minmommy 
Nowadays, there are so many products of clamps for hot water tanks in the market and you are wondering to choose a best one. You have searched for clamps for hot water tanks in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings clamps for hot water tanks which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
10,491 Reviews Scanned
2 Pack Heavy Duty Durable Stainless Steel Corrugated Water Flex Connector with Extra Thick Washers for Water Heater and Water Softener (24×3/4 FIP)
This heavy duty stainless steel corrugated connector are designed for easy installation of large capacity water softeners and residential and commercial water heaters to meet the demand of large water flow rate.
Install tip: Do not use Teflon tape during install. Make sure the surface where the connection is made is flat and free from burrs and uneven surface. If leak occurs during new install, do not over tighten, instead, take plumbing grease to cover all surfaces of rubber gaskets and retighten.
Similar items with 4 stars and above
Holdrite 40-SWHP-W QuickStand Water Heater Platform, 21-1/4-Inch x 21-1/4-Inch, Aluminum
- PLATFORM: Accomodates water heaters up to 20 Gallons or 375 pound load
- DRAIN PAN: Platform also serves as a drain pan with a 1 inch drain fitting
- ADAPTABLE: Able to install to concrete or framed walls
- VERSATILE: Can also support other equipment such as washers, tanks, and boilers
- RATED: Compliant ith UPC/IAPMO and IPC requirements
Product Description
The HoldRite Suspended Water Heater Quickstand features all of the essential features for any water heater stand. Transforming the plumbing industry through innovation. HoldRite: Converting Makeshift Methods into Engineered Solutions. The last three decades have seen HoldRite evolve from a single product family business to an international corporation and acknowledged industry leader. HoldRite has established a reputation as a leading manufacturer known for innovative products and services in such categories as pipe and equipment support systems, acoustical plumbing solutions, water heater accessories, and water and firestop sleeving systems.
From the Manufacturer
The Holdrite QuickStand Suspended Water Heater Platform is engineered to support water heaters up to 20 U.S. gallons (375 pounds total weight) mounted to a wall. The water tight corners and drain fittings of the platform eliminate the need for an additional drain pan. The QuickStand platform is constructed of galvanized steel and includes mounting materials for concrete or framed wall structures. Drain pan measures 21-1/4-Inch in diameter by 2-1/2-Inch deep with a 1-Inch PVC drain fitting. Item No.40-SWHP-W. For twenty-eight years, HOLDRITE has been the market leader in pipe support and alignment bracket systems. The focus of “Converting Makeshift Plumbing Methods into Engineered Solutions” has led to innovative industry product lines including HOLDRITE, Lockrite, Pexrite, Stout Bracket, Quick Strap, Quick Stand, and HydroFlame.
Similar items with 4 stars and above
M-D Building Products 50142 M-D Weather Stripping Tube Insulation, 3/4 in Pipe, 3 Ft L X 3/8 in T, Polyethylene Foam, Black
ECOTOUCH Electric Tankless Water Heater Point-of-Use Hot Water Heater Digital Display for Energy Efficiency 5.5kW at 240V, White
- 【INSTANT & SUFFICIENT HOT WATER】Applied with 5.5KW heating system, the electric water heater supplies instant, consistent and endless hot water of 116℉or higher temp shortly, no waiting for preheat nor terrible temp up & down, perfect companion for sinks. Time to get rid of those “lukewarm” toys.
- 【SMART SELF ADJUSTMENT】The hot water heater adjusts power input based on flow rate and temp setting in real time. For example, less power will be applied by the system when waterflow reduced, thus you still get ideal temperature instead of scalding hot water, which means comfortable experience. Optimal energy efficiency of 98% saves considerable electric charge.
- 【CONVENIENT USE】The tankless water heater comes with digital display & touch control panel so temp setting is easy job. Now turn on the tap and let the smart unit do the rest, you needn’t go through hard lesson about temp setting by a mixer tap without any hint. The Black model comes with Remote control, useful for installation under sink.
- 【SAFE and DURABLE】Applied with multiple protection devices, every piece goes through strict tests to ensure 100% safe. Inner water and electricity lines are designed to run separately so as to avoid leakage or harm of scale build up. Approval by ETL and qualifies for UL, you can expect outstanding performance for years to come.
- 【POINT of USE】The sleek tankless water heater is compact as an oatmeal box, making it possible to install anywhere close to outlet and avoid energy waste. It can be mounted horizontally, vertically, obliquely, ideal for kitchen, bar, school, hospital, community and hair salon. Please verify it is the right size for you: 5.5kW@240V
- dimensions 11″ x 7.5″ x 2.35″
- pipes fittings :1/2″ NPT.
FEATURES
Instant hot water comes with powerful 5.5kW heating element, expect hot water for 3 seconds, perfect choice for sinks to provide endless hot water any time.
ENERGY SAVING
This tankless water heater avoids standby heat loss of those bulky storage water heaters, minimize energy waste and achieve 65% energy saving with help of its smart self adjustment technology.
