minmommy 
Nowadays, there are so many products of central boiler hot water exchanger in the market and you are wondering to choose a best one. You have searched for central boiler hot water exchanger in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings central boiler hot water exchanger which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
14,627 Reviews Scanned
Brazed Plate Heat Exchanger Stainless Steel SS316L 4"x12" 50 Plates 1" MPT 430,000 BTU/hr Hydronic Heating
- 400,000 – 450,000 BTU CAPACITY: Depending on the application, this product can produce 400kBtu to 450kBtu per hour.
- 50 PLATES
- 4″x12″ 1″ MPT: 50 brazed plates work to efficiently heat water for your application.
- HIGH QUALITY STAINLESS STEEL 316L AND 99.9% COPPER: Lesser quality materials can cause problems in your heating system, which is why we only use the best materials for our products.
- UL LISTED
- FREE 1 YEAR WARRANTY: Our plate heat exchangers come with a 1-year warranty to cover manufacturer defects.
- MANY WATER HEATING APPLICATIONS: These can be used for Domestic Water Heating, Floor Heating, Snow Melting, District or Zone Heating Systems, Outdoor Wood Furnaces, Hydraulic and Lube Oil Coolers, Radiator Heating, Hydronic Heating, Solar Heating, Wood Boiler
Similar items with 4 stars and above
AB 500 Btu/hour Side Arm Heat Exchanger 25" Single Wall Stainless Steel 3/4" FPT 1" 13
- At 13,500 Btu/hr, this product will help heat the water in a 27gal. tank.
- 3/4″ FPT (Water Heater side) and 1″ FPT (System side)
- The fins in this heat exchanger produce turbulence to increase water heating efficiency.
- Our product comes with a 1.5-year warranty to cover manufacturer defects.
- These can be used for Domestic Hot Water Heating, Outdoor Wood Furnaces, Solar Hot Water Heating, Residential Plumbing
With innovative thermosiphon technology and a fin-enhanced tube, our product works alongside with an indirect water heater to help heat the water in the tank.
This product provides a larger capacity and a faster heating rate using a shorter unit compared to a typical copper version. The fin-enhanced design also helps prevent cross contamination in potable water. With thermosiphon technology circulating the domestic hot water, using a circulation pump with this product can greatly increases the heat recovery by 3 to 4 times.
Product Information and Specifications
Stainless Steel 304 Fin-enhanced 25″ Side Arm Heat Exchanger
Port Size: 3/4” FPT (DHW side), 1” FPT (System side)
Works with (Tank size): 27gal.
Capacity: 13,500 Btu
Heat Transfer: 2.35ft2
Heat Recovery: 3.2 hrs.
Min. Working Temperature: 18F
Max. Working Temperature: 406F
Design Pressure: 150psi
Test Pressure: 225psi
C-C distance: 20.28”
Materials: Stainless Steel 304
Dimensions: 25″ x 2″ x 2″
Applications
Used with conventional boiler, outdoor wood furnace or a solar water heater
Domestic Hot Water Heating
Solar Hot Water Heating
Residential Plumbing
ZVC404-4 Zone Valve Control, 4 Zone
18×18 Water to Air Heat Exchanger Hot Water Coil Outdoor Wood Furnace
This unit is a Water to Air Heat Exchanger for use in your hot air plenum of your existing forced air furnace. This unit is most commonly used in conjuction with an outside wood furnace to transfer heat into your existing forced air system. It can also be used with any other source of hot water such as a boiler to create hot air. This exchanger is for use with ANY outdoor wood stove. And also features quality aluminum fins with seamless copper tubes. Our coils are packaged the best possible way to minimize shipping damage. The coils fit snuggly in the boxes to minimize movement within the box. There are strips of styrofoam all the way around the manifold to prevent damage if dropped. The entire coil is packaged in a double wall, cardboard box. These are also packaged with metal port protectors over the inlet/outlet ports to protect them from shipping damage. Product Data:Finned Area: 18″ x 18″Overall Dimensions: 18-1/4″ x 20″ x 3-1/2″ THICKOverall Dimesions (including Copper Manifold): 18-1/4″ x 23-1/2″ x 3-1/2″ THICKRows of Tubes: 3 (3/8″ Seamless Copper)Inlet/Outlet: 1″ Copper SweatRating: 175 psig/350°FFin Spacing: 12/inchProduct Performance:120,536 BTU with 180°F Entering Water Temp., 15 GPM and 1800 CFM (air flow) We do our best to offer a high quality product that will not be damaged during shipping and you will not have to return due to manufacturers defects such as leaking. We stand behind the exchangers with a LIMITED LIFETIME WARRANTY AGAINST MANUFACTURERS DEFECTS. A free copy of the written warranty is available upon request to our email address.
