minmommy 
Nowadays, there are so many products of heating coil for roof in the market and you are wondering to choose a best one. You have searched for heating coil for roof in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings heating coil for roof which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Prime Wire & Cable RHC1000W200 ROOF & GUTTER DE-ICING KIT ROOF HEATING CABLE
- 200 ft. Black roof & gutter de-icing kit, 1000 watts, 2 ft. 18/3 SJTW blue power cord
- Promotes water flow in gutters and downspouts
- Helps prevent water damage caused by ice dams
- Includes roof cable, shingle clips, spacers, owner’s manual & labeling for breaker & on/off switch
Roof and gutter De-Icing cables help prevent costly damage from ice Dam formation by preventing freezing of un-insulated roof eaves, Valleys, gutters and downspouts, and allows water to drain freely. This product is for use on inclined, tab-shingle roofs and in downspouts and gutters only. To ensure water can flow to the ground, cable should be installed on Unheated portions of the roof (usually the overhang) as well as in Valleys, gutter and downspouts. Roof and gutter De-Icing kits are available in lengths from 30 ft to 240 ft. These products are found as De-Icing and snow melting sets primarily in northern markets beginning in early October.
Heat it HIRD 20 feet Roof Gutter De-Icing Cable
- Designed to prevent ice buildup, known as ice dams, from forming on roofs and in gutters and downspouts. Protect your roof from damage and leaking, keep the water flowing in gutter & downspouts. When properly installed and operated, this product creates a path for melted snow or ice (“melt water”) to drain from the roof to the ground.
- Used for Metal or plastic gutters/downspouts, Inclined roofs Roofs with noncombustible shingles (Ex.: asphalt shingles) that meet national building codes. Different lengths are available
- Suitable for most roof and gutter configurations. HIRD cable cannot be used on slate, stone, metal and ceramic roofs.
- Test the cable before installation. Uncoil the heat cable completely so it does not touch, cross over or overlap on itself. Do not plug in the cable until it has been completely uncoiled. Plug cable in, and in approximately few minutes, it should feel slightly warm to the touch. Then unplug the cable.
- Both CSA and ETL approved. 6 ft 18/3 cold lead with plug
- 5 watts/ft. Pre-assembled, ready to install, no maintenance required
- Easy instruction manual, clips and spacers are included.
- Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket. 100% screen rate with the Aluminum foil and tinned copper braid. More safe and more healthy. Three year limited warranty- If you are not completely satisfied with HEATIT heating cable, please don’t hesitate to contact us in any time.
What is the purpose of the heating cable?
The roof de-icing cable is designed to prevent ice buildup, known as ice dams, from forming on roofs and in gutters and downspouts. When properly installed and operated, this product creates a path for melted snow of ice (“melt water”) to drain from the roof to the ground.
Why you need to choose HIRD roof heating cable to protect your roof in the winter ?
HIRD roof heating cable was approved by both CSA and ETL. You can have more confidence on the product safety. Pre-assemble heating cable make installation easy for do-it-yourselfers with the included clips and spacers.
HIRD owned the aluminum foil and the tinned copper braid to make sure the 100% screen rate to make the product more healthy and more stable.
In the connection, HIRD take the industrial grade heat shrinkage tube technology to make the cable more durable.
How about the manufacturer?
The factory meet ISO9001 standard (audit by BV)in the production process and the company take a very strict requirement on the incoming material, production process control, finish good inspection etc. Advanced product structure engineering design, good raw material, strict production process, strict internal management plus many years maneuvering experience make HIRD more reliable.
This kit is only designed for use on:
Metal or plastic gutters/downspouts
Inclined roofs
Roofs with noncombustible shingles (Ex.: asphalt shingles) that meet national building codes
Do not use this kit on any other type of roof, gutter and downspout, including: Roofs with wooden shingles, Rubber or rubber membrane roofs, Composite (tar and gravel) roofs, Wooden gutters or downspouts, Flat roofs
HIRD cable cannot be used on slate, stone, metal and ceramic roofs.
These types of roofs require special installation or the use of a self-regulating cable.
HEATIT HIRD 80 feet 5 Watts Per Foot Roof & Gutter Snow De-Icing Cable
- Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket. 100% screen rate with the Aluminum foil and tinned copper braid. More safe and more healthy. Three year limited warranty- If you are not completely satisfied with HEATIT heating cable, please don’t hesitate to contact us in any time.
