minmommy 
Nowadays, there are so many products of brass water misters for cooling in the market and you are wondering to choose a best one. You have searched for brass water misters for cooling in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings brass water misters for cooling which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Innoo Tech Misting Cooling System 26.2FT (8M) Misting Line + 11 Brass Mist Nozzles + a Brass Adapter(3/4) Outdoor Mister for Patio Garden Greenhouse Trampoline for waterpark
- ???? Upgraded high quality: Precision brass spray nozzle, precision production, made of high quality UV treatment hose, UV resistance up to 3.5 or higher, yellowing resistance, hydrolysis resistance, microbial degradation resistance.
- ???? Easy to install: With fixed straps and buckles, can be easily attached to trampolines and parasols. The fully assembled system can be installed in less than 10 minutes, providing very fine mist in hot summer weather. To significantly cool the air.
- ???? Cooling: The outdoor cooling system provides a cool environment for your favorite outdoor area, reducing the ambient air temperature to 20 degrees.
- ???? Energy saving and environmental protection: The atomizing cooling system is directly cooled by tap water spray, does not consume electricity, does not consume energy, saves you money and becomes an environmentalist.
- ???? Wide application: atomization cooling system is widely used in gardens, trampoline water parks, landscaping, greenhouses, humidification, outdoor cooling systems, epidemic prevention, spray disinfection, deodorizing air purification, swimming pool atomization cooling, atomizing mosquito systems, etc.
Sywon 40 Pack Brass Misting Nozzles Replacement Heads for Garden Patio Lawn Landscaping Dust Control and Outdoor Cooling Mister System, 10/24 UNC
- HIGH EFFICIENCY: Operation Pressure:20-70kg/cm. Flow Rate:80-145ml/min
- DURABLE MATERIAL: Made of brass with good quality
- Rust-free and durable. High cost performance: 38pcs+2pcs (Extra Spare) =40pcs
- 0.012” DIA. ORIFICE: The orifice of these misting nozzles is 0.012 inch/0.3 mm in diameter, which fits for low pressure mister system
- EASY TO INSTALL: Easily screw into any 10/ 24 UNC threaded mist nozzle opening
- WIDE USAGE: Widely apply for garden, patio, lawn misting system, outdoor cooling, greenhouse, humidification, spraying disinfectant, epidemic prevention, deodorant air purification, small fountain, etc.
Cairondin Outdoor Misting Cooling System, 26.2ft Misting Line(1/4"), 10 Stainless Steel Mist Nozzles, a Brass Adapter(3/4"), Outdoor Mister for Patio Garden Greenhouse Fan Trampoline for Waterpark
- 【Upgrade High Quality】 The brass adapter is precisely customized and is suitable for US standard 3/4 thread, very easy to connect the garden faucet. High quality UV treated flexible tubing, resistant to UV up to 3.5 or more, resistant to yellowing, hydrolysis and microbial degradation. With a filter mat, it can filter impurities in tap water, and avoid impurities blocking the mist nozzle, the filter mat needs to be cleaned frequently
- 【Lengthen Plug-in Mist Nozzles】Stainless steel plug-in mist nozzle, easy to install and pull out. Lengthen connecting part, so the mist nozzle will not fly out when spraying. The mist nozzle can be completely disassembled, easy to clean the dirt. When the mist nozzle is blocked by impurities and cannot be sprayed, you can easily solve it
- 【High Quality Snap-on Connector】The connector has a snap-on design, and the misting pipe, mist nozzle and connector can be tightly connected. Each connector is precision fabricated and tested by high pressure, it will not leak due to excessive water pressure. It is more convenient to connect the garden faucet, and the misting pipe does not need to rotate together
- 【Energy Conservation and Clean Refreshing Air】Misting cooling system directly use tap water to spray and cool down, no electricity consumption, no energy consumption, save more money for you. Misting cooling system delivers very fine mist to significantly cool the air in the hottest summer weather
- 【Wide Application】Misting cooling system widely apply for garden, trampoline water park, landscaping, greenhouse, humidification, outdoor cooling system, epidemic prevention, spraying disinfectant, deodorant air purification, swimming pool misting fog cooling, mist mosquito system and so on
H&G lifestyles Misters for Patio Misting System 26.2FT (8M) Misting Line 10 Brass Mist Nozzles Brass Adapter for Patio Garden Umbrellas Greenhouse Trampoline
- ★ 2019 Upgrade High Quality : Water mister use of precision brass misting nozzle ,made with high quality UV treated flexible tubing, resistant to UV up to 3.5 or more, resistant to yellowing,resistant to hydrolysis, resistant to microbial degradation
- ★ Turn Down the Heat : The fantastic water misters for cooling outdoor provides a cool environment from the heat for your favorite outdoor areas, cools the surrounding air temperatures up to 20 degrees
- ★ Energy conservation : Mister hose directly use tap water to spray and cool down, no electricity consumption, no energy consumption, save more money for you, and be an environmentalist
- ★ Easy to install : Mist cooling Kit completely assembled system Installs in less than 10 minutes, delivers very fine mist to significantly cool the air in the hottest summer weather, mist and save for conditioner
- ★ Wide Application: Outdoor Mister System widely apply for garden, landscaping, greenhouse irragation, humidification, RV Mister , epidemic prevention, spraying disinfectant, deodorant air purification, swimming pool misting fog cooling, misting fan,trampoline sprinkler, mist mosquito system and so on
Why the H&G Lifestyle Mister System is the best choice in patio hose mister Kit?
