minmommy 
Nowadays, there are so many products of closed loop hot water circulator pump in the market and you are wondering to choose a best one. You have searched for closed loop hot water circulator pump in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings closed loop hot water circulator pump which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
43,115 Reviews Scanned
Taco 006-B4 Bronze Circulator Pump 3/4-Inch Sweat
- Flow Range: 0-10 GPM
- Head Range: 0-9 Feet.
- Minimum Fluid Temperature: 40F.
- Maximum Fluid Temperature: 220F.
- Maximum Working Pressure: 125 psi.
- Connection Sizes: 3/4 Sweat.
- Standard High Capacity Output-Compact Design – Quiet, Efficient Operation
- Direct Drive-Low Power Consumption – Unique Replaceable Cartridge Design-Field Serviceable
- Self-Lubricating – No Mechanical Seal – Unmatched Reliability –Maintenance Free
- Cast Iron, Flanged or Bronze Construction with Sweat, Threaded or Union Connections
- This product runs using a 0.025 (1/40) horsepower motor
Product Description
Bronze Circulator Pump 3/4-Inch Sweat
From the Manufacturer
The TACO 006 is designed for circulating hot or chilled fresh water in open or closed loop applications. Typical uses include hydronic heating, domestic hot water recirculation, hydro-air heating/cooling, heat recovery units, water source heat pumps, drain down open loop solar systems and potable water applications. The unique, replaceable cartridge contains all of the moving parts and allows for easy service instead of replacing the entire circulator. The compact, low power consumption design is ideal for high efficiency jobs.
Grundfos 59896155 UP15-42 F 115V Brute 9H Recirculator Pump
- Cast iron Flow range – 0- 15.5 U.S. GPM, Head range -1- 15-Feet
- Ceramic shaft and radial bearings with Carbon axial bearing and Stainless steel rotor can and bearing plate
- Corrosion-resistant impeller, Composite, PES
- Type of connection: C.I. Flange / Pipe connection: 2 – Bolt Flange
- The motor is a 1-phase motor. No additional motor protection is required
Grundfos UP15-42F Circulator Pump (59896155) is a 1/25HP cast iron circulator pump designed for use in closed loop heating applications, such as radiant heating, baseboards, fan coils, etc. Features include a built-in motor protection for longer life and better performance. It is suitable for a wide range of applications, including radiant heating, hydronic heating, fan coil heating, solar and other system types. Grundfos circulation pump has a whisper-quiet operation for sound sensitive installations. Box includes (2) Gaskets (O-rings).
Taco, 009-SF5, Hot Water Circulator Pump, SS, 1/8 HP
Grundfos 59896775 Up15-29su Circulator Pump, 1/12 Hp, 115v W/ Npt Union Connection
Grundfos UP15-29SU (59896775) model circulator incorporates a stainless steel body design and 1-1/4″ union connection, smaking it suitable for a wide range of open and closed loop radiant heating, hydronic heating, hot water recirculation, solar & other applications.
NOTE: Returns will not be ACCEPTED if item has been INSTALLED or there should be no signs of installation. Must be returned in the Same Packaging as received.
Taco 0011-F4 1/8-HP Cast Iron Cartridge Circulating Pump
Product Description
The Taco 0011 is specifically designed for high head / medium flow applications in large residential or light commercial closed loop hydronic heating and chilled water cooling systems. Ideal for high pressure drop boilers, fan coil units, heat exchangers, large radiant heating and heat recovery/geothermal systems. The 0011 should be used on open loop systems. The unique replaceable cartridge contains all of the moving parts and allows for easy service instead of replacing the entire circulator. Universal flange to flange dimensions and orientation allows the 0011 to easily replace other models. Compact, low power consumption design makes it ideal for high-efficiency jobs. Features: exclusive ACB anti-condensate baffle with ambient air flow – protects motor windings against condensate buildup, high velocity performance – compact design, quiet and efficient operation, direct drive – low power consumption, unique replaceable cartridge design – field serviceable, self lubricating, no mechanical seal, unmatched reliability, maintenance free, universal flange to flange dimensions, and cast iron construction. Motor Type: Permanent Split Capacitor Impedance Protected. Maximum Flow: 21 GPM. Maximum Head: 31′. Minimum Fluid Temperature: 40°F (4°C). Maximum Fluid Temperature: 230°F (110°C). Maximum Working Pressure: 150 PSI. Connection Sizes: 3/4″, 1″, 1-1/4″, and 1-1/2″ Flanged. Dimensions: 7-1/2″ x 6-1/8″ x 3-1/2″ x 3-3/8″ x 5-5/8″ x 6-1/2″.
From the Manufacturer
The Taco High Velocity Series 0011 Cartridge Circulator is specifically designed for high-head/medium-flow applications in large residential/light commercial closed-loop hydronic heating and chilled water cooling systems.
Similar items with 4 stars and above
Taco 009-F5 Cast Iron High Velocity Cartridge Circulator Pump
Product Description
The Taco 009 is designed for a wide range of residential and light commercial higher-head/lower-flow water circulating applications. Typical uses include hydronic heating, radiant in-floor/panel heating, and closed-loop solar heating systems. The Stainless Steel 009 can be used in higher-head/lower-flow heat recovery, open-loop solar heating, and light commercial domestic water recirculation systems. The unique replaceable cartridge contains all of the moving parts and allows for easy service, instead of replacing the entire circulator. Compact, direct-drive, low power consumption design is ideal for high-efficiency jobs. Max. Flow: 10 GPM Max. Range: 35 Feet Min. Fluid Temperature: 40 ̊F (4 ̊C) Max. Fluid Temperature: 230°F (110 ̊C) Max. Working Pressure: 150 psi Connection Sizes: 3/4″, 1″, 1-1/4″, 1-1/2″ Flanged; Volts: 115, Hz: 60, Amps: 1.40, RPM:3250, HP 1/8.