HEALTHY WATER QUALITY
Traditional bulky water tanks store water for long time, causing bacterial growth and rust issue, time to get clean water via a tankless hot water heater. The ECOTOUCH unit separates water and electricity line so as to avoid issue of calcium deposits.
MULTIPLY SAFETY PROTECTIONS
Over temperature protection
Dry heating protection
Leakage protection
Water and electricity line separated
EASY INSTALLATION
Real compact design, water heater cooridates with scenes decor, above sink or under sink water heater, horizontally, vertically or obliquely installation. Comes with easy installation brackets, pipe fitting of 1/2″ NPT and 12AWG power cord(fixed to the unit) so you don’t to have to hire a plumber even if you can do it.
SPECIFICATIONS
Power: 5.5kW
Voltage: 240V~60Hz
Min. water flow to activate the unit: 0.475GMP
Max tempt rise from 67°F to 120°F @ 1GPM
Max. Amperage: 23A
Recommended wire size: 12AWG
Required circuit breaker : 1x 2-Pole 30 AMP
KINDLY NOTE
1.The unit is mainly for sinks, not for shower purpose.
2.The tankless water heater should be installed professionally.
3.Please read instruction manual carefully prior to installation and use!
PACKAGE INCLUDES
1X ECOTOUCH 5.5kW instant water heater
1X Instruction manual and warranty card
1X Installation accessories
1X Remote control(for Black model)
Camco Water Bandit -Connects Your Standard Water Hose To Various Water Sources – Lead Free (22484)
- Connects a hose to unthreaded faucets or those with stripped threads
- 3-1/4″ long and attaches to any standard size faucet
- Stop wasting water due to poor connections
- Not intended for use under pressure
- Compliant with all federal and state level low lead laws. CSA Low Lead Content Certified to NSF/ANSI 372
Product Description
Camco’s Water Bandit connects your standard water hose to would-be-unattachable water sources. One end connects to a standard water hose, via a brass, male, standard water connection. The other end – a highly -flexible, silicone-polymer sleeve – stretches to fit over the end of virtually any standard water source; those with damaged or stripped threads and even to water sources with no threads at all.
Amazon.com
Stop Leaky Water Connections
Leaky hose connections can be annoying, messy and wasteful, but they are also preventable with Camco’s Water Bandit. A faucet with damaged threads can mean constantly muddy conditions around the faucet and can cause you to get wet each time you turn the water on. The Water Bandit solves these problems and many more.
Connect your hose to the Water Bandit by screwing the hose onto the threaded brass end. Then simply slide or twist the rubber end of the Water Bandit onto the leaky faucet or water connection until it is fully attached. It’s that easy.
You can even connect Water Bandit to a standard unthreaded faucet to refill your fresh water tank. Connect Water Bandit to your fresh water hose, slide over the threadless connection and you’re ready fill.
Works With Many Types of Faucets
Water Bandit quickly connects to most standard hoses. It will work with damaged or stripped faucet threads and even faucets with no threads at all! NOTE: Discharge end of hose must remain open while in operation. Water Bandit is not designed to hold back pressure. Never leave Water Bandit connected while unattended.
Not intended for use under pressure. Keep the other end of your water hose open or the pressure will pop the Water Bandit off the spigot.
Features
- Quick and easy installation – just slip over damaged faucet and screw hose on threaded end
- Perfect for indoor and outdoor use
- Connects to damaged or threadless faucets
- Perfect solution for leaky hose connections
One Year Limited Warranty
Limited Warranty: Camco warrants this product to be free from defects in material and workmanship under normal use and service conditions for 12 months from the date of first purchase. Camco’s liability is limited solely to the replacement of any defective product returned in to us. To the extent allowable by law, Camco makes no other warranty, either expressed or implied, nor assumes any liability for incidental or consequential damages resulting from the use of this product or for breach of warranty of merchantability or fitness for a particular purpose. Submit warranty claims to Camco Manufacturing, 121 Landmark Drive, Greensboro, NC 27409.
About Camco Manufacturing
Camco started in 1966 with one employee and one product. Today, over 40 years later, we have more than 350 employees, over 3,000 products and five manufacturing facilities to better serve our customers’ needs. Our home office is in Greensboro, North Carolina. We also have locations in Elkhart, Indiana; Portland, Oregon; Leominster, Massachusetts and our newest facility in Beilun, China.
Competitive pricing, superior service, quality products and customer satisfaction are the foundations upon which Camco operates. Our friendly, knowledgeable customer service staff stands ready to assist our customers with any questions. At Camco, we take pride in meeting the ever changing demands of a challenging marketplace while serving you, our most valuable asset.
