Best Heating Ceramic Tiles

WarmWalk electric radiant floor heating mats are designed for fast and easy installation under ceramic tile, marble, porcelain and stone. WarmWalk heating mats are particularly advantageous compared to labor intensive hydronic and electric cable systems where water pipes or electric cables must be spaced by hand across the whole floor. What’s more, WarmWalk eliminates electro-magnetic field (EMF) so there is no worry about interference with electric devices. WarmWalk is made in the USA with the most advanced technology available. It is even UL listed for installation in showers!

WarmWalk saves installation cost. Most radiant floor heating systems must be embedded in thick-set cement mortar before laying the finished floor. Not WarmWalk! The 1/8” thin heating cable minimizes floor height and the amount of cement used!

WarmWalk reduces installation time. Some electric radiant floor heating systems must be expensively custom fit. Other systems come in static lengths and widths that may not fit the floor dimension, causing cold spots. Still other systems require complicated electrical connections. Not WarmWalk! WarmWalk’s standard sized mats are stocked for sale and easy on-site fitment to any floor. WarmWalk’s heating cable is factory spaced on rolls of fiberglass mesh. Simply roll out the mats and cut the mesh to turn WarmWalk in any direction to fit the floor. No on-site splice connections or special tools are necessary. The factory-attached, hermetically sealed lead wires connect to standard household Voltage. Both 120V and 240V systems are available.

WarmWalk installs on virtually any subfloor and under any floor covering. WarmWalk can meet the heating demands of almost any floor. Besides being ideally suited for all types of tile, marble, porcelain and stone floors, WarmWalk can be installed under carpet, vinyl, laminate and wood floors when imbedded in a layer of self-leveling cement.

Perfect for:Floor Heating in kitchens and bathrooms to make tile floors warm and comfortable.New construction or when remodeling.Heating or supplemental heating mats of rooms, basements or room additions.Heated floors of tile, marble, porcelain and stone floors.Can be installed under carpet, vinyl, laminate and wood floors when embedded in self-leveling cement. Benefits:Provides all the comfort and health advantages of electric radiant heating without noisy fans, drafts, blowing dust or allergens.Energy Saving up to 40% compared to convective systems.Fast and easy-to-install. Self-adheres to the subfloor – no need to staple or glue.
Installation:Combine multiple same-Voltage heating mats as needed to fit the heated area (up to 15 Amp load on one thermostat).Simply roll out and cut mesh to turn the mat to fit the heated area. (DO NOT cut heating cable).Lay tile as usual by troweling thin-set mortar over the heating mat. Openings in the mesh allow mortar to securely adhere the mat to the subfloor.Alternatively, skim coat or self-level over the mat and lay tile in a second step. Features:Factory-spaced heating cable on mesh reduces installation time.Factory-attached, water-proof lead wires connect to the thermostat and standard household Voltage.Mesh strengthens tile floors as an anti-fracture membrane.Designed to eliminate electro-magnetic field (EMF).Intertek Listed (UL-compliant) for the U.S. and Canada.

Turn those chilly tile floors into warm and cozy with HeatTech electric radiant floor heating system and enjoy the benefits of quiet operation, affordable cost and unmatched comfort levels of radiant heated floors. Electric floor heating offers a healthier alternative to traditional heating systems such as forced air and baseboard/radiators, both of which dry the air and require purchase, installation and maintenance of expensive parts and equipment.

What’s included:
HeatTech™ Electric Radiant Floor Heating Mat (HTMAT);
OJ Microline UDG-4999 Thermostat with Class A GFCI (for wet/dry locations – incl. bathrooms, kitchens, etc.), 7-day programmable;
OJ Floor Sensor with 15ft lead wire;
Installation Manual.

Applications:
Tile (Porcelain/Ceramic/Glass), Stone (Granite/Slate/Marble/Pebble) floors;
Bathrooms, Kitchens, Mudrooms, etc.;
Supplementary or Whole-house heating;
Residential homes and apartment buildings;
New construction and retrofits.

HeatTech™ System Benefits:
HeatTech floor heating mats are UL listed for USA (meet and exceed highest electrical safety standards);
HeatTech mats feature a sticky/adhesive backing for easy adhering to variety of surfaces, making installation much faster and easier;
Our heating cable is only 1/8″ thick and will not raise the floors significantly;
Cable spaced at 3″ apart for optimal performance and outputs as much as 41 BTU’s per sqft, making the system suitable for whole-house heating applications;
A single 10ft long cold lead means no extra wiring or drilling;
Does not dry air like steam radiators and forced air heating;
Zero Electromagnetic Field;
Quiet operation.

80sqft Electric Floor Heating Mat Kit with Thermostat & Alarmer Set

Application

New construction and retrofits;

Residential homes and apartment buildings;

Bathrooms, Kitchens, Saunas, Mud Rooms;

Ceramic or Porcelain Tile, Stone, Granite and Marble Floors;

Laminate, Engineered Wood, Vinyl Floors and many others.

Feature

Equip with settable thermostat and alarmer.

Premium floor heating mat, 80sq.ft size.

Quick & easier to install with self-adhesive mesh surface.

Compatible with floor types: tile, stone, marble, granite, laminate, wood floors etc.

Processed with PEP insulation+aluminum cable ground connection+PVC protective cover to ensure safe use.

Perfect for home & commercial use, like: living room, hotel.

Pass UL, CE, VDE, RoHS tests.

Thermostat Features

1. Display time(H/M/S/W), room temperature(℉), room humidity, floor heating temperature, lock.

2. Mode: Manual Control; Preset Function(User can set 6 working period and corresponding temperature everyday, then thermostat will work according to the set).

3. Settable time: H/M/S and week.

4. Over & Low temperature protection.

5. Equip with accurate sensor.

Floor Heating Mat Parameters

Power Supply: 100-120V

Power Output: 12w/sq.ft

Min. Bending Radius: 30mm

Min. Cable Spacing: 8cm

Max. Exposure Temperature: 90℃

Min. Install Temperature: 5℃

Cold Lead Cable: 16-20AWG

Digital Thermostat Parameters

Power Supply: 100-240V

Load Current: GA: 2A; GB: 16A

Power Consumption: ＜1.5W

Set Point Range: 5-35℃

Package List

1 X 80sq.ft Floor Heating Mat

1 X Settable Thermostat

1 X Alarmer

1 X User Manual

Conclusion

By our suggestions above, we hope that you can found heating ceramic tiles for you.Please don’t forget to share your experience by comment in this post. Thank you!