From the Manufacturer
Taco 00 Series Single Phase Circulating Pump. Taco 00″ cartridge circulator is designed to make your job easier. Installation is quick and easy, and maintenance is a snap. With no mechanical seal, the self-lubricating design provides unmatched reliability. Every 00″ features a field-replaceable cartridge that contains all the moving parts. Less flanges 115 Volt, 60 Hz, 3250 RPM Standard high capacity output Direct drive, low power consumption Universal flange to flange dimension Model Nomenclature F – Cast Iron, Flanged Z – Zoning Circulator BC – Bronze, Sweat, Panel Mount IFC – Integral Flow Check Single Phase Circulating Pump. TACO 1/8HP 115V CI PUMP L/FLANGES. Replacement Part. Home Repair, Repair Parts, Fix Plumbing.
Similar items with 4 stars and above
Grundfos 52722512 3-Speed 1/6 Horsepower Circulator Pump with Flow Check ASIN: B002YR4AVW View on Amazon, Red
Product Description
Grundfos 52722512 3-Speed 1/6 Horsepower Circulator Pump with Flow Check
From the Manufacturer
The Grundfos UPS26-99FC is a 3-speed cast iron circulator pump (Grundfos SKU# 52722512) with built-in flow check. 3 speeds (Low/Med/High) of the Grundfos UPS26-99FC make this model very versatile and allow to use it in a large variety of heating applications inlcuding radiant, hydronic, radiators, fan coils, etc. A built-in flow check eliminates the need to buy and install a separate in-line check valve. This circulator is designed for closed loop systems with medium to high flow rates and pressure drops. A built-in automatic resetting thermal protection of the pump assures motor safety and extends circulator’s life.
Taco 006-BC4 Circulating Pump, 1, Color
- Standard High Capacity Output
- Quiet, Efficient Operation
- Unique, 00 family replaceable cartridge contains all of the moving parts so you can service it easily instead of replacing the entire unit.
- Compact, low-power consumption design is ideal for high efficiency jobs
- Self-Lubricating
Product Description
Bronze Cartridge Circulating Pump
From the Manufacturer
The Taco 006 Cartridge Circulator is designed for circulating hot or chilled fresh water in open or closed -loop, lower-flow applications.
Taco 0011-SF4 Stainless Steel Cartridge Circulating Pump,1/8 Horsepower
Product Description
The Taco High Velocity Series 0011 Cartridge Circulator is specifically designed for high-head/medium-flow applications in large residential/light commercial closed-loop hydronic heating and chilled water cooling systems. Exclusive, anti condensate baffle (ACB) protects motor windings on chilled water jobs. Available in cast iron or stainless steel construction. Stainless steel can be used on open-loop systems. Unique, replaceable cartridge contains all of the moving parts so you can service it easily instead of replacing the entire unit. Universal flange-to-flange dimensions and orientation allow the 0011 to easily replace other models. Typical Applications: High Pressure Drop Boilers, Fan Coil Units, Heat Exchangers, Large Radiant Heating Systems, Large Heat Recovery/Geothermal Systems
From the Manufacturer
Stainless Steel Circulator Cartridge Circulator is specifically designed for high-head/medium-flow applications in large residential/light commercial closed-loop hydronic heating and chilled water cooling systems.
Taco 0010-F3-1IFC Hot Water Circulator Pump, 1/8 HP, IFC
- Price For: Each Pump Mount: In Line Standards: UL-CUS Phase: 1 Connection Style: Flanged Drive Type: Direct Manufacturers Warranty Length: 3 yr. Item: Hot Water Circulator Pump Voltage: 115 Housing Material: Cast Iron Flange/Union Included: No Shaft Material: Ceramic Mechanical Seal: No Includes: Flange Gaskets Features: wet rotor, maintenance free HP: 1/8
- Amps: 1.10 RPM: 3250 Impeller Material: Polypropylene Thermal Protection: Impedance Max. Temp.: 230 Degrees F Length: 8-3/8″ Min. GPM @ Head: 7 gpm @ 10 ft. Series: 0010-f3-3ifc Max. GPM @ Head: 19 gpm @ 1 ft. Best Efficiency GPM @ Head: 14 gpm @ 6.5 ft. Pump Type: In Line, Wet Rotor Face to Face Dimension: 6-3/8″ Max. Operating Pressure: 125 psi Width: 5-3/8″ Shut-Off: 10.5 ft.
- Loop Configuration: Closed Number of Speeds: 1 Country of Origin (subject to change): United States
‘Hot Water Circulator Pump, Pump Type In Line, Wet Rotor, Series 0010-f3-3ifc, HP 1/8, Voltage 115, 1 Phase, Connection Style Flanged, Face to Face Dimension 6-3/8 In., Max. GPM @ Head 19 gpm @ 1 ft., Best Efficiency GPM @ Head 14 gpm @ 6.5 ft., Min. GPM @ Head 7 gpm @ 10 ft., Shut-Off 10.5 ft., Housing Material Cast Iron, Drive Type Direct, Length 8-3/8 In., Width 5-3/8 In., Loop Configuration Closed, Flange/Union Included No, Includes Flange Gaskets’
Conclusion
By our suggestions above, we hope that you can found closed loop hot water circulator pump for you.Please don’t forget to share your experience by comment in this post. Thank you!
