minmommy 
Nowadays, there are so many products of dc water heating element with thermostat in the market and you are wondering to choose a best one. You have searched for dc water heating element with thermostat in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings dc water heating element with thermostat which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
DERNORD 12V 600W Immersion Heater Submersible Water Heater Element Stainless Steel Heating Element with 1 Inch NPT Fitting Double U Type
- 12v DC heater connects with batteries, solar panels, hydroelectric generators and wind turbine dump
- 1″ NPT flange fits USA standard water tank or your own custom heater tank
- UL and cUL listed to the safety standards
- Stainless steel surface has electropolish
- Supplied with silicon sealing washer which is flexible and waterproof
Product Features
12V 600W Element : These elements are made from stainless steel to prevent any corrosion so are suitable for use in virtually all types of water tank
Product Application
→ Great for use heating water in domestic hot water cylinders or water tanks in caravans,boats,workshops etc. Can also be used with waste vegetable oil in the the manufacture of biodiesel, and for home brewing etc
→ Can also be used with waste vegetable oil in the the manufacture of biodiesel, and for home brewing etc
→ These can also be used to prevent water freezing during winter months in livestock drinkers or raised ponds by connecting one to a large 12v battery recharged by a large solar panel or wind turbine, just use a basic 5 degrees c normally open thermostat and when the water temperature gets near five degrees the heater will automatically come on and warm the water by a few degrees before switching off again, one could also be used in the water storage tank in your loft if its prone to freezing in the winter months
NOTES
If you have a gas hot water heater you may wish to put an electric unit ahead of it. This way the gas heater is always being fed hot water so it does not turn on as often and for shorter periods of time when it does.
If used as a diversion (dump) load, such an element is connected to the batteries via a charge regulator. When the regulator detects that the batteries are fully charged, it diverts the generated electricity to the element which heats water.
Technical Details
Voltage:12 volts
Wattage:600 watts
Item Weight:10.95 Ounces
Product Diameter: 8mm
Tube length: 170mm
Screw Type:1”NPT
Color:White
Bestol 2pcs PTC Heating Element 50W AC DC 12V 220 Degree consistant Temperature Ceramic Thermostatic
- 2PCS ,Safety, surface insulationheat up quickly, long service lifeconstant temperaturehigh power, easy use, high reliability
- The PTC part is used for heating air or solid
- It’s meterial has a characteristic that it is constant temperature on the surface
- The power consumption of the heater is not fixed
- The better the heat dissipation, the greater the power.
Product Name :PTC Heating Element
Size(Approx.) :50×15×3.5mm
Voltage 12V AC/DC
Temperature:220 Degree Celsius
Heat Material: Thermistor
Heat Methods: Heating Conduction
Lead Wire: 150mm High Temperature Line
Surface Insulate: Yes
Packing:
2pc/lot 50x15mm 12V 220 Degree Celsius PTC Heater Element
UltraSource Stainless Steel Heating Element w/ Dial, 1500 W
Heating elements from UltraSource provide controlled heat for proper knife sterilization.
Bestol 2pcs PTC Heating Element 50W AC DC 12V 120 Degree consistant Temperature Ceramic Thermostatic
- 2PCS ,Safety, surface insulationheat up quickly, long service lifeconstant temperaturehigh power, easy use, high reliability
- The PTC part is used for heating air or solid
- It’s meterial has a characteristic that it is constant temperature on the surface
- The power consumption of the heater is not fixed
- The better the heat dissipation, the greater the power.
Product Name :PTC Heating Element
Size(Approx.) :50×15×3.5mm
Voltage 12V AC/DC
Temperature:120 Degree Celsius
Heat Material: Thermistor
Heat Methods: Heating Conduction
Lead Wire: 150mm High Temperature Line
Surface Insulate: Yes
Packing:
2pc/lot 50x15mm 12V120 Degree Celsius PTC Heater Element
Bestol 2pcs PTC Heating Element 50W AC DC 24V 70 Degree consistant Temperature Ceramic Thermostatic
- 2PCS ,Safety, surface insulationheat up quickly, long service lifeconstant temperaturehigh power, easy use, high reliability
- The PTC part is used for heating air or solid
- It’s meterial has a characteristic that it is constant temperature on the surface
- The power consumption of the heater is not fixed
- The better the heat dissipation, the greater the power.
Product Name :PTC Heating Element
Size(Approx.) :50×15×3.5mm
Voltage 24V AC/DC
Temperature:70 Degree Celsius
Heat Material: Thermistor
Heat Methods: Heating Conduction
Lead Wire: 150mm High Temperature Line
Surface Insulate: Yes
Packing:
2pc/lot 50x15mm 24V 70 Degree Celsius PTC Heater Element
WILLHI WH1436A Temperature Controller 110V Digital Thermostat Switch Sous Vide Controller NTC 10K Sensor Improved Version
- WE’VE IMPROVED THE CONTROLLER: simplified operation, larger power, wider control range, standard U.S. outlet, enhanced waterproof sensor probe. Get the new version right now.
- KEEP TEMP IN DESIRED RANGE: Turn on your device at a set degree and turn it off at another set degree. The difference of the 2 degrees can be minimum 0.1 and maximum 288.
- HEATING OR REFRIGERATION WORKING MODE: Switch between heating mode and refrigeration mode according to the device you plug into the controller .
- MAX LOAD: 1100W at 110V. Outlet not compatible with 2 hot lines 220V plug (Celsius or Fahrenheit Read-out).
- WIDE RANGE OF USES: seedling heat mat, home brewing, aquarium, pet breeding, incubation, BBQ, fermentation, accelerating germination, electric radiator, electric oven, etc . Total Outlet: 1
The WH1436 temperature controller can turn on/off an electric appliances at desired temperature.
For example, you can use the controller to turn on a heater at 99.9 F and turn it off at 100 F. Or turn on a freeze at 52 F and turn it off at 45.3 F.
(Please be noted that the controller itself doesn’t change temp. You need to use heater or refrigeration equipment with it.)
Main features:
1-YEAR WARRANTY: From the date of purchase.
Plug and play. No worry about wiring.
Maximum load: 880W @110V or 1960W @240V.
Heating OR refrigeration working mode.
Celsius or fahrenheit read-out.
Temperature calibration.
Compressor delay protection time setting.
High and low temperature alarms are available(This is a useful function. You can use this feature to alarm you when the temperature overshoots your desired temperature)
Auto shut off timer(It doesn’t turn off the controller itself. The timer just turns off the load when specified minutes counts down to 0.)
Specification:
1.Power supply: AC 110V 50/60Hz
2.Measure range: -58 ~ 230 F(-50 ~ 110 C)
3.Temperature resolution: 0.1
4.Accuracy: ±0.5
5.Working mode: Heating OR Cooling mode
6.Slew range of temp controlling: 0.1 – 230(difference between turn-on degree and turn-off degree)
7.Control resolution: 0.1
8.Power consumption: less than 3W
9.Relay contact capacity: 10A
10.Store setting after power off: YES
11.Compressor delay protection: YES
12.High and Low Temperature alarm: Yes
13.Product size: 4.9×3.6×1.8 inch (12.5×9.1×4.5 cm)
14.Sensor Cable length: 3m(9.8ft)
Advanced function:
1.Switch temperature unit(Default: F): F or C
2.Switch resolution(Default:0.1): 0.1 or 1
3.Auto shut off timer(Default:OFF)
Package Content:
1x WH1436A Temperature controller
1x sensor cable
Conclusion
By our suggestions above, we hope that you can found dc water heating element with thermostat for you.Please don’t forget to share your experience by comment in this post. Thank you!
