minmommy 
Nowadays, there are so many products of baseboard hot water heat trim in the market and you are wondering to choose a best one. You have searched for baseboard hot water heat trim in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings baseboard hot water heat trim which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
38,810 Reviews Scanned
Slant Fin Revital/Line Aluminum Baseboard Heater Cover Complete Replacement Kit with 2 End Caps – Available in Sizes 2-6 Feet – Maximum Heat Output, Brite White
- COMPLETE REPLACEMENT KIT- Replace your aging baseboard cover and transform the look of any room in minutes with the Revital/Line full baseboard heater cover kit. Includes 1 durable aluminum replacement baseboard cover and 2 galvanized steel 4″ end caps (left and right)
- MAXIMUM HEAT OUTPUT- The Slant/Fin replacement baseboard covers are lab tested to provide you with up to 40% more heat output than other competing replacements. Heats your rooms more efficiently saving you energy and money
- DURABLE RECYCLED ALUMINUM- Made from 100% recycled rust-proof extruded aluminum and beautifully powder coated in brite white for a durable, enamel-like finish. Give your baseboard heaters a sleek and modern look with a replacement heater cover that is built to last
- EASY TO INSTALL- Designed to fit hydronic baseboards measuring up to 8.5″ H x 3″ D allowing them to fit over 90% of standard residential hydronic baseboard heaters. No tools needed for most installations – remove old front panel and damper then simply slip the pre-cut cover over the existing back panel and that’s it!
- HYDRONIC BASEBOARDS ONLY- The Revital/Line baseboard heater covers can be used on ONLY hydronic (hot water) heaters. DO NOT use on an electric baseboard heating system. All Slant/Fin products are proudly made in the USA
Slant/Fin Revital/Line Aluminum Replacement Baseboard Heater Cover Kit with 2 End Caps
A quick and easy solution for your old aging baseboard covers! Breathe new life into your baseboard and give any room a sleek and modern feel.
Why Slant/Fin Revital/Line Baseboard Covers?
America’s #1 Baseboard Brand – We have been providing you with the highest-quality heating system products since 1949. All made right here in the USA
Features:
Revitalize and makeover any room in your home… quickly and easily… with a pre-cut, snap-in-place baseboard cover.
- Made from durable, rust-proof extruded aluminum material that is built to last your baseboard heating system for years and years
- Standard color is Brite White
- Powder coated with an enamel-like finish – A perfect makeover for any aging baseboard
- 6.25″ H x 3″ D with available lengths: 2′, 3′, 3.5′, 4′, 5′ and 6’
- A new Revital/Line heat cover will provide you with up to 40% more heat output than other competitive brands
- Easy removal for easy cleaning
Easy To Install:
Slant/Fin’s Revital/Line pre-cut replacement covers will fit 90% of standard hydronic baseboards measuring up to 8.5″ H x 3″ D. Fits both Slant/Fit baseboard and other competitors!
Designed to snap over your existing back panel with no tools required.
- Measure your current baseboard and choose the correct size you need
- Remove the old accessories: front panel and damper
- Slip on the new baseboard cover and you are ready for full energy efficient heat!
***USE FOR HYDRONIC (HOT WATER) BASEBOARD HEATERS ONLY***
Similar items with 4 stars and above
NeatHeat Baseboard Covers Right End Cap
- Easy install – does not require any special tools
- One size fits most – fits over many common baseboard brands
- End caps and other accessories sold separately
- Not for electric baseboard
- Note: Kindly verify with the measuring guide if the item fits the system
Rec30/07 BW features: Product type: Cover/trim/grill. Finish: Bright white. Material: Plastic. Country of manufacture: United states. End cap. Has no sharp corners. Inexpensive and can be easily retrofitted to existing baseboard heating units. It will never rust. Can be cleaned using common household cleaners. Effectively protects occupants from potentially hazardous conditions. Dimensions: Overall height top to bottom: 7. 75″. Overall width side to side: 2. 5″. Overall depth front to back: 3″. Overall product weight: 0. 25 lbs.
