minmommy 
Nowadays, there are so many products of flat heating tape in the market and you are wondering to choose a best one. You have searched for flat heating tape in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings flat heating tape which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
WRAP-ON Pipe Heating Cable – 30-Feet, 120 Volt, Built-in Thermostat, Low Wattage – 31030
- BUILT-IN THERMOSTAT – Turns the cable on at 38 degrees F and prevents frozen pipes to -50 degrees F – Simply wrap on, insulate and plug in. Insulation sold separately.
- PRESS-TO-TEST BUTTON – Exclusive feature to test cable before or after installation.
- ENERGY EFFICIENT – Uses up to 65% less energy at 2 watts per foot vs other cables at 7 watts per foot.
- USE ON ALL RIGID PIPES – PVC, CPVC, copper and metal pipes.
- MADE IN THE USA.
Prevents frozen water pipes to –50F. Simply wrap on, insulate and plug in. Engineered for use on metal and rigid plastic pipes. Uses an exclusive Press-To-Test button so you can test the cable before installing. A built-in thermostat turns the cable on at 38F. Proven low-wattage design uses up to 65 percent less energy at 2 watts a foot vs. other cables at 7 watts a foot, and protects to –50F. An exclusive power sensor light glows when the thermostat is closed. Each package contains one ready-to-install pipe heating cable along with installation instructions. To install, you will also need PVC/electrical tape, fiberglass pipe insulation, a tape measure and eye protection. Warning: This cable has been designed for the sole purpose of preventing metal and rigid plastic water filled lines from freezing. DO NOT use this product on fuel lines, drain lines, hoses or buried pipes. Fiberglass pipe wrap is required to complete the installation. Read and follow all instructions. Cables are available in various lengths. See chart to determine the length required for your application.
3M 3311 Silver Aluminum Foil Tape – 2 in. x 5 yd. Vapor Resistant Rubber Adhesive Foil Tape Roll. Adhesives and Tapes
- Adhesive Tape: this foil tape with aggressive rubber adhesive sticks well to most surfaces. The vapor shielding tape also adheres to irregular surfaces, irrespective of the weather conditions
- Applications: the silver aluminum tape can be used for shielding, patching, seaming, and sealing to protect the materials from moisture, heat, odor, and chemical transmission. It is ideal for use in repair tasks
- Temperature Friendly: the odor resistant tape meets American UL-723 standards for flame spread and smoke. The rubber adhesive tape dissipates excess heat and ensures heating and cooling efficiency of sensitive materials
- Multipurpose Tape: this adhesive foil tape works suitably well in general, commercial, and industrial applications. It can be used for aluminum seams and joints, sheet metals, fibrous and metal ducts, and aluminum backed duct boards
- Specifications: this silver foil tape measures 2 in. in width, 5 yd. in length, and weighs 0.32 oz. The paper-lined tape can sustain -10 deg. – 180 deg. temperature
3M Silver Tape is backed with aluminum foil and rubber adhesive for sticking perfectly to the surfaces. The aluminum backed tape features a high-tack, pressure sensitive adhesive that bonds equally with regular, irregular, smooth and powder-painted surfaces. This silver tape is ideally used for patching and seaming tears in sheet metals, metal ducts, aluminum backed fiberglass and thermal insulation systems. Insulation tape has high heat reflectivity and thermal conductivity features to protect heat-sensitive apparatus from vermin, high and low temperatures, moisture, and fire smoke. The 5 yd. long and 2 in. wide heat-reflective tape can be used in all weather conditions.
