minmommy 
Nowadays, there are so many products of fuel tank filter element water block in the market and you are wondering to choose a best one. You have searched for fuel tank filter element water block in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings fuel tank filter element water block which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
42,899 Reviews Scanned
GOLDENROD (496-5) Fuel Tank Filter Replacement Water-Block Element – 2 Filter
Water-absorbing bowl fuel tank filter replacement element. Sold as 2 pack.
Similar items with 4 stars and above
GOLDENROD (596-3/4) Canister Water-Block Fuel Tank Filter with 3/4" NPT Top Cap
- Water-Block filter removes water from gasoline and diesel fuel
- Water-absorbing polymers trap water, restricting fuel flow when it is time to replace the canister
- Removes microscopic particles (10 microns) of rust, sand, dirt, scale, and lint
- Zinc die-cast top cap with 3/4″ NPT pipe fittings
- Entire canister can be thrown away and replaced
- Maximum recommended flow rate of 25 GPM
- working pressure up to 50 psi
U.S. made water-absorbing canister fuel tank filter with 3/4″ NPT top cap.
GOLDENROD 496-3/4 WATER-BLOCK FILTER (56591) Bowl Fuel Tank Filter with 3/4" NPT Top Cap
- Removes water from gasoline & diesel fuel,
- 17 micron filtration,
- Water absorbing polymers trap water
- Restricting fuel flow when it is time to replace the element,
- May be used by itself or in combination with a #495 fuel filter for added protection against microscopic particle contamination
- Water-Block filter removes water from gasoline and diesel fuel
- Water-absorbing polymers trap water, restricting fuel flow when it is time to replace the element
- Removes microscopic particles (17 microns) of rust, sand, dirt, scale, and lint
- Zinc die-cast top cap with 3/4″ NPT pipe fittings
- See-Through bowl allows for visual monitoring of fuel flow
- Maximum recommended flow rate of 25 GPM
- working pressure up to 150 psi
WATER-BLOCK filter removes water from gasoline and diesel fuel. Water-absorbing polymers trap water, restricting fuel flow when it is time to replace the element. Also removes microscopic particles (17 microns) of rust, sand, dirt, scale and lint. Also compatible with biodiesel blends up to 20%. Zinc die-cast top cap with 3/4 inch NPT pipe fittings. See-Thru bowl allows for visual monitoring of fuel flow. Maximum recommended flow rate is 25 gpm. Gravity flow rate is approximately 5 gpm with a 24 inch head. Working pressure up to 150 psi.
GOLDENROD 496 Automotive Accessories
- Auto & Truck Maintenance
- Country of manufacture: United States
- Manufacturer: GOLDENROD
- Zinc die-cast top cap with 1″ NPT pipe fittings
- For use with GOLDENROD See Thru bowl fuel tank filter models 495, 495-1, 496, and 496-1 only
- Not for use with biodiesel blends over 20 percent or GOLDENROD bowl fuel tank filter models 497 or 497-1
- Made in the U.S.A.
Bowl fuel tank filter top cap with 1″ NPT pipe fittings for standard and water-absorbing GOLDENROD bowl fuel tank filters.
Lifesmells 496-3/4 Water-Block (56591) Bowl Fuel Tank Filter with 1" NPT Top Cap
- Removes water from gasoline & diesel fuel,17 micron filtration,Water absorbing polymers trap water
- Restricting fuel flow when it is time to replace the element.May be used by itself or in combination with a #495 fuel filter for added protection against microscopic particle contamination
- Water-Block filter removes water from gasoline and diesel fuel
- Water-absorbing polymers trap water, restricting fuel flow when it is time to replace the element.Removes microscopic particles (17 microns) of rust, sand, dirt, scale, and lint Zinc die-cast top cap with 1″ NPT pipe fittings
- See-Through bowl allows for visual monitoring of fuel flow.Maximum recommended flow rate of 25 GPM
- working pressure up to 150 psi Water-Block filter removes water from gasoline and diesel fuel
- Water-absorbing polymers trap water, restricting fuel flow when it is time to replace the element
- Removes microscopic particles (17 microns) of rust, sand, dirt, scale, and lint Zinc die-cast top cap with 3/4″ NPT pipe fittings.See-Through bowl allows for visual monitoring of fuel flow.Maximum recommended flow rate of 25 GPM
- working pressure up to 150 psi
iFJF 496-5 Fuel Tank Filter Element for Diesel and Gasoline Absorb Water 17 Micron with Galvanized Iron Sheet
- Fitment:For only use with 496 and 496-3/4 fuel tank filter.
- Micron rate:17 micron,remove particles such as rust,sand,dirt and water.
- Galvanized iron sheet:This design can effectively prevent the filter element from being destroyed or deformed by pressure.
- How often to change a new one:When element absorbs its capacity of water (approximately 1/2 cup) the fuel flow will slow down.Then you need to change it.
- Note:This filter will not absorb water from fuel containing alcohol.
Fitment:
use with 496 and 496-3/4″ fuel tank filter
Micron rate:
17 micron with galvanized iron sheet
How often to change a new one:
When element absorbs its capacity of water (approximately 1/2 cup) the fuel flow will slow down.Then you need to change it
Note:
This filter will not absorb water from fuel containing alcohol
Goldenrod Replacement Fuel Filter Element – Fits Item# 1703(470-5)
- For Goldenrod Bowl fuel tank filter standard models 495 and 495-3/4 only
- Made in the U.S.A
- Standard filter for use with common fuels including regular and unleaded gasoline, diesel fuel, fuel oil,
- For GOLDENROD bowl fuel tank filter standard models 495 and 495-3/4 only
- 10 micron filtration
- Standard filter for use with common fuels including regular and unleaded gasoline, diesel fuel, fuel oil, and related additives including methyl, ethyl, and isopropyl alcohol (also compatible with biodiesel blends up to 20 percent)
- Made in the U.S.A.
Standard bowl fuel tank filter replacement element.
GOLDENROD (495-4) Fuel Tank Filter Replacement Bowl
- For GOLDENROD See-Through bowl fuel tank filter models 495, 495-3/4, 496, 496-3/4, 497, and 497-3/4
- See-Thru bowl allows for visual monitoring of fuel flow
- Alcohol-resistant polymer material stands up to harsh weather conditions
- Easy-to-use sediment drain valve
- To prevent the bowl from cracking when changing element, use GOLDENROD fuel tank filter wrench
U.S. made GOLDENROD fuel tank filter replacement bowl and gasket.
Fuel Tank Filter Element Water Block Replacement Goldenrod USA Made Farmer Bob’s Parts 496-5
Fuel Type: Diesel, Gasoline Includes: Water Absorbing Media Element Height: 4-15/16″ For Use With: Mfr. No. 496 Micron Rating: 15 Description/Special Features: 3 Microns Filter Design: Spin-On Width: 3″ Length: 5″ Item: Fuel Filter Outside Dia.: 3″ Country of Origin (subject to change): United States
Conclusion
By our suggestions above, we hope that you can found fuel tank filter element water block for you.Please don’t forget to share your experience by comment in this post. Thank you!