NeatHeat Baseboard Cover Inside Corner (90 Degree)
Neatheat Inside Corner Baseboard Front Cover – NHIC Features: Construction: PlasticHeight Inches: 7-7/8Length Inches: 6-5/8Type: Inside CornerWidth Inches: 3
4 Inch End Cap Only for Slant/Fin Revital/Line Baseboard Heater Replacement Covers in Brite White
- SLANT/FIN REVITAL/LINE ONLY- End Cap exclusively for Revital/Line Baseboard Replacement Covers. DO NOT use with other baseboard covers. All Slant/Fin products are proudly made in the USA
- DURABLE GLAVANIZED STEEL – Made from galvanized steel and beautifully powder coated in brite white for a durable, enamel-like finish. Give your baseboard heaters a sleek and modern look with a replacement heater cover system that is built to last
- MAXIMUM HEAT OUTPUT- The Slant/Fin replacement baseboard covers are lab tested to provide you with up to 40% more heat output than other competing replacements. Heats your rooms more efficiently saving you energy and money
- EASY TO INSTALL- No tools needed for most installations – after installing your Slant/Fin Revital/Line cover the end caps simply snap onto the ends! The side (Right/Left) refers to the sealed side of the End Cap, so the right End Cap goes on the right side of the cover when facing the baseboard.
- TELESCOPING DESIGN – allows for expansion of up to 1.5” from the end of the cover for each 2-Inch End Caps and up to 3.5” for each 4-Inch End Cap.
Slant/Fin Revital/Line Replacement Baseboard Heater Cover System
A quick and easy solution for your old aging baseboard covers! Breathe new life into your baseboard and give any room a sleek and modern feel.
Why Slant/Fin Revital/Line Baseboard Cover System?
America’s #1 Baseboard Brand – We have been providing you with the highest-quality heating system products since 1949. All made right here in the USA
Features:
Revitalize and makeover any room in your home… quickly and easily… with a pre-cut, snap-in-place baseboard covers and accessories.
- End Caps are made from galvanized steel and when combined with a Revital/Line cover your baseboard heating system is built to last for years and years
- Standard color is Brite White
- Powder coated with an enamel-like finish – A perfect makeover for any aging baseboard
- Available in sizes: 2-Inch and 4-Inch
- A new Revital/Line replacement cover system will provide you with up to 40% more heat output than other competitive brands
- Easy removal for easy cleaning
Easy To Install:
Slant/Fin’s Revital/Line pre-cut replacement covers will fit 90% of standard hydronic baseboards measuring up to 8.5″ H x 3″ D. Fits all of Slant/Fit baseboard and other competitors!
End Caps are designed to snap over your Revital/Line Baseboard Cover with no tools required.
***USE FOR HYDRONIC (HOT WATER) BASEBOARD HEATERS ONLY***
Similar items with 4 stars and above
NeatHeat Baseboard Heat Cover Splice Plate
SP30/07 bow features: Product type: Cover/trim/grill. Finish: Bright white. Material: Plastic. Country of manufacture: United States. Splice plate. Has no sharp corners. Inexpensive and can be easily retrofitted to existing baseboard heating units. It will never rust. Can be cleaned using common household cleaners. Effectively protects occupants from potentially hazardous conditions. Dimensions: Overall height top to bottom: 6. 5″. Overall width side to side: 2″. Overall depth front to back: 3″. Overall product weight: 0. 25 lbs.
