minmommy 
Nowadays, there are so many products of digital refrigerator thermostat in the market and you are wondering to choose a best one. You have searched for digital refrigerator thermostat in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings digital refrigerator thermostat which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
bayite AC 110V Fahrenheit Digital Temperature Controller 10A 1 Relay with Sensor
- KEEP TEMPERATURE IN DESIRED RANGE: It’s on/off control mode. Turn on your device at a degree and turn it off at another degree. The difference of the 2 degrees can be minimum 1 and maximum 25.
- HEATING OR REFRIGERATION WORKING MODE: Switch between heating mode and refrigeration mode according to the device your need.
- LONG SENSOR CABLE: 3m/9.8ft. Size of the WATERPROOF probe head: 4mm*20mm
- WIDE RANGE OF USES: seedling heat mat, home brewing, aquarium, pet breeding, incubation, BBQ, fermentation, accelerating germination, electric radiator, electric oven, etc.
- With compressor delay protection function for refrigerating control
This is an AC 110V Fahrenheit Digital temperature controller. It can control the power to a freezer to prevent it from getting too cold, or control the power to a terrarium to prevent it from getting too hot, maintain a stable environment.
This controller provides heating and cooling modes and temperature alarm function.
For example:
If you choose heating mode, set control Value to 100°F, set span value to 10°F. The relay will be connected when temp drop to 90°F. The relay will be disconnected when temp reaches 100°F;
If you choose cooling mode, set control Value to 100°F, set span value to 8°F. The relay will be connected when temp reaches 108°F. The relay will be disconnected when temp drops to 100°F
Specification:
1.Power supply for the controller: AC 110V, 50/60Hz
2.Temperature unit: Fahrenheit, Measure range: -4 ~ 220°F
3.Temperature measure resolution: 1
4.Accuracy: ±0.5
5.Working mode: Heating OR Cooling mode
6.Slew range of temp controlling: 1 – 25(Max temp span between ON and OFF)
7.Control resolution: 1(Minimum temp span between ON and OFF)
8.Power consumption: less than 3W
9.Relay contact capacity: 10A/250VAC, 10A/110VAC
10.Data retention: Yes
11.Compressor delay protection: YES
12.Product size:8.5*7.5*3.5cm / 3.4*3*1.4in
13.Sensor Cable length: 3m/9.8ft
Package Content:
1x Digital Temperature controller
Wrenwane Digital Refrigerator Freezer Room Thermometer, No Frills Simple Operation, White
- SIMPLE DESIGN – The commercial refrigerator thermometer is an attractive but simple designed unit with no over-complicated controls to keep your food safe. The unit itself is white and features a stylish silver trim around the edges.
- BIG DIGITS – Just a glance from across the room and you can easily read the display with it’s big bold digits. Ideal for those with not the best eyesight. No dial in sight.
- VERY SIMPLE TO OPERATE – No instructions necessary. This is the simplest deep monitoring electronic thermometer on the market with only two buttons. Just press the on/off button to switch the thermometer on and then select Degrees or Fahrenheit.
- MAGNETIC BACK, STAND AND HOOK FOR HANGING – You have 3 different choices for placement for the room thermometer. Either stick it to the refrigerator door with the rear magnet, or use the stand to place it on the table-top , and finally you can flip the stand over and use the hook to hang it on a refrigerator shelf.
- WIDE RANGE – The temperature range is from -20°C/-4°F to 60°C/140°F allowing you to use this in the fridge, freezer or as a general room thermometer.
Inkbird Pre-Wired Dual Stage Digital Temperature Controller Outlet Thermostat 110V, 1100W Heating and Cooling Multi-purpose Controllers for Aquaria, Reptile Keeping, and Brewing Fermentation Kegerator
- Simple to use: plug it in, set the temp ranges, place the probe, plug in the heater/cooler into the marked outlet.
- Be able to connect with refrigeration and heating equipment at the same time.
- Easily calibrated.
- Can display in Centigrade or Fahrenheit.
- Whether you need temperature control for fermentation, greenhouse, kombucha control or to set up your temperature project system, the ITC-308 temperature controller is a great choice.
Features:
Temperature Control Range : -50~99 °C / -58~210 ° F
Temperature Resolution: 0.1 ° C / 0.1° F Temperature
Accuracy: ±1°C (-50 ~ 70°C) / ±1°F (-50 ~ 160° F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V ~240V AC
Dimension Body: 140x68x33mm (5.5×2.7×1.3inch)
Socket: 85x42x24mm(3.3×1.7x1inch)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Buzzer Alarm: High and Low Temperature Alarm
Temperature calibration
Over-temperature and sensor fault alarm
Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change.
Sensor Type: NTC sensor (Including)
Ambient Temperature: -30~ 75 ° C / -22~ 167 ° F
Storage Temperature: -20~ 60 ° C / -4~ 140 ° F
Humidity 20~85% (No Condensate)
Warranty: 1 Year
It has certificate of EMC, LVD, RoHS, FCC compliance.
