultiChoice(R) rough is installed, future shower function upgrades or style changes can easily be made without altering the plumbing behind the wall. This product is not intended for all uses, only high flow needs

Product Description

Built on the Moen M-PACT common valve system that allows you to make style updates any time without replacing plumbing and equipped with PosiTemp technology to maintain water temperature, the Moen Monticello PosiTemp Pressure Balancing Shower Valve delivers generous water flow. The four-port, cycle valve also allows you to predetermine the hottest temperature setting before installation, while its 1222 cartridge accommodates back-to-back installations. Featuring four ports and durable brass construction, this valve meets ASSE performance requirements and is backed by Moen’s Limited Lifetime Warranty against leaks, drips, and finish defects.

Amazon.com

The 2510 IPS valve (view larger).

Changing the look of your bathroom has never been faster and easier thanks to Moen’s M-Pact Common Valve System. The Monticello PosiTemp 1/2-inch IPS valve (model 2510) allows you to upgrade the trim style or swap out finishes on your fixtures without replacing the valves. So once the system is in place, you can change your decor as often as you want at any point in time — during construction process or years down the road. All changes can be made above the deck or in front of the wall, and it just takes few minutes. Best of all, the M-Pact Common Valve System is as easy to install as a standard valve.

The Monticello 2510 features a PosiTemp pressure-balancing control valve to help maintain water temperature in the shower, brass construction, 1/2-inch IPS connection type, and four ports. The 1222 cartridge accommodates back-to-back installations. This valve meets ASSE performance requirements.

What Sets Moen Apart?

From a variety of styles designed to complement today’s decors to faucets that perfectly balance your water pressure, Moen sets the standard for exceptional beauty and reliable, innovative design. Additionally, all Moen products come with a Limited Lifetime Warranty against leaks, drips and finish defects.

What’s in the Box

Moen 2510 Monticello PosiTemp 1/2-inch IPS valve; installation instructions

Moen 2510 1/2″ IPS Posi-Temp Rough-In Valve

At a Glance

• Moen M-Pact common valve system allows you to easily update your faucet style in the future
• PosiTemp pressure-balancing valve maintains water pressure and controls temperature
• 1/2-inch IPS connection with four ports
• Brass construction
• Limited lifetime warranty

See all Product description

SPECIFICATIONS
-Body Material: High Quality Brass
-Cartridge: Shape Memory Alloy (SMA), precise control and durable
-Connection: 1/2″ male straight threads
-Inlet Cold Water Temprature Requirement: 34-84°F/1-29°C
-Inlet Hot Water Temprature Requirement: 113-210°F/45-99°C
-Outlet Water Temprature: 68-119 °F/20-48°C
-Notice: Press Red Button if you need water higher than 100°F or 38°C
Package Includes
1x Thermostatic Mixing Valve
About KES
Founded in 1996, KES is a professional manufacturer in kitchen and bathroom industry. We strive to provide industry-leading quality, affordable products to customers worldwide.
– ISO9001 certified quality management system
– Socially responsible company, BSCI compliant
– Original designs under global patent protection
– Served millions of users from Europe, North America and Asia
– Walmart, Home Depot trusted supplier
– ISO9001 certified quality management system

Product Description

Every day around the world, Sloan products connect the systems that manage our planet’s most precious resource. As the world’s leading manufacturer of commercial plumbing systems, they’ve spent more than a century pioneering smart, water-saving restroom solutions that are built to last a lifetime.

From the Manufacturer

Regardless of your requirements, Sloan offers a variety of solutions to meet your water conservation and restroom needs. For below deck installations with built-in check valves.

Conclusion

By our suggestions above, we hope that you can found hot water mixing valve pex for you.Please don’t forget to share your experience by comment in this post. Thank you!