minmommy 
Nowadays, there are so many products of homebrew cooling coil in the market and you are wondering to choose a best one. You have searched for homebrew cooling coil in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings homebrew cooling coil which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
COLDBREAK 12.5′ Wort Chiller, 3/8", 100% Pure USA Copper, 8′ Vinyl Tubing, Heavy-Duty Garden Hose Fitting, Homebrewing
- 12. 5-foot kitchen copper worth chiller. Designed for 2-3 gallon batches (brewing kits)
- Made in Michigan with 100% pure 3/8-inch OD USA Copper tubing
- 8 feet of vinyl tubing – (2) 4-foot lengths
- Strong stainless steel hose clamps
- Heavy-duty lead free female garden hose fitting (USA made)
- 6. 75-Inch coil diameter 3-inch coil height 13. 5-Inch inlet/outlet height
- TEST BEFORE USE (EVERY TIME) – Hose clamps need to be checked for leaks before each use. Tightening the hose clamps while the vinyl tubing is warm will create a tight, leak free seal.
NY Brew Supply W3850-CV Super Efficient 3/8 x 50′ Copper Wort Chiller
Inkbird ITC-308 Max.1200W Heater, Cool Device Temperature Controller, Carboy, Homebrew, Fermenter, Greenhouse Terrarium Temp. Control
- [Convenient Design] Plug and play design, easy to use. Support °C/°F display.
- [Dual Relay Output] Be able to connect with refrigeration and heating equipment at the same time.
- [Dual Display Window] Be able to display measured temperature and set temperature at the same time.
- [Buzzer Alarm] High and low temperature alarms are available when the temperature is over or the sensor is with issue.
- [Warranty & Safe] Warranty: 1 year. Maximum output load: 1100W(110V). It is with temperature calibration and compressor delay which can protect your refrigeration.
Specification:
Temperature Control Range: -50~99°C / -58~210°F
Temperature Resolution: 0.1°C / 0.1°F Temperature Accuracy: ±1°C (-50~70°C) / ±1°F (-50~160°F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Body Dimension: 140x68x33mm (5.5×2.7×1.3inch)
Socket Dimension: 85x42x24mm (3.3×1.7x1inch)
Ambient Temperature: -30~75°C / -22~167°F
Storage Temperature: -20~60°C / -4~140°F
Humidity: 20~85% (No Condensate)
Warranty: 1 Year
Package Included:
1x ITC-308 Temperature Controller
1x Manual
Fermentation Temperature Control Kit (#7 Stopper)
- MAKE GREAT BEER, WINE & LARGE-BATCH KOMBUCHA! This kit has everything you need to have precise heating control of your fermentation temperature. It makes all the difference when trying to make great homebrew.
- HEATING AND COOLING capable temperature controller allows for easy conversion from controlled heating to controlled cooling for fermentation. Just switch out the included heater for a cooling device! (Cooling device not included)
- ALL COMPONENTS FIT YOUR STANDARD GLASS CARBOY. This kit includes a fermentation heater, temperature controller, and #7 stopper thermowell. BONUS: 3 piece airlock included
- ELIMINATE SANITATION ISSUES: Includes a thermowell which allows the probe to be in the wort without risking contamination. The #7 stopper fits standard glass carboys and includes a hole for a standard airlock.
- EASY TO USE. Attach your heater with electrical tape, set your temp, and you are ready to make great beer, wine, or Kombucha. Carboy not included.
The Temperature Control Kit from The Weekend Brewer is all you will ever need to have a perfectly fermented homebrew or kombucha. Includes 3 piece airlock, heat wrap, heating and cooling temperature controller, and #7 silicone thermowell for glass carboys. Carboy not included.
MAX PC Silver Kill Coil Strip 99.9% Pure Fine Silver For Inhibiting Organic Growth In Liquid Cooling
- >
- 99.9% Pure USA Sourced Fine Silver, Will NOT Corrode Like Other Silver Coils
- Dimensions (Silver Strip): 3.2mm x 0.42mm x 76mm (Over 550mm3 Surface Area)
- Silver Coil Is Highly Malleable And Ready To Be Formed By The User For Their Specific Use
- Each Coil Is Acid Cleaned, Triple Rinsed, And Packaged In An Airtight Container To Minimize Oxidation And Impurities
- Silver Is An Exceptional Antibiotic And Algaecide, Perfect For Inhibiting Growth In PC Water Cooling Loops
Once placed in the water the silver will require 7-10 days to become effective.
Conclusion
By our suggestions above, we hope that you can found homebrew cooling coil for you.Please don’t forget to share your experience by comment in this post. Thank you!