- Both CSA and ETL approved. 6 ft 18/3 cold lead with plug . Pre-assembled, ready to install, no maintenance required. Easy instruction manual, clips and spacers are included.
- Designed to prevent ice build up, known as ice dams, from forming on roofs and in gutters and downspouts. Protect your roof from damage and leaking, keep the water flowing in gutter & downspouts.
- Used for Metal or plastic gutters/downspouts, Inclined roofs Roofs with noncombustible shingles (Ex.: asphalt shingles) that meet national building codes. Different lengths are available
- Suitable for most roof and gutter configurations.
- Testing the cable before the installation.Uncoil the heat cable completely so it does not touch, cross over or overlap on itself. Do not plug in the cable until it has been completely uncoiled. Plug cable in, and in approximately 5 minutes, you should feel slightly warm to the touch. Then unplug the cable.
Similar items with 4 stars and above
Prime Wire & Cable RHC150W30 Roof & Gutter De-Icing Kit Roof Heating Cable
- 30 ft. Black roof & gutter de-icing kit, 150 watts, 2 ft. 18/3 SJTW blue power cord
- Promotes water flow in gutters and downspouts
- Helps prevent water damage caused by ice dams
- Includes roof cable, shingle clips, spacers, owner’s manual & labeling for breaker & on/off switch
- Total Outlet: 1
Roof and gutter De-Icing cables help prevent costly damage from ice Dam formation by preventing freezing of un-insulated roof eaves, Valleys, gutters and downspouts, and allows water to drain freely. This product is for use on inclined, tab-shingle roofs and in downspouts and gutters only. To ensure water can flow to the ground, cable should be installed on Unheated portions of the roof (usually the overhang) as well as in Valleys, gutter and downspouts. Roof and gutter De-Icing kits are available in lengths from 30 ft to 240 ft. These products are found as De-Icing and snow melting sets primarily in northern markets beginning in early October.
Grip Clip Heat Tape Pro for Ice Dam Prevention Heavy Duty – Self-Regulating – Plug-in Ready Heat Cable – 120V, 6 watts/FT (50 Feet + 10 Feet Cold Lead)
- AMERICAN SUPPORT: Knowledgeable, Minnesota-based company with expert support staff you can actually speak to about ice dam prevention. We are excited to help! Phone: 877-387-4218
- USES: For use on flat roofs, metal roofs, asphalt roofs, rubber roofs and more.
- HEAVY DUTY: Heat Tape Pro is a commercial-grade self-regulating heat cable that substantially outperforms cheap cables such as EasyHeat and FrostKing.
- WARRANTY: Best-in-Industry 5 year warranty – ETL Listed – WILL NOT short or burnout if cable is overlapped and can be used on flat roofs and metal roofs, unlike cheap cables.
- HEADS UP! Please don’t forget to order Radiant Solutions Company Roof Clips with this product – visit www.heattapecalculator.com for cable length and accessory recommendations.
Prime Wire & Cable RHC600W120 ROOF & GUTTER DE-ICING KIT ROOF HEATING CABLE
- 120 ft. Black roof & gutter de-icing kit, 600 watts, 2 ft. 18/3 SJTW blue power cord
- Promotes water flow in gutters and downspouts
- Helps prevent water damage caused by ice dams
- Includes roof cable, shingle clips, spacers, owner’s manual & labeling for breaker & on/off switch
Roof and gutter De-Icing cables help prevent costly damage from ice Dam formation by preventing freezing of un-insulated roof eaves, Valleys, gutters and downspouts, and allows water to drain freely. This product is for use on inclined, tab-shingle roofs and in downspouts and gutters only. To ensure water can flow to the ground, cable should be installed on Unheated portions of the roof (usually the overhang) as well as in Valleys, gutter and downspouts. Roof and gutter De-Icing kits are available in lengths from 30 ft to 240 ft. These products are found as De-Icing and snow melting sets primarily in northern markets beginning in early October.