InSinkErator H-WaveC-SS Involve Wave Instant Hot Water Dispenser System with Stainless Steel Tank, Chrome
- Includes Involve Wave instant hot water dispenser and 2/3-gallon stainless steel hot water tank. Required Hole Diameter : 1.25 inch to 1.5 inch (standard)
- Delivers near-boiling water with easy-to-adjust temperature control. Thermostat : Snap-action, adjustable from 160˚F to 210˚F (factory pre-set at 200˚F)
- Hot water dispenser and tank have durable metal construction
- hot lever automatically shuts off
- Ideal for instantly preparing hot coffee, tea, and other food, cleaning dishes, warming baby bottles, and so much more
- Exclusive 3-Year We Come to You In-Home Full Service Limited Warranty
- That means we come to you if your water dispenser needs service within the warranty period.
bayite 12V DC Fresh Water Pump with 2 Hose Clamps 12 Volt Diaphragm Pump Self Priming Sprayer Pump with Pressure Switch 4.5 L/Min 1.2 GPM 80 PSI Adjustable for RV Camper Marine Boat Lawn
Etekcity Lasergrip 774 Non-contact Digital Laser Infrared Thermometer Temperature Gun -58℉~ 716℉ (-50℃ ~ 380℃), Yellow and Black
- BETTER ACCURACY: The Distance to Spot Ratio is 12:1, meaning the Lasergrip 774 can accurately measure targets at greater distances compared to most other IR Thermometers
- For best accuracy, the distance between the thermometer and object of measurement should approximately be 14.17 inches (36cm)
- TARGET QUICKER: Measure surface temperature ranging from -58℉~ 716℉ / -50℃ ~ 380℃, you can choose the unit from ℉ / ℃
- Response time: ≤500Ms
- A built in Laser gives you the precision to hone in on the exact space you want to measure
- ADDED FUNCTIONS: The LCD screen is backlit, also has an Auto-Off function to extend the battery life, and features a low battery indicator so you never accidentally run out of juice (battery included)
- VERSATILE DESIGN: Infrared Technology makes this thermometer handy to measure the surface temperature of various objects especially temperatures above boiling points and below freezing points
- Use it when you are cooking and barbequing, performing auto maintenance, doing home repairs, and a host of other tasks
- NOTE: The thermometer can’t measure the internal temperature of an object
- Temperature readings from this devices are inanimate objects, the measured temperature for humans or animals will not be correct
- FDA, FCC, CE approved
- Class 2 laser, optical power 0.5-0.9mW
- 1 year warranty (with the option to extend it by 1 extra year for free) by Etekcity
SEAFLO 33-Series Industrial Water Pressure Pump w/Power Plug for Wall Outlet – 115VAC, 3.3 GPM, 45 PSI
- UL 778 & CSA 22.2 Certified
- Self-Priming up to 6 vertical feet
- 3.3 GPM Flow Capacity, 115V AC Current Draw .75 amps (1.2 Max Amps)
- Built-in Adjustable Pressure Switch that turns on/off at 45 PSI
- Plugs into standard wall outlet with pre-installed power plug
Description
SEAFLO’s SFDPA1-033-045-33 has an incredible feature list, high quality components, and amazing performance. UL 778 & CSA 22.2 Certified. The three-chamber high volume design, driven by a heavy-duty motor produces flow rates of 3.3 GPM. It is capable of self-priming up to 6 vertical feet and can run dry making it the price to performance leader. Everything in pictures is included such as a 51S01 Filter – 1/2 NPSM Inlet/Outlet and a 51F01 Fitting – 1/2 FNPSM x 1/2 Barb. This pump also features an electrical cord which can connect directly to any standard US outlet making installation easy and simple. The 115VAC 33-Series can be used in a variety of applications and industries such as marine, boat, RV, industrial, and janitorial thanks to its versatility.
Details
BRAND NEW SEAFLO SFDPA1-033-045-33 Industrial Water Pressure Pump
Sleek finish in Orange and White SEAFLO colors
UL 778 & CSA 22.2 Certified
Plugs into your standard wall outlet for ease of use
Self-priming up to 6 vertical feet
Features an automatic pressure switch that can be adjusted
Built-in check valve
Capable of run dry operation
Ignition Protected
Suitable for food grade applications
**For best results, please use supplied fittings. If using metal fittings, use caution when tightening**
Technical specifications
Voltage: 115VAC
Flow Capacity: 3.3 GPM
Amperage Draw: 0.75 A (MAX 1.2 A)
Valves: Viton
Diaphragm: Santropene
Inlet/Outlet: 1/2″ Threaded MNPT
Dimensions: Approx. 7.98″ x 5.11″ x 4.84″
BYB – 150W 110V Ceramic Infrared Heat Emitter Brooder Coop Pet Infrared Lamp Bulb
- ☀ Perfect for high humidity terrariums
- lasts up to 10,000 hours
- ☀ Use only with a porcelain socket (E26 socket). To avoid scald, please wait at least 1 hour of cool down after turn it off
- ☀ Voltage: AC 110-120V
- Power: 150w
- Material: Ceramic, Metal, NiCrAl
- ☀ This non-light emitting heater bulb offers an excellent 24 hours heat source and will thoroughly heat any reptile without the disturbance of an additional light source
- ☀ It will also increase the ambient air temperature in the terrarium. Infrared heat penetrates the scales and skin tissue, promoting health and healing as it widens the blood vessels and increases blood circulation.
Similar items with 4 stars and above
Conclusion
By our suggestions above, we hope that you can found clamps for hot water tanks for you.Please don’t forget to share your experience by comment in this post. Thank you!