Slant/Fin Revital/Line Aluminum Baseboard Heater Replacement Cover in Brite White
- DURABLE RECYCLED ALUMINUM- Made from 100% recycled rust-proof extruded aluminum and beautifully powder coated in brite white for a durable, enamel-like finish. Give your baseboard heaters a sleek and modern look with a replacement heater cover that is built to last
- TRANSFORM YOUR ROOM- Replace your aging baseboard cover and transform the look of any room in minutes with the Revital/Line replacement baseboard heater cover available in 2’, 3’, 3.5’, 4’, 5’ and 6’ lengths
- MAXIMUM HEAT OUTPUT- The Slant/Fin replacement baseboard covers are lab tested to provide you with up to 40% more heat output than other competing replacements. Heats your rooms more efficiently saving you energy and money
- EASY TO INSTALL – Designed to fit hydronic baseboards measuring up to 8.5″ H x 3″ D allowing them to fit over 90% of standard residential hydronic baseboard heaters. No tools needed for most installations – remove old front panel and damper then simply slip the pre-cut cover over the existing back panel and that’s it!
- HYDRONIC BASEBOARDS ONLY- The Revital/Line baseboard heater covers can be used on ONLY hydronic (hot water) heaters. DO NOT use on an electric baseboard heating system. All Slant/Fin products are proudly made in the USA
Slant/Fin Revital/Line Aluminum Replacement Baseboard Heater Cover
A quick and easy solution for your old aging baseboard covers! Breathe new life into your baseboard and give any room a sleek and modern feel.
Why Slant/Fin Revital/Line Baseboard Covers?
America’s #1 Baseboard Brand – We have been providing you with the highest-quality heating system products since 1949. All made right here in the USA
Features:
Revitalize and makeover any room in your home… quickly and easily… with a pre-cut, snap-in-place baseboard cover.
- Made from durable, rust-proof extruded aluminum material that is built to last your baseboard heating system for years and years
- Standard color is Brite White
- Powder coated with an enamel-like finish – A perfect makeover for any aging baseboard
- 6.25″ H x 3″ D with available lengths: 2′, 3′, 3.5′, 4′, 5′ and 6’
- A new Revital/Line heat cover will provide you with up to 40% more heat output than other competitive brands
- Easy removal for easy cleaning
Easy To Install:
Slant/Fin’s Revital/Line pre-cut replacement covers will fit 90% of standard hydronic baseboards measuring up to 8.5″ H x 3″ D. Fits both Slant/Fit baseboard and other competitors!
Designed to snap over your existing back panel with no tools required.
- Measure your current baseboard and choose the correct size you need
- Remove the old accessories: front panel and damper
- Slip on the new baseboard cover and you are ready for full energy efficient heat!
***USE FOR HYDRONIC (HOT WATER) BASEBOARD HEATERS ONLY***
Broan 114 Kickspace Fan-Forced Wall Heater Without Built-in Thermostat, White
- White grille has a baked enamel finish and one-piece design for durability
- Vertical louvers disperse heat evenly across the width of the grille
- Control temperature with optional line voltage thermostat (Model 86W) or timer (Models 59V or 59W 60-minute timer or Models 61V or 61W 15-minute timer) for a simple and convenient way to control the heater
- No extended warm up time due to an efficient steel sheathed, plate-finned heating element that provides comfortable heat in seconds.Quiet, thermally protected motor shuts off in event of overheating and transverse blower circulates heated air for optimal room warming
- Housing width:18 inch
Product Description
Kickspace heaters have a low-profile design that provides floor-level heat from an out-of-the-way location. Great idea for light-commercial applications such as ticket/toll booths or checkout counters where ducting isn’t possible. Factory wired at 1500W at 240VAC can be easily converted to 750W or 1500W at 120V for added versatility. White grille has a baked enamel finish and one-piece design for durability. Vertical louvers disperse heat evenly across the width of the grille. Control temperature with optional line voltage thermostat (Model 86W) or timer (Models 59V or 59W 60-minute timer or Models 61V or 61W 15-minute timer) for a simple and convenient way to control the heater. Integral thermostat kit (Model 90) also available. No extended warm up time due to an efficient steel sheathed, plate-finned heating element that provides comfortable heat in seconds. Quiet, thermally protected motor shuts off in event of overheating and transverse blower circulates heated air for optimal room warming. UL Listed for safety. Slim design tucks under cabinet kickspaces, vanities, stairways or any place where space is limited and a little extra heat is desired to make your environment cozier. Kickspace heaters are intended to provide supplemental heat from a wall location and not to take the place of a home’s main heat source.