Easy Heat ADKS-1000 200-Foot Roof Snow De-Icing Kit
- Snow de-icing cable prevents winter damage to roof, gutters, and downspouts
- Provides uninterrupted path for melting water to flow off roof
- Suitable for most roof and gutter configurations
- available in several lengths
- Easy to install
- no maintenance required. Includes 6 packages of clips
- Fixed resistance, pre-terminated. For residential applications
Product Description
Prevent winter damage to the roof, gutters, and downspouts with an Easy Heat ADKS Roof Snow De-Icing Kit. The simple yet effective design features a low-profile, black cable that snakes along outdoor surfaces and provides an uninterrupted path for melting water to flow without re-icing and forming dams. Suitable for almost any inclined roof and approved for both metal and plastic gutters, the cable is easy to install with the included clips and spacers and provides a handy service year in and year out with no maintenance required. It is also CSA Certified and UL Listed, provides 5 watts per foot and 120 VAC, and comes with a three-wire grounded plug and a 6-foot power cord. The cable is available in 30-, 60-, 80-, 100-, 120-, 160-, and 200-foot lengths to fit any sizing need; all mounting hardware is included.
From the Manufacturer
It’s not those big icicles that do the real damage, it’s the ice you don’t see that backs up in gutters and under shingles. When the ice melts it can really do a number on repair costs. Easy Heat ADKS roof de-icing cable prevents this water and ice damage by providing a clear path for melting water to flow off the roof. The versatile design adapts to most roof and gutter configurations. This product is intended for the sole use of preventing ice dams from forming on inclined roofs with tab shingles, in gutters and downspouts. This roof de-icing cable is not intended for use as a snow melting system to clear roof of ice and snow. This system can be installed with confidence that it will operate for years without requiring service. All components are made of the highest quality material and are tested during critical points in the manufacturing process.
HEATIT JHSF1 Self Regulating ROOF & Gutter DE-Icing Pre-Assembled Heating Cable 100-feet 120V
- HEATIT is registered Trademark by zhukeshi(We didn’t authorize other sellers in Amazon.com). Suitable for use on plastic and metal water pipes( including inlet pipe,drain pipe, sewer, palm tree frost protection etc). Industrial grade self regulating heating cable. The cable output will adjust automatically based on the ambient temperature at each point along the cable. No worry about the overheat risk. More Safe. Can be used by straight, spiral and overlap. More functional.
- Protect pipes up to 2 1/2” in diameter. For a better freeze protection, at least 1/2 inch thick or thicker insulation material is recommended, especially for extremely cold weather. If the ambient temperature is lower than -20°F(-29°C), please use 1” thick insulation material.
- ETL approved. 50 degrees F for pipe freeze protection.3 ft 18/3 cold lead with grounded plug.
- Roof deicing application: Can be used on flat roofs, metal roofs, asphalt roofs, rubber roofs, slate roofs, stone roofs, metal roofs, ceramic roofs, composite (tar and gravel) roofs and so on. Rated 10W/ft at 32°F (0°C) for roof deicing. For roof deicing application, you may need to buy clips and hangers separately. For the circuit breaker requirement especially for the cables which length is over 100ft, please check the listed picture.
- Testing the cable before the installation. Uncoil the cable, plug in the heating cable. Normally you can feel the slight warm on the heating cable in few minutes. Two year limited warranty – If you are not completely satisfied with HEATIT heating cable, please feel free to contact us in any time, we’ll try our best to solve your issue.
Similar items with 4 stars and above
RHS Snow Melting System, roof and valley snow melting mats, Sizes 5′ feet x 13" inches, Color black, UL components, 5 ft. mat melts 2" inches of snow per hour, buy factory direct, (5′ ft. x 13" in.)
- RHS Valley Heater roof snow and ice elimination systems are good looking and cost effective. They ensure that the house owner will not have the frustration, property damage, and costs associated with water damage caused by the inability of roofs to drain water during winter months.
- Melts 2 inches of snow per hour, UL listed components are made to sustain the most harsh environments. RHS Valley heaters have a complete waterproof system which serves for the most demanding environments including hazardous and non-hazardous areas, as well as areas where corrosives may be of concern. The valley heaters provides 40 watts per foot at 120 volt.
- Easy installation, valley heaters are 5 feet length (can be made in 8′, 10′, 15′, and any other size up to 50′ ft. for custom orders) roofing grommet screws included with the system are 100% waterproof and easy to insert on the valley heaters.
- No more climbing on a ladder to shovel your roof, RHS Valley Heaters go right over the problem areas on the valley, 6.5″ inches to one side and 6.5″ inches to the other side to completely melt the snow from the valley, just attach the grommet screws at the labeled locations to secure in place and relax, and watch RHS Valley Heaters get the job done.