Package Content:
1x Temperature controller ITC308
1x Manual
Inkbird All-Purpose Digital Temperature Controller Fahrenheit &Centigrade Thermostat w Sensor 2 Relays ITC-1000
Inkbird ITC-1000 Dual Stage Digital Temperature Controller Fahrenheit ＆ Celsius Thermostat with Sensor for 3D Printer,Freezer,Fridge,Hatching ect (110 Volt)
Fahrenheit and Celsius Display Can Be Choose
Temperature Calibrating, Refrigerating control output delay protection
Control the Temperature by Setting the Temperature Set Value and the Difference Value
Alarm When Temperature Exceeds the Limit or When Sensor Error
2 Relays, Switch Between Cooling and Heating Modes
Technical Parameter:
Output: 2 Relays
Temperature Measuring Range: -50～210 oF / -50 oC-99 oC
Resolution: 0.1 oF / 0.1 oC
Accuracy: ±1 oF（-50 oF -160 oF）/ ±1 oC（-50 oC -70 oC） Power Supply: 110VAC 50Hz/60Hz
Power Consumption: 3W
Sensor: NTC Sensor
Relay Contact Capacity: Cooling (10A/250VAC)/ Heating (10A/250VAC);
Ambient Temperature: 0 oC-60 oC
Storage Temperature: -30 oC-75 oC
Relative Humidity: 20-85% (No Condensate)
Package Content:
1x Temperature controller ITC 1000 110V
1x 7.87″ SENSOR
1x Muanal
WILLHI WH1436A Temperature Controller 110V Digital Thermostat Switch Sous Vide Controller NTC 10K Sensor Improved Version
- WE’VE IMPROVED THE CONTROLLER: simplified operation, larger power, wider control range, standard U.S. outlet, enhanced waterproof sensor probe. Get the new version right now.
- KEEP TEMP IN DESIRED RANGE: Turn on your device at a set degree and turn it off at another set degree. The difference of the 2 degrees can be minimum 0.1 and maximum 288.
- HEATING OR REFRIGERATION WORKING MODE: Switch between heating mode and refrigeration mode according to the device you plug into the controller .
- MAX LOAD: 1100W at 110V. Outlet not compatible with 2 hot lines 220V plug (Celsius or Fahrenheit Read-out).
- WIDE RANGE OF USES: seedling heat mat, home brewing, aquarium, pet breeding, incubation, BBQ, fermentation, accelerating germination, electric radiator, electric oven, etc . Total Outlet: 1
The WH1436 temperature controller can turn on/off an electric appliances at desired temperature.
For example, you can use the controller to turn on a heater at 99.9 F and turn it off at 100 F. Or turn on a freeze at 52 F and turn it off at 45.3 F.
(Please be noted that the controller itself doesn’t change temp. You need to use heater or refrigeration equipment with it.)
Main features:
1-YEAR WARRANTY: From the date of purchase.
Plug and play. No worry about wiring.
Maximum load: 880W @110V or 1960W @240V.
Heating OR refrigeration working mode.
Celsius or fahrenheit read-out.
Temperature calibration.
Compressor delay protection time setting.
High and low temperature alarms are available(This is a useful function. You can use this feature to alarm you when the temperature overshoots your desired temperature)
Auto shut off timer(It doesn’t turn off the controller itself. The timer just turns off the load when specified minutes counts down to 0.)
Specification:
1.Power supply: AC 110V 50/60Hz
2.Measure range: -58 ~ 230 F(-50 ~ 110 C)
3.Temperature resolution: 0.1
4.Accuracy: ±0.5
5.Working mode: Heating OR Cooling mode
6.Slew range of temp controlling: 0.1 – 230(difference between turn-on degree and turn-off degree)
7.Control resolution: 0.1
8.Power consumption: less than 3W
9.Relay contact capacity: 10A
10.Store setting after power off: YES
11.Compressor delay protection: YES
12.High and Low Temperature alarm: Yes
13.Product size: 4.9×3.6×1.8 inch (12.5×9.1×4.5 cm)
14.Sensor Cable length: 3m(9.8ft)
Advanced function:
1.Switch temperature unit(Default: F): F or C
2.Switch resolution(Default:0.1): 0.1 or 1
3.Auto shut off timer(Default:OFF)
Package Content:
1x WH1436A Temperature controller
1x sensor cable
Freezer Thermostat WDF18-L Universal fridge freezer Refrigerator Thermostat Temperature Control 250V/5(4) A 125V/8(6) A 3-Pin 6 mm Dia Shaft 50/60Hz replacement thermostat Refrigerator
- ➤ APPLICATION: Control the temperature of refrigerator, freezer, display cabinet, congealer, beverage cooler and similar product.
- ➤ PREMIUM QUALITY: This refrigerator thermostat ideal replace for your damaged thermostat, features 3 pins, D shaped shaft.