16×16 Water to Air Heat Exchanger Hot Water Coil Outdoor Wood Furnace
This unit is a Water to Air Heat Exchanger for use in your hot air plenum of your existing forced air furnace. This unit is most commonly used in conjuction with an outside wood furnace to transfer heat into your existing forced air system. It can also be used with any other source of hot water such as a boiler to create hot air. This exchanger is for use with ANY outdoor wood stove. And also features quality aluminum fins with seamless copper tubes. Our coils are packaged the best possible way to minimize shipping damage. The coils fit snuggly in the boxes to minimize movement within the box. There are strips of styrofoam all the way around the manifold to prevent damage if dropped. The entire coil is packaged in a double wall, cardboard box. These are also packaged with metal port protectors over the inlet/outlet ports to protect them from shipping damage. Product Data:Finned Area: 16″ x 16″Overall Dimensions: 16-1/4″ x 18″ x 3-1/2″ THICKOverall Dimesions (including Copper Manifold): 16-1/4″ x 21-1/2″ x 3-1/2″ THICKRows of Tubes: 3 (3/8″ Seamless Copper)Inlet/Outlet: 1″ Copper SweatRating: 175 psig/350°FFin Spacing: 12/inchProduct Performance:94,689 BTU with 180°F Entering Water Temp., 13 GPM and 1200 CFM (air flow) We do our best to offer a high quality product that will not be damaged during shipping and you will not have to return due to manufacturers defects such as leaking. We stand behind the exchangers with a LIMITED LIFETIME WARRANTY AGAINST MANUFACTURERS DEFECTS. A free copy of the written warranty is available upon request to our email address.
Brazed Plate Heat Exchanger Stainless Steel SS316L 3"x8" 20 Plates 3/4" MPT 180,000 BTU/hr Hydronic Heating
- 130,000 – 180,000 BTU CAPACITY: Depending on the application, this product can produce 130kBtu to 180kBtu per hour.
- 20 PLATES
- 3″x8″ 3/4″ MPT: 20 brazed plates work to efficiently heat water for your application.
- HIGH QUALITY STAINLESS STEEL 316L AND 99.9% COPPER: Lesser quality materials can cause problems in your heating system, which is why we only use the best materials for our products.
- UL LISTED
- FREE 1 YEAR WARRANTY: Our plate heat exchangers come with a 1-year warranty to cover manufacturer defects.
- MANY WATER HEATING APPLICATIONS: These can be used for Domestic Water Heating, Floor Heating, Snow Melting, District or Zone Heating Systems, Outdoor Wood Furnaces, Hydraulic and Lube Oil Coolers, Radiator Heating, Hydronic Heating, Solar Heating, Wood Boiler
Similar items with 4 stars and above
Brazed Plate Heat Exchanger Stainless Steel SS316L 3"x8" 26 Plates 3/4" MPT 210,000 BTU/hr Hydronic Heating
- Copper brazing
- Imported
- 180,000 – 210,000 BTU CAPACITY: Depending on the application, this product can produce 180kBtu to 210kBtu per hour.
- 26 PLATES
- 3″x8″ 3/4″ MPT: 26 brazed plates work to efficiently heat water for your application.
- HIGH QUALITY STAINLESS STEEL 316L AND 99.9% COPPER: Lesser quality materials can cause problems in your heating system, which is why we only use the best materials for our products.
- UL LISTED
- FREE 1 YEAR WARRANTY: Our plate heat exchangers come with a 1-year warranty to cover manufacturer defects.
- MANY WATER HEATING APPLICATIONS: These can be used for Domestic Water Heating, Floor Heating, Snow Melting, District or Zone Heating Systems, Outdoor Wood Furnaces, Hydraulic and Lube Oil Coolers, Radiator Heating, Hydronic Heating, Solar Heating, Wood Boiler
Similar items with 4 stars and above
Taco 009-BF5-J Circulating Pump Cast Iron with Bronze Cartridge for longer life then standard 009-F5.
- Standard High Capacity Output Compact Design
- Unique Replaceable Cartridge Design, Field Serviceable Direct Drive-Low Power Consumption
- Unmatched Reliability, Maintenance Free
- Universal Flange-to-Flange Dimensions Low-Lead Compliant
- Top selling pump for outdoor wood boiler furnaces
Taco 009 BF5-J Pump (Cast Iron pump with a Bronze Cartridge) – Is an upgraded and superior pump then the standard Taco 009 and equivalent base model pumps. The Bronze Cartridge increases the life of the pump and is able to handle the hard application better. This pump will seamlessly replace other pumps without any issues, it simply is the exact same pump as the Taco 009 with better parts inside. How much time do you waste replacing pumps? The cartridge is replaceable if you do have a failure. Taco 009 BF5-J Pump (Cast Iron pump with a Bronze Cartridge) – is specifically designed for high-head/high-flow applications in large residential and light commercial systems. It is ideal for high pressure drop boilers, fan coil units, heat exchangers, larger radiant systems, heat recovery and geothermal systems. The bronze cartridge 009 should be used on open loop systems. Taco 009 BF5-J & Taco 0011 BF4-J are the flagship pumps of the wood boiler industry. DO NOT compare this pump to the Taco 009-F5 pump. The F5 is the base model Taco 009. Ours is the PREMIUM Taco 009. *** GASKETS INCLUDED WITH PUMP *** Typical Applications: Hydronic Heating Radiant In-Floor/PanelHeating Closed-Loop Solar Heating Systems.
Conclusion
By our suggestions above, we hope that you can found central boiler hot water exchanger for you.Please don’t forget to share your experience by comment in this post. Thank you!