- RHS Valley Heater System provides with the most proficient, highly scalable and eco-friendly snow melting solution. Our roof systems are offered for all types of applications, including new construction, remodeling, and existing roofs. Installing RHS Valley Heater Systems can increase the life of your roof in addition it will enhance the value of your home or commercial property.
What is an Ice dam? An ice dam is a blockage of ice that forms at the edge of a roof and prevents melting snow (water) from draining off the roof. The water that backs up behind the dam can leak into a home and cause damage to walls, ceilings, insulation, and other areas.
Preventing Ice Dams
RHS Valley Heater System is one of the best purchases homeowners, contractors, field workers could take against snow accumulation on the roof. Our system will completely clear the most problem areas (valleys) from snow and ice from your roof, without any hassle of using a roofing rake or even using hazardous chemicals like sodium chloride and rock salt that will damage your roof. Lower cost on electric bill compared to other systems, our highly efficient system only draws the right amount of energy to melt ice and snow off your roof, saving on your energy bill. Expand the life of your roof and reduce the risks of falls, injuries and other related ice and snow dangers by installing the best roof deicing system by RHS
Similar items with 4 stars and above
Xarex XGR Self Regulating Roof Gutter De-Icing Heating Cable 75ft – Pre-Assembled Heat Trace Tape for Ice Dam Prevention Electric Warmer Deicer Heater System Deicing Snow Melt Gutters Cables Tapes
- ✔️ HEATING CABLE EXPERTS’ PICKS! – Who made this Self-Regulating heating cable? We know that it looks similar with all the products that are sold on Amazon. But it all comes down to who made the cable. Xarex has set a whole new criterion of SR heating cables – researching to manufacturing, we take control of the entire SCM system ourselves for all of our products.
- ✔️ HERE’S HOW TO PICK THE RIGHT LENGTH OF XGR 120V! – All you need to know is the (A) length of your roof edge, (B) eave overhang(depth), (C) Total gutter length, (D) Total downspout length. Please refer to the fourth product image for an example or you can simply provide us (A)~(D) and we will help you pick the right XGR 120V.
- ✔️ MORE POWERFUL & MORE DURABLE – Trust our quality. Xarex is different from other models as it is not built with a heat shrinkable tube. What does this mean? It means that our product is assembled with an exclusive molding – assuring a width of 0.5’’ to resist flammability and deformation even in the harshest conditions.
- ✔️ 20 YEARS OF EXPERTISE & UL CERTIFIED TECHNOLOGY – Our SR heating cable has been approved officially by the UL. Our product is safe and excellent in performance. We guarantee it will protect your ROOF&GUTTER from freezing for a long time.
- ✔️ SELF-REGULATING CABLE ONLY – E&S TEC is the best manufacturer that has researched and developed self-regulating products. We have exported more than 100 million miles of our heating products worldwide. We provide not only commercial heating cables but also industrial and household use heating cables. Don’t miss out on this chance to purchase our WORLD CLASS HEAT TRACE CABLES!
Year End Sale 20% – 2019 December Only
XGR 120V Complete Kit: This package includes pre-assembled 9/13XGR Self-regulating Heating Cable, Warning Labels, Installation Manual, Roof Clips, Hanger Brackets and UV resistant cable ties. XGR cable is not an inexpensive product but rather a premium model in the self-regulating market with high quality material, which makes it FLEXIBLE and RUGGED at the same time to provide maximum heat transfer and pleasant installation experience. It is also 0.5-inch-wide with carefully extruded jackets to eliminate possible hot spots, and power output will get up to 9W/ft(117ft or longer models) or 13W/ft(100ft or shorter models) in SNOW/ICE at 32 degree Fahrenheit which increases even more as it gets colder in winter due to conductive core’s PTC self-regulating technology. As one of the few direct manufacturers in the world, we are confident that our products will deliver the quality and the satisfaction homeowners will enjoy. The cable has especially endured various types of rigorous flammability and waterproof tests by UL, which is the ultimate factor for safety and service life of outdoor deicing cable. This package is a DIY product that homeowners will easily install upon reading the installation manual. Upon proper installation, our 5 years limited warranty will not be necessary as it will last for decades. If you have any troubles with the application or any defects with the cable upon receipt, please contact us. We will take care of your problems right away.
Similar items with 4 stars and above
Conclusion
By our suggestions above, we hope that you can found heating coil for roof for you.Please don’t forget to share your experience by comment in this post. Thank you!
