minmommy 
Nowadays, there are so many products of filter housung water in the market and you are wondering to choose a best one. You have searched for filter housung water in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings filter housung water which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Geekpure Filter Housing 10" for Reverse Osmosis System -1/4 Inch Inlet/Outlet-for 2.5 Inch x 10 Inch Fitlers
- Replacement housing for Geekpure RO system,Widely used in RO system or pre-filtration.
- Fit with most RO systems using standard 10″ filters.But different brand,the injection mould is totally different,NOTE:PLEASE REPLACE HEAD AND HOUSING BODY TOGETHER.
- INLET-OUTLET-1/4″ female threaded in and out fittings.matched quick fitting ASIN:B078VQN6TZ .
- SIMPLE INSTALLATION-Easy to replace.Food grade Polyethylene will not cause pollution to water.
- Pack of 3. 1 x Filter housing , 2 x O rings . matched wrench ASIN: B07D9JWRYQ .
Pentek 158643 3/8" #10 3G Slim Line Clear Filter Housing with Bracket and Pressure Relief
- Slim filter housing for low-flow applications with space restrictions
- Clear styrene-acrylonitrile (SAN) for on-site viewing of flow and cartridge condition
- Holds a 10″ x 2-1/2″ sediment or carbon filter cartridge (sold separately)
- Pressure relief button for easier cartridge replacement
- Initial pressure drop of 2 psi at a flow rate of 5 gpm
This Pentek 158643 3/8″ #10 3G Slim Line clear filter housing with integrated mounting bracket and pressure relief is suitable for low flow rate applications that have space restrictions. The sump is made of clear styrene-acrylonitrile (SAN) for on-site viewing of flow and cartridge condition, and the cap is made of reinforced blue polypropylene for strength and resistance to chemicals. The cap has 3/8″ female National Pipe Thread Taper (NPT) threaded input and output connections and a nitrile butadiene rubber (Buna-N) O-ring to ensure a watertight seal. A pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges. The housing can be used with a 10″ x 2-1/2″ sediment or carbon filter cartridge (sold separately). It has an initial pressure drop of 2 pounds per square inch (psi) at a flow rate of 5 gallons per minute (gpm), a maximum operating pressure of 125 psi, and a maximum operating temperature of 125 degrees F (51.7 degrees C). This filter housing meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is for use in various applications, including residential drinking water filtration, food service, and humidifying systems, among others.
Specifications
| Filter cartridge size (H x W) (sold separately) | 10 x 2-1/2 inches (254 x 63.5 mm) |
| Initial pressure drop at 5 gpm | 2 psi |
| Maximum temperature | 125 degrees F (51.7 degrees C) |
| Maximum pressure | 125 psi |
| Maximum dimensions (H x W) | 13-3/8 x 5-3/8 inches (340 x 137 mm) |
| Materials and structural integrity certification | NSF/ANSI standard 42 |
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
Similar items with 4 stars and above
Geekpure 10-Inch Standard Slim Line Blue Filter Housing for 2.5" x 10" Filter -3/4" Brass Female NPT Inlet/Outlet with Pressure Relief Wrench and Bracket
- COMPLETE-Complete 1 set 10 inch blue housing,3/4 inch brass ports with pressure relief button for high pressure,with plastic wrench and bracket.
- STANDARD-Fits all standard sized 2.5 inch x 10 inch filters housing only, filter cartridges are sold separately.
- APPLICATIONS-Used for whole house, reverse osmosis water filtration system.
- WARRANTY-Fits NSF standard.One year limited warranty.
- RESPONSABLE MANUFACTURER- ISO9001:2008 certificated Manufacturer ,also Member of Water Quality Association (WQA),30 Days Money Back Guarantee.
Hydronix HF3-10CLBK34 10" Clear Housing with Black Rib Cap, 3/4" Ports
SimPure Big Blue Filter Housing, 10 Inch Universal Water Filter Housing for Whole House Water Filtration System, with Heavy Duty Steel Mounting Bracket, 4 Screws, Housing Wrench (10”x4.5”)
- HIGH QUALITY: The heavy-duty whole house water filter housing is made of Reinforced Polypropylene for strength and chemical resistance. The o-ring is used to ensure leak-free installation.
- UNIVERSIAL SIZE: 10″ x 4.5” Standard whole house water filtration system set, fits all 4.5 “ x 10 ” filters cartridges (sold separately). You can choose 10” water filters like Geekpure, iSpring, Ronaqua, Hydronix, Pentek, etc.
- LARGE FILTRATION CAPACITY: The product have 1” FNPT water inlet and outlet to ensure high water flow. It can filter large capacity of water and provide sufficient purified water.