Prime Wire & Cable RHC1000W200 ROOF & GUTTER DE-ICING KIT ROOF HEATING CABLE
- 200 ft. Black roof & gutter de-icing kit, 1000 watts, 2 ft. 18/3 SJTW blue power cord
- Promotes water flow in gutters and downspouts
- Helps prevent water damage caused by ice dams
- Includes roof cable, shingle clips, spacers, owner’s manual & labeling for breaker & on/off switch
Roof and gutter De-Icing cables help prevent costly damage from ice Dam formation by preventing freezing of un-insulated roof eaves, Valleys, gutters and downspouts, and allows water to drain freely. This product is for use on inclined, tab-shingle roofs and in downspouts and gutters only. To ensure water can flow to the ground, cable should be installed on Unheated portions of the roof (usually the overhang) as well as in Valleys, gutter and downspouts. Roof and gutter De-Icing kits are available in lengths from 30 ft to 240 ft. These products are found as De-Icing and snow melting sets primarily in northern markets beginning in early October.
HEATIT HISD 3-feet Pipe Heating with Built-in Thermostat, Black
- Use for water filled plastic (including PEX) or metal pipes. Not use for anything else, like empty water pipes, fuel lines, hoses, gutters, steam lines and so on. Two year limited quality . If you are not completely satisfied with HEATIT heating cable, please don’t hesitate to contact our customer service in any time, we’ll try our best to solve your issues.
- Pre-assembled easy to install. Including grounded plug with light, built in thermostat, and instructions. Easy to install and use. 120 volt, 7 watts/ft. Built in thermostat to turn the cable 37F on 50F off. Only use 5 amps or less of electricity. Energy saving. 100% screen rate with the Aluminum foil and tinned copper braid.
- Both CSA and ETL approved. Industrial grade heat shrinkage tube for connection. Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket.
- Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. Pipes must be at least 3 feet and at least 3/8” and less than 1 1/2” in. diameter. No crossing. No spiral. No overlap itself. Only straight.
- Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. To avoid the overheat, please don’t plug in the cable for a long time for testing. When you feel the slight warm, please turn it off.
- Copper
Similar items with 4 stars and above
Prime Wire & Cable RHC150W30 Roof & Gutter De-Icing Kit Roof Heating Cable
- 30 ft. Black roof & gutter de-icing kit, 150 watts, 2 ft. 18/3 SJTW blue power cord
- Promotes water flow in gutters and downspouts
- Helps prevent water damage caused by ice dams
- Includes roof cable, shingle clips, spacers, owner’s manual & labeling for breaker & on/off switch
- Total Outlet: 1
Roof and gutter De-Icing cables help prevent costly damage from ice Dam formation by preventing freezing of un-insulated roof eaves, Valleys, gutters and downspouts, and allows water to drain freely. This product is for use on inclined, tab-shingle roofs and in downspouts and gutters only. To ensure water can flow to the ground, cable should be installed on Unheated portions of the roof (usually the overhang) as well as in Valleys, gutter and downspouts. Roof and gutter De-Icing kits are available in lengths from 30 ft to 240 ft. These products are found as De-Icing and snow melting sets primarily in northern markets beginning in early October.
Deflecto Furniture Deflector Air Vent Extender, Linking Clips and Tape Included, For Use with Floor Registers Up to 11" Wide, Clear (UFAD)
- Redirects air from under furniture and into the room for added comfort
- Extends up to 35 inches and can be used on floor registers up to 11″ wide
- Included linking clips keep air deflector together once extended
- included tape can be used to attach deflector to the floor register
- Saves energy on heating and cooling costs
- Use under couches, chairs, beds, dressers and more!
- For central forced air heating and cooling systems
The Deflecto Under Furniture Air Deflector attaches to floor vent covers and directs forced air out from under furniture and into the room for added comfort! Extends up to 35 inches and can be used on floor registers up to 11″ wide, for central forced air heating and cooling systems. The included linking clips keep air deflector together once extended while the included tape makes it easy to attach the deflector to the floor register. Use under couches, chairs, beds and dressers, and save energy on heating and cooling costs.