—-High precision brass misting nozzle keypunch are made of brass with good quality, they are anti-rust,
durable and have a long lifetime
—-Easy to use, No special tools are required, each nozzle with leak-proof, self-sealing ; no need for tape or sealant
—-Brass misting nozzle is the built-in stainless steel wafer through advanced forging process, strong durability, is 2.5 times
the life of similar nozzle
Package included:
1x8M Misting line
1xBrass Adapter
1x shut off valve
10xBrass mist nozzles
KUWAN 0.016" Orifice (0.4mm) Thread UNC 10/24 Brass Misting Nozzles Low Pressure Atomizing Misting Sprayer Water Hose Nozzle for Greenhouse, Landscaping, Outdoor Cooling Mister System (30PCS)
- MATERIAL: The misting nozzles are made of brass with stainless steel orifice, anti-rust, durable, leak-proof, the mister nozzle is best choice for outdoor use with cold water
- DIMENSION: Thread size is UNC 10-24
- Orifice diameter is 0.4mm
- PACKAGE: 30PCS Brass Misting Nozzles For Outdoor Cooling System
- WIDE USAGE: The misting nozzles is widely applied to outdoor cooling system, agriculture irrigation system, green house, spray disinfection, epidemic prevention, deodorizing air purification, landscaping, small fountain, etc
- EASY TO INSTALL: The brass misting nozzles are easy to install, which can be easily screw into any 10/24 UNC threaded mist nozzle opening
Description:
The misting nozzle is made of a sturdy brass with stainless steel orifice.
Widely applied for garden, patio, greenhouses, spraying disinfectant, dust
removal, landscaping, lawn misting systems, artificial fog and other
humidification place. The misting nozzle can use liquid pressure to form a
very fine mist, excellent misting effect, energy and water saving, low
cost, good effect, no leakage
Feature:
The misting performance is excellent. This type of nozzle is applied in
the low pressure for-making
Leak-proof, durable; Excellent mist effectively strengthen humidification
effect, perfect for misting application
Create fine mist droplets that flash evaporate and cool the air almost
instantly
The brass nozzle heads can be easily screwed into any 10/24 UNC threaded mist
nozzle opening
Buyplus Outdoor Mist Cooling System – Misting Line System for Garden Patio Greenhouse Fan Gazebo Irrigation Mister Watering Kit with 10 Brass Nozzles 32.8FT (10M), Water Filters Shut Off Valve
- UPGRADE MIST COOLING SYSTEM: Updated mist cooling system nozzle are made of precision brass, Easy connect,leak-proof and self-sealing Tee Joint ,high quality UV treated flexible tubing, resistant to yellowing hydrolysis and microbial degradation,Durable and resistant to multiple environments
- COOL THE ENVIRONMENT: Animal Plants Swimming Pool Cooler perfect for agriculture mister irrigation and cooling for outdoor,greenhouse, lawn, garden, trampoline for waterpark,patio, swimming pool misting fog cooling.