- ➤ PREMIUM QUALITY: The replacement part is made from high quality material and well-tested by the manufacturer.
- ➤MONEY-BACK GUARANTEE: For any reason you’re not completely satisfied, you can ask for a replacement or full refund, no questions asked.
Specifications
The WDF18 Refrigerator Cold Control Thermostat is used in refrigerator units and freezers as a sensor. The thermostat senses the temperature increase in the evaporator during the cycle of defrosting and turns off when ice is melted. The tools needed for this repair project is a putty knife, Phillips and flat blade screw driver, 1/4 inch nut driver, and needle nose pliers. Remember to unplug refrigerator from power source as a safety precaution. Refer to the manual provided by the manufacturer for further installation instructions.
Fixes the following symptoms:
*Will Not Start.
*Fridge too cold.
*Fridge and Freezer are too warm.
*Fridge runs too long.
*Freezer too cold.
Description:
Product Name : Refrigerator Thermostat
Model No. : WDF18
Power : AC 110/220V, 50/60Hz
Warm On: 2.5 ℃/36.5 ºF
Warm Off: -10 ℃/14 ºF
Cold On: 2.5 ℃/36.5 ºF
Cold Off:-18℃/-0.4 ºF
Shaft Diameter : 6mm/ 0.23″
Cord Length(Approx.) : 70cm/ 27.5″
Body Size(Approx.) : 5.5 x 3.5 x 2.3cm/ 2.2″ x 1.4″ x 0.9″(L*W*T)
Material : Metal, Plastic
Package :
1 x Refrigerator Thermostat
Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing.The measurement allowed error is +/-1-3 cm.
bayite Temperature Controller BTC201 Pre-Wired Digital Outlet Thermostat, 2 Stage Heating and Cooling Mode, 110V – 240V 10A
KETOTEK STC-1000 Digital Temperature Controller Digital LED Temperature Controller 110V Thermostat Sensor 2 Relay Output (110V-220V)
- ►KEEP TEMPERATURE IN DESIRED RANGE AND GUARANTEED ACCURACY:It’s on/off control mode.Turn on your device at a degree and turn it off at another degree.Fully utilize the stc microcontroller and NTC probe to have this controller has great accuracy:±1℃(-50℃～70℃)
- ►WIRRING HEATER AND COOLER AT THE SAME TIME:No more frequently change wirring between heater and cooler.This stc-1000 temperature controller has 2 Relays.Compared with other 1 relay temperature controllers,you can wire 2 appliances (heater and cooler) at the same time.(Please kindly note no outlets,wirring needed)
- ►OVER 40 IN WATERPROOF PROBE CORD FOR ENDLESS APPLICATION:The temperature controller is equipped with over 40’’ inch waterproof probe can be used in moisture and water environment,you can use it in home brewing, fridge,pet breeding,reptile tank,incubation,fermentation,seedling heat mat, accelerating germination.
- ►ABS PLASTIC SHELL AND COMPRESSOR DELAY PROTECT FUNCTION:Made of ABS heavy-duty and anti-flamming plastic shell,designed with compressor delay protection,alarm when temperature exceeds temperature limit.All these promise the best safety guarantee to this temperature controller.
- ►KETOTEK 1 YEAR GUARANTEE AND PROFESSIONAL ELECTRICIAN SUPPORT:Every piece of our products is strictly inspected before sale.If you have any question please don’t hesitate to contact use when you use it,we have profesional technicians to help you with any problems in using.All ketotek products include a 12-month warranty, we will try our best to meet your satisfaction.
Technical Parameters
1.Temperature measuring range: -50 ° C ~ 99 ° C
2.Resolution: 0.1 ° C;
3.Accuracy:+- 1° C (-50 ° C ~ 70 ° C);
4.Sensor error delay: 1 minute
5.Power supply: AC/DC 110V
6.Power consumption: <>
7.Sensor: NTC sensor (1PC);
8.Relay contact capacity: Two Relay Cool 10A/250VAC; Heat 10A/250VAC;
9.Ambient temperature: 0 ° C ~ 60 ° C;
10.Storage temperature: -30 ° C ~ 75 ° C;
11.Relative humidity: 20% ~ 85% (No condensate)
12.Sensor length: 1.0m
13.Front Panel Size: 75×34.5mm Product Size: 75×34.5×85 mm Mounting Size: 71x29mm
Package Includes
1 x Temperature Controller
1 x Temperature sensor
1 x Instruction Manual
90 DAY MONEY BACK GUARANTEE
All KETOTEK customers enjoy 90 Day Money Back Guarantee. Customers can return and get refunded in case the purchasing is not satisfactory for any reason. You have no risk to try and we will provide you the best service!
Conclusion
By our suggestions above, we hope that you can found digital refrigerator thermostat for you.Please don’t forget to share your experience by comment in this post. Thank you!
