Best Heating Turtle Tank

Specification

Material: PVC 
Power:14W 
Color: Black 
Plug Style: US Plug 
Voltage: 110V 
Size:11 inch × 11 inch 
Regulating Range: 0-35 Degree 
Temperature Range: 85°F – 130°F
Feature: Easy to clean, convenient to use,low energy. 
Suitable for Turtle, Snakes, Lizard, Gecko, Spider, Small mammals, etc.
The heat to excellent temperature for the seeds to germination quickly,wonderful for greenhouse environments.Improve seed germination and increase plants survival rate.

Kindly Reminder

The reptile heater mat is slightly waterproof, do not immerse it in water or long-term in high-temperature environment, so as not to cause electrical short-circuit and burn hazards.
As a safety precaution it is best to provide some space for air movement. Or put it inside tank with a layer sand/bark pieces to avoid direct touch and heat dissipation.

Package include:
1 x Reptile Heat Pad/ Mat

Two fixtures in one for maximum convenience! The dual fixture allows for one Basking Spot Lamp or 100 W Power Sun UV Lamp and one Nightlight Heat Lamp.

Give your pet the extra heat it needs. PeSandy heat mat’s durable construction provides uniform, evenly distributed heat. Easy to use and safe for all reptiles and amphibians. For use outside your pet’s enclosure. It can be mounted under or on side of your pet’s enclosure.

Feature
– Regulating power switch;
– Low power consumption;
– Enclosed circuit, leak-proof;
– Uniform heat dissipation, waterproof;
– Safe to use, won’t hurt your lovely pet;
– Pad can be used under a tank or vivarium;
– Suitable for tortoise, snakes, lizard, gecko, Hermit Crab, turtle, spider, insect breeding, and other amphibians that requires belly heat;

Specification
– Material: PET;
– Weight: 7W – 100g/ 3.52oz, 14W – 135g/ 4.76oz, 20W – 165g/ 5.82oz;
– Color: Black;
– Plug Style: US Plug;
– Voltage Range: 100v- 120v;
– Regulating Range: 0-35 Degree;
-Size:
7W – 28 x 15cm/ 11 x 6 inches;
14W – 28 x 28cm/ 11 x 11 inches;
20W – 42 x 28cm/ 16.5 x 11 inches;

Kindly Reminder
1. Highly recommend using the PeSandy terrarium heating pad with a thermostat. Or use a temp gun and check the temps to ensure correct temps.
2. The reptile heater mat is slightly waterproof, do not immerse it in water or long-term in high-temperature environment, so as not to cause electrical short-circuit and burn hazards.

Package include
1 x Adjustable Reptile Heating Pad(US Plug).

Now you can set the mood for your pet with Fluker’s clamp lamp with dimmer. Dimmer switch controls the light and heat output of incandesent bulbs and ceramic heat emitters. This allows you to adjust the temperature of your pet’s enclosure without buying a new bulb. This dome lamp is made of heavy gauge painted aluminum. Ceramic socket can be used with incandescent bulbs, ceramic heat emitters, and compact fluorescent bulbs. **Note: Dimming function does not work with compact fluorescent bulbs. To use this bulb, the dimmer switch must be completely turned on**

1. This heating pad is specifically designed to be used on standard glass terrarium for reptiles, amphibian, small animals, or plant terrarium.
2. Provides uniform, evenly distributed heat; Easy to use and safe for all reptiles and amphibians.
3. It can be mounted under or on side of your pet’s enclosure.
4. Suitable for tortoise, snakes, lizard, gecko, spider, frog, scorpion, crawler, small mammals, etc.

Note:
The reptile heater mat is slightly waterproof, do not immerse it in water or long-term in high-temperature environment, so as not to cause electrical short-circuit and burn hazards.

Specification:
Material: PET
Power: AC
Voltage Range: 100v- 120v
Rated power: 14W
Regulating Range: 0-35 Degree
Size: 28x28cm/ 11x11inch

Package include:
1 x Reptile Heat Mat

Operation Introduction:

 This type of product is with simple adjusting switch for constant temperature from 0℃ to 35℃ (if precise temperature is necessary, please use it in collocation with thermometers), which is proper in conducting heat source for reptiles (gecko, hermit crab, spider, scorpion, hamster, lizard, snail, horned frog, turtle, pet snake, etc), amphibians and varieties of arthropods.

1. Assisting in the temperature adjustment for a safe and balanced temperature distribution. Low power consumption, appropriate for those animals that tend to hang themselves or cling to the wall or the ones using sun-heated surfaces (e.g. Twigs, desert, woods) as the heat conductors. The bottom heater simulates such situations in heating its own bottom, but it’s noteworthy that cool enough places shall be preserved for the animals to choose when it’s necessary to adjust the heat by themselves.

2. Safe and durable! There is no possibility that your precious will be shocked or burned. When using, it is advisable to put some newspaper beneath the heating pad, or to put some bark chippings or the like that can keep warm and wet above the heating pat, so that the heat can be provided upward exclusively, and thereby achieving the optimal effect of the heating pad without any heat running-off. It is common that there are a few scratches on the pad surface, which does not affect ordinary use of it.

3. The product is water-proof and moisture-resistant, but it’s inadvisable to put it into water directly! It’s advisable to dry or clean the product when its surface gets wet or dirty!

The iPower reptile heating pad is specially designed to be used on standard glass terrarium for reptile, amphibian, small animal, or plant terrariums. Compared with other general heat pads on the market, our heat pad includes a new proprietary heating film technology that allows the pad to reach desired temperatures faster.

Also included is the new and improved digital heat mat controller. The new iPower heat mat thermostat is digital for greater accuracy. It provides constant customized temp for fermentation, reptiles or brewing.

Specifications

1 – Heat Mat (8″x 12″ Watt: 16W) / 1 – Digital Thermostat (120 Volts / 8.3 Amps Max /60 HZ)

S : 4″x7″ 4 watt — 1-5 Gallon
M : 6″x8″ 8 watt — 10-20 Gallon
L : 8″x12″ 16 watt — 30-40 Gallon
XL : 8″x18″ 24 watt — 50-60 Gallon

Improved Design:
New heating film and insulation increases overall heat transfer across the mat. Reach desired temperatures within minutes.

3M Adhesive Paper:
Provides a strong grip to the contact area. The heat mat stays exactly where you want it.

Energy Efficient:
Reach desired temperatures in a shorter amount of time while consuming less power than other heat mat products.

About Our Digital Thermostat:
Temperature can be set from within a wide range, 40°F – 108°F (5-42°C)
The controller is compatible with most heat mats and ready to plug into North American outlets
Delivers excellent results for seedling germination, plant growth, reptile, or brewing
The thermostat controller is rigorously tested to ensure the safety of your plants, pets and DIY projects.

Conclusion

By our suggestions above, we hope that you can found heating turtle tank for you.Please don’t forget to share your experience by comment in this post. Thank you!