- SAVING ENERGY AND WATER: Misting cooling system directly use tap water to spray and cool down, no electricity consumption.Up to 70 percent water savings compared to manual watering,release you in the hot summer, The ambient temperature is as low as 20 degrees
- MORE VARIABILITY AND EASY TO ASSEMBLY: Providing you all the accessories you need for a air cooling and mist cooling system,only need 10 minutes to Installs as your idea, Our mist cooling system is free to change the length. If you need to change the length of the tube, you can choose to pull the piston, pull the piston out and replace it with the length you need
- 100% SERVICE SATIFICATION:Give our mist cooler system a try and if you are not 100% thrilled with your purchase, we promise to make it right
Features: ◆Our mist cooling system uses water mist for agricultural irrigation or outdoor cooling.
◆Our mist cooling system is really easy to use,and it also has a lot of variability.
◆Well-made brass atomizing nozzle button and pipe make the product more durable.
◆Our mist cooling system is very effective for cooling down in the summer. Children can play outdoors more easily and happily. Your pet can also be more comfortable this summer.
◆It is an energy-saving that regulates the atomization effect through water pressure.
Package Includes: 1 x filter 1 x switch valve 1 x 10M Misting line 1 x Faucet Connector 10 x Brass mist nozzles 1 x garden hose quick socket
Tips: If you want the fogging effect of this mist cooling system to be more obvious, I suggest you add a water pump to increase the water pressure. If the water contains many impurities, it will lead to plugging of the water tube or mist nozzles. Because the effect of water mist is used to achieve cooling or watering, staying in that area for a long time may make clothes wet. Sunscreen may still be needed for situations with strong sunlight.
Aootech Brass Misting Nozzles for Outdoor Cooling System 22 pcs,0.012" Orifice (0.3 mm) 10/24 UNC
- High Cost Performance:20pcs+2pcs(Extra Bonus)=22pcs.
- High Quality: Made of Brass,Never Rust. Best Choice For Outdoor Use With Cold Water.
- Screw Into Any 10/24-Threaded Mist Nozzle Opening.
- Operation Pressure:20-70kg/Cm. Flow Rate:80-145ml/Min.
- Minimal Water Use Of 1/2 Gallon Of Water Per Hour Per Nozzle.
theBlueStone 40FT Mist Cooling System – 20 Brass Nozzles with in-Line Filter – Misters for Outside Patio Garden Greenhouse Trampoline for Waterpark Pet Deck Cooling
- All parts included – Our Misting System comes with all the accessories needed, you could install it right out of the box
- Easy to assemble – Be sure you press the hose into the fittings all the way and make sure they are seated.
- Great Misting Kit – You will beat the summer and cool off with this awesome misting system outside your home. And it’s also a great Garden Irrigation Kit.
- You could also add a Mist Cooling Pump(not included) to get better mist.
- We provide 30 Days 100% Money Back Guarantee if not satisfied for any reason.
theBlueStone Pre-assemble Brass Misting System Kit
Upgrade your outdoor with the power of mist. The fantastic outdoor cooling system provides a cool environment from the heat for your favorite outdoor areas. Help you beat the summer!
It’s great for:
Agriculture irrigation for flowerbeds, lawn, garden, greenhouse
Swimming pool misting fog cooling
Specifics:
Total Length: 30 feet of Misting Line + 10 feet of Supply Line for connecting to water source
Nozzle Orifice: 0.3mm
Water Flow Rate: 0.8 GPH
Water Range Diameter: 1 feet
Suggested 20 inch spacing between 2 brass nozzles
Maximum Pressure: 200 PSI
Package includes:
1 x 1/4″ PE Tube(ID4mm/OD6.35mm)
1 x Faucet Adaptor
20 x Brass Nozzle Fittings(Tee)
1 x Tube Fittings(to make a misting fan ring)
20 x Brass Nozzles + 1 x FREE Spare Nozzle
15 x Saddle Clamps
15 x Cable Ties
15 x Hanging Snap Clips
1 x Cutter
1 x Filter
1 x User Manual
Assemble Tips:
