minmommy 
Nowadays, there are so many products of anode rods for hot water heaters in the market and you are wondering to choose a best one. You have searched for anode rods for hot water heaters in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings anode rods for hot water heaters which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
49,965 Reviews Scanned
Magnesium Anode Rod, Magnesium Flexible Water Heater Anode Rod by Podoy for Hot Water Heaters 3/4 inch NPT Thread, Hex Plug, 44” Long & 0.8” Diameter
- ★ ADVANTAGES OF MAGNESIUM ANODE RODS – Magnesium anode rods produce a stronger current than Aluminum rods making them more effective at keeping the water tank from corroding.
- ★ EXTEND LIFE OF YOUR WATER HEATER: Magnesium anode rod gets corroded faster than tank of water heater. Usually you should check magnesium anode rod every 2 years.
- ★ FLEXIBLE DESIGN – This 44 Inch-long rod is hinged into four parts. Each part is less than 12 Inches allowing you to replace anode rodes easily even in a narrow space. Just safely cut it shorter with a simple hacksaw.
- ★ CORROSION PROTECTION: Replacing your anode rod at regular intervals may increase the life of your water heater, saving you money, time and the inconvenience of having to replace your water heater.Anode rod is expected to provide about two years of corrosion protection.
- ★ FITS: Almost all water heaters including
- Rheem, Reliance, Richmond, Kenmore, State, GE and many more that also use the standard ¾” NPT