From the Manufacturer
Since 1932, Broan-NuTone LLC has led the industry with forward-thinking residential ventilation products, unsurpassed built-in convenience products and superior customer service. While global expertise plays a critical role in Broan-NuTone’s ability to being able to meet and exceed the needs and desires of homeowners and designers alike, Broan-NuTone is very proud of the fact that over 80 percent of their products sold in the United States are designed, engineered and manufactured in the United States with U.S. and imported parts. Manufacturing operations in the United States are located in Hartford, Wisconsin and Cleburne, Texas, with customer and technical services located in Hartford and in Cincinnati, Ohio. Broan-NuTone is committed to developing revolutionary products that improve the indoor environment as well as implementing procedures to preserve the outdoor environment. Broan is the industry leader of range hoods, ventilation fans, heater/fan/light combination units, Indoor Air Quality (IAQ) Fresh Air Systems, built-in heaters, whole-house fans, solar powered attic ventilators and trash compactors. NuTone holds major market positions in door chimes, central vacuum systems, stereo intercom systems, home theater speakers, medicine cabinets, ironing centers, ceiling fans and ventilation fans. BEST range hoods are the “Ultimate in Kitchen Ventilation” featuring state-of-the-art performance and Italian design.
14"w X 8"h Steel Return Air Grilles – Sidewall and Ceiling – HVAC Duct Cover – White [Outer Dimensions: 15.75"w X 9.75"h]
- 14″w X 8″h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 15.75″ Width X 9.75″ Height – SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
- HIGH QUALITY Solid Stamped Steel Construction With Recessed Screw Holes (SCREWS INCLUDED) To Easily Install On Ceiling Or Sidewall
- QUALITY PACKAGING – Carefully Shrink Wrapped With Solid Cardboard Backing To Prevent Damage In Shipment – Hand Inspected for Quality
- HEAVY STEEL CONSTRUCTION – No Scuff Powder Coat Finish – Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
- UNRESTRICTED AIRFLOW For Your HVAC System – 50° Angled To Provide Maximum Airflow – ½ Inch Spaced Fins
HVAC Premium has been providing superior in quality service for many many years. Our products are second to none, and we’ve helped numerous contractors,
DIY projects, and home improvement remodeling specialists complete their masterpiece. If you are looking for a top of the line unit to enhance your project
look no further than HVAC Premium. We have the largest selection of Grilles Registers and Diffusers.
HVAC Premium has sold over 5,000,000 Grilles – We are proud of our many happy customers!
14″w X 8″h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 15.75″ Width X 9.75″ Height – SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that are visible to your family members and house guests.
This grille has a high standard of design, production and finish on all products.
How To Measure A Grille
Overall Size: MEASURE the size of the DUCT OPENING. Do not measure the old vent cover. If your duct opening is 14″ wide by 20″ tall, order a 14×20.
Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20″ wide by 14″ tall, order a
20×14. If your hole is 14″ wide by 20″ tall, order a 14×20.
100% Satisfaction Guaranteed
Don’t worry, you’re covered by our 100% moneyback guarantee no questions asked. Click Add to Cart Now! and enjoy a new updated refreshing look to your home.
Cleaning Accessories – Industrial Brush – Baked on Food Remover – Electric Smoker – Smokers and Grills – Drill Brush – BBQ Cleaning Kit – Rust Remover – Hard Water, Calcium, Mineral, and Stain Remover
- Common applications include cleaning BBQ grills, smoker grates, or oven racks of baked-on food and heavy grease deposits. Use outside for restoration of brick and mortar by removing rust, hard water or mineral stains. These brushes can also be used for industrial applications such as heavy duty stripping of loose paint and other harsh scrubbing applications. Erase stubborn painted graffiti from stone walls or metal surfaces.