1. Make sure when you cut the rubber tube, to cut it straight and not at an angle.
2. Be sure you press the tube into the fittings all the way and make sure they are seated.
3. You could try to add a water pump(not included) to get finer mist.
GLANT Misting Cooling System,Misters for outside patio 27FT Misting Line + 11 Brass Mist Nozzle,Patio Misting System For Cooling System,Outdoor Mister for Patio Garden Trampoline Waterpark (27ft (8M))
- UPGRADE HIGH QUALITY: Use of precision brass misting nozzle keypunch, sophisticated production,made with high quality UV treated flexible tubing, resistant to UV up to 3.5 or more, resistant to yellowing,resistant to hydrolysis, resistant to microbial degradation.Supply longer service life
- TURN DOWN THE HEAT: The fantastic outdoor cooling system provides a cool environment from the heat for your favorite outdoor areas, cools the surrounding air temperatures up to 20 degrees
- MULTI FUNCTION: Great for agriculture, lawn, garden, patio, greenhouse ,swimming pool misting fog cooling/irrigation, watering, greenhouse, humidification, balcony cooling, irrigation (watering flowers, grass, vegetables).
- COOLING&SAVE ENERGY: Mist cooling Kit completely assembled system Installs in less than 10 minutes.Quickly cool the surrounding air temperatures to below 20 degrees.Misting cooling system directly use tap water to spray and cool down.Compare with manual watering on irrigation you can save 70% of water.Comparing with air humidification machine it works faster and more efficient
- LIFETIME WARRANTY. We provide 100% satisfaction guarantee for lifetime for our misting system. If you have any questions, feel free to contact us. Our enthusiastic customer service will always here for help. May you have a happy shopping experience
About the GLANT:
After 10 years of scientific research and development,GLANT have become an advanced manufacturer of outdoor products.we focus on the garden products developing and selling,providing the new and qualified products.We are devoted to build a one-stop garden accessories shop.
About the GLANT Misting Cooling System:
a.High precision brass misting nozzle keypunch are made of brass with good quality, they are anti-rust, durable and have a long lifetime
b,Easy to use, No special tools are required, each nozzle with leak-proof, self-sealing O-ring; no need for tape or sealant
c,Brass misting nozzle is the built-in stainless steel wafer through advanced forging process, strong durability, is 2.5 times the life of similar nozzle
Multi Function: Great for agriculture, lawn, garden, patio, greenhouse ,swimming pool misting fog cooling/irrigation, watering, greenhouse, humidification, balcony cooling, irrigation (watering flowers, grass, vegetables).
How it work:
Assemble the connector to the faucet
Turn on the faucet until the misting system working
The nozzles have attached into the tube, it is easy to install your cooling system
EONBON 32pcs/Pack 0.016" Orifice (0.4mm) Thread UNC 10/24 Brass Misting Nozzles Low Pressure Atomizing Misting Sprayer Water Hose Nozzle for Greenhouse, Landscaping, Outdoor Cooling Mister System
- MATERIAL: The misting nozzles are made of brass with stainless steel orifice, anti-rust, durable, leak-proof, best choice for outdoor use with cold water.
- DIMENSION: Thread size is UNC 10-24
- Orifice diameter is 0.4mm.
- PACKAGE: 32PCS Brass Misting Nozzles For Outdoor Cooling System.
- WIDE USAGE: The misting nozzles is widely applied to outdoor cooling system, agriculture irrigation system, green house, spray disinfection, epidemic prevention, deodorizing air purification, landscaping, small fountain, etc.
- EASY TO INSTALL: The brass misting nozzles are easy to install, which can be easily screw into any 10/24 UNC threaded mist nozzle opening.
Description:
The misting nozzle is made of a sturdy brass with stainless steel orifice. Widely applied for garden, patio, greenhouses, spraying disinfectant, dust removal, landscaping, lawn misting systems, artificial fog and other humidification place. The misting nozzle can use liquid pressure to form a very fine mist, excellent misting effect, energy and water saving, low cost, good effect, no leakage.
Feature:
The misting performance is excellent. This type of nozzle is applied in the low pressure for-making.
Leak-proof, durable; Excellent mist effectively strengthen humidification effect, perfect for misting application.
Create fine mist droplets that flash evaporate and cool the air almost instantly.
The nozzle heads can be easily screwed into any 10/24 UNC threaded mist nozzle opening.
Conclusion
By our suggestions above, we hope that you can found brass water misters for cooling for you.Please don’t forget to share your experience by comment in this post. Thank you!