- EASY INSTALLATION：This big blue filter housing is designed to provide security and ease of use. Come with wrench and Built-in Pressure relief button for easy filter replacement. Just screw off and on to change filter cartridges with wrench. (Including 1 housing bracket and 4 screws).
- EXCELLENT CUSTOMER SERVICE: We provide one year warranty and 30 days money back, lifetime friendly customer service, if you have any questions, do not hesitate to contact us, we will always to stand help you.
Pentek 150071 3/4" #10 Standard Clear Filter Housing with Pressure Relief
- Standard filter housing for residential, commercial, and industrial applications
- Clear styrene-acrylonitrile (SAN) for on-site viewing of flow and cartridge condition
- Holds a 10″ x 2-1/2″ sediment or carbon filter cartridge (sold separately)
- Pressure relief button for easier cartridge replacement
- Initial pressure drop of 1 psi at a flow rate of 10 gpm
This Pentek 150071 3/4″ #10 Standard clear filter housing with pressure relief is suitable for residential, commercial, and industrial applications. The sump is made of clear styrene-acrylonitrile (SAN) for on-site viewing of flow and cartridge condition, and the cap is made of reinforced blue polypropylene for strength and resistance to chemicals. The cap has 3/4″ female National Pipe Thread Taper (NPT) threaded input and output connections and a nitrile butadiene rubber (Buna-N) O-ring to ensure a watertight seal. A pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges. The housing can be used with a 10″ x 2-1/2″ sediment or carbon filter cartridge (sold separately). It has an initial pressure drop of 1 pound per square inch (psi) at a flow rate of 10 gallons per minute (gpm), a maximum operating pressure of 125 psi, and a maximum operating temperature of 125 degrees F (51.7 degrees C). This filter housing meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is for use in various applications, including residential drinking water filtration, food service, and humidifying systems, among others.
Specifications
| Filter cartridge size (H x W) (sold separately) | 10 x 2-1/2 inches (254 x 63.5 mm) |
| Initial pressure drop at 10 gpm | 1 psi |
| Maximum temperature | 125 degrees F (51.7 degrees C) |
| Maximum pressure | 125 psi |
| Maximum dimensions (H x W) | 12-5/8 x 5-1/4 inches (321 x 133 mm) |
| Materials and structural integrity certification | NSF/ANSI standard 42 |
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
Geekpure 10 Inch Whole House Big Blue Water Filter Housing 4.5" x 10"-1-Inch Inlet/Outlet with Wrench and Bracket-Blue Color (1)
- 10 Inch Housing-Complete one set 10 inch big blue housing,1″NPT inlet/outlet,with pressure release button for high flow,with plastic wrench and bracket, filter cartridges are sold separately.
- STANDARD-Fits all standard sized 4-1/2 inch diameter industry 10 inch whole house cartridges.
- HIGH QUALITY-Fits NSF standard,Large capacity housing for high flow applications.
- WARRANTY-One year limited warranty,30 Days Money Back Guarantee.
- RESPONSABLE MANUFACTURER- ISO9001:2008 certificated Manufacturer ,also Member of Water Quality Association (WQA).
CULLIGAN WH-HD200-C Whole House Sediment Water 1" HD CLR WTR Filter, Clear bowl, grey cap
- Whole house water filtration system with 1″ stainless steel reinforced inlet/outlet connectors
- Perfect for residential homes, helps protect appliances and pluming from sediment and scale
- Features bypass shut off valve, integrated bracket design and battery operated filter change timer
- Reduces: sediment, rust, scale, dirt, coarse sand, sand, fine sand, silt, bad taste, odor, aesthetic chlorine taste and odor (depending on filter cartridge)
- The WH-HD200-C housing has been tested and certified by WQA against NSF/ANSI 372 for low lead compliance, CSA B483.1 and NSF/ANSI 42 for material safety and structural integrity requirements only
- Includes: WR-HD housing wrench, mounting bracket, filter life monitor and filter monitor battery
- Compatible with Culligan filter cartridges: R50-BBSA, CW25-BBS, CP5-BBS, CW5-BBS, RFC-BBSA
The WH-HD200-C Heavy Duty clear whole house system with clear sump allows you to see your filter in action. Included with the unit is a mounting bracket, housing wrench, filter life indicator, built in shut-off, bypass, and pressure relief valve.
DuPont WFPF13003B Universal Whole House 15,000-Gallon Water Filtration System
Conclusion
By our suggestions above, we hope that you can found filter housung water for you.Please don’t forget to share your experience by comment in this post. Thank you!