Prime Wire & Cable RHC600W120 ROOF & GUTTER DE-ICING KIT ROOF HEATING CABLE
- 120 ft. Black roof & gutter de-icing kit, 600 watts, 2 ft. 18/3 SJTW blue power cord
- Promotes water flow in gutters and downspouts
- Helps prevent water damage caused by ice dams
- Includes roof cable, shingle clips, spacers, owner’s manual & labeling for breaker & on/off switch
Roof and gutter De-Icing cables help prevent costly damage from ice Dam formation by preventing freezing of un-insulated roof eaves, Valleys, gutters and downspouts, and allows water to drain freely. This product is for use on inclined, tab-shingle roofs and in downspouts and gutters only. To ensure water can flow to the ground, cable should be installed on Unheated portions of the roof (usually the overhang) as well as in Valleys, gutter and downspouts. Roof and gutter De-Icing kits are available in lengths from 30 ft to 240 ft. These products are found as De-Icing and snow melting sets primarily in northern markets beginning in early October.
Easy Heat ADKS-1000 200-Foot Roof Snow De-Icing Kit
- Snow de-icing cable prevents winter damage to roof, gutters, and downspouts
- Provides uninterrupted path for melting water to flow off roof
- Suitable for most roof and gutter configurations
- available in several lengths
- Easy to install
- no maintenance required. Includes 6 packages of clips
- Fixed resistance, pre-terminated. For residential applications
Product Description
Prevent winter damage to the roof, gutters, and downspouts with an Easy Heat ADKS Roof Snow De-Icing Kit. The simple yet effective design features a low-profile, black cable that snakes along outdoor surfaces and provides an uninterrupted path for melting water to flow without re-icing and forming dams. Suitable for almost any inclined roof and approved for both metal and plastic gutters, the cable is easy to install with the included clips and spacers and provides a handy service year in and year out with no maintenance required. It is also CSA Certified and UL Listed, provides 5 watts per foot and 120 VAC, and comes with a three-wire grounded plug and a 6-foot power cord. The cable is available in 30-, 60-, 80-, 100-, 120-, 160-, and 200-foot lengths to fit any sizing need; all mounting hardware is included.
From the Manufacturer
It’s not those big icicles that do the real damage, it’s the ice you don’t see that backs up in gutters and under shingles. When the ice melts it can really do a number on repair costs. Easy Heat ADKS roof de-icing cable prevents this water and ice damage by providing a clear path for melting water to flow off the roof. The versatile design adapts to most roof and gutter configurations. This product is intended for the sole use of preventing ice dams from forming on inclined roofs with tab shingles, in gutters and downspouts. This roof de-icing cable is not intended for use as a snow melting system to clear roof of ice and snow. This system can be installed with confidence that it will operate for years without requiring service. All components are made of the highest quality material and are tested during critical points in the manufacturing process.
Grip Clip Heat Tape Pro for Ice Dam Prevention Heavy Duty – Self-Regulating – Plug-in Ready Heat Cable – 120V, 6 watts/FT (50 Feet + 10 Feet Cold Lead)
- AMERICAN SUPPORT: Knowledgeable, Minnesota-based company with expert support staff you can actually speak to about ice dam prevention. We are excited to help! Phone: 877-387-4218
- USES: For use on flat roofs, metal roofs, asphalt roofs, rubber roofs and more.
- HEAVY DUTY: Heat Tape Pro is a commercial-grade self-regulating heat cable that substantially outperforms cheap cables such as EasyHeat and FrostKing.
- WARRANTY: Best-in-Industry 5 year warranty – ETL Listed – WILL NOT short or burnout if cable is overlapped and can be used on flat roofs and metal roofs, unlike cheap cables.
- HEADS UP! Please don’t forget to order Radiant Solutions Company Roof Clips with this product – visit www.heattapecalculator.com for cable length and accessory recommendations.
Frost King RC200 Automatic Electric Roof Cable Kits, 200ft x 120V x 5 Watts/ft, 200 Feet, Black
Frost King roof and gutter cables. Prevents ice build up in gutters and ice dams getting under the shingles. Kit comes complete with cable spacers and Shingle clips. Complete installation instructions. Available in lengths from 30′ – 200′.
Conclusion
By our suggestions above, we hope that you can found flat heating tape for you.Please don’t forget to share your experience by comment in this post. Thank you!