- Clean your gas grill, smoker, oven, or charcoal grates with this no-wire kit. Our brushes have NO WIRES and are much SAFER: “A number of surgeons recommend that wire brushes not be used to clean barbecue grills. In some cases, bristles break off the brush which then become deposited in food cooked on the grill. Ingestion of these bristles can cause gastrointestinal perforation.”
- Modernize your arsenal of old-fashioned wire brushes that never get clean and tend to rust as well. Replace all your wire brush drill attachments with these aggressive, Ultra Stiff Black, all nylon, drill powered upgrades. No more broken and loose flying wires to deal with.
- All brushes feature a rugged steel, quarter-inch, quick-change shaft to fit most all drills and drivers.
- All Drillbrush Products have a 90 day no questions asked Money back Guarantee. If you are not completely satisfied with our product we will issue a full refund or ship out a replacement at the buyer’s request. Cordless Drill NOT included.
This kits brushes have super stiff and aggressive nylon bristles for the removal of stains on concrete, brick or stone. The large diameter brush is especially useful for larger de-scaling projects on metal surfaces or removal of loose paint. This brush has very stiff bristles and is NOT recommended for fabric, carpet, or where scratching could be an issue.Cordless drill NOT included
8.7mm Click Lock Luxury Vinyl Plank 100% Water Proof w/EVA underpad: 23.64sqft($4.60/sqft)
- 8.7mm thick /WPC /Click Lock /100% Water Proof/Mold resistant
- Superior wear and scratch protection with a 0.7 mm (28 mil) wear layer and UV coating. Residential Lifetime Warranty PLUS One transfer
- Commercial 20 year Warranty
- Acoustic underlayment attached: 2mm grey eco-friendly EVA based foam material
- feels like rubber, bounces back like memory foam. Quiet and comfortable with sound and thermal insulation
- High density top vinyl layer provides your heavy furniture and rolling chairs with strong support
- FloorScore certified
The Protech Luxury Vinyl Planks – 8.7 mm WPC Click Lock – Contemporary Collection is FloorScore certified, and 100% waterproof. These vinyl planks offer superior wear and scratch protection with a 0.7 mm (28 mil) wear layer and UV coating. The attached underlayment provides acoustic, sound and thermal insulation, and hides subfloor imperfections, allowing minimal preparation for most subfloors during installation.
This floor, the Weathered, is one of the most popular ones on the market. It is an intricate blend of the popular grey and has streaks of warm colors, making it easy for color coordination with your furniture. It represents Heritage Grade oak, which displays the wood’s natural medley of color and character, and features all of wood’s natural features: color variation, mineral streaking, small surface knots, and large filled knots that can be up to two inches in diameter. This creates a floor that is full of visual texture and makes it a great product for those who want an extraordinary and diverse floor. The medium embossed surface, with the fusion of shades and tones, looks and feels like real Heritage Grade hardwood and is easy to maintain. It has the lucid beauty of natural wood, but without the potential problems of wood floor’s cracking or warping.
Return:Buyer responsible for return shipping costs
SPECIFICATIONS Installation Type: Click Lock
Core Type: WPC
Underpad EVA Foam Thickness: 2mm
Dimension of plank: 7inx48inx8.70mm
Wear Layer Thickness: 0.7mm (28 mil)
Gloss Level: Low-Gloss
Texture Detail:Woodgrain Embossed
Edge Type: Micro Beveled Edge
Grade: Above and Below Grade
Certification: FloorScore
Absorption: 100% Waterproof
Residential Warranty: Life Time Plus One Ownership transfer
Commercial Warranty: 20 yrs
Country of Origin: China
Weight each box: 36lb
10 planks per box
Sqft per Box: 23.64sqft
Similar items with 4 stars and above
Conclusion
By our suggestions above, we hope that you can found baseboard hot water heat trim for you.Please don’t forget to share your experience by comment in this post. Thank you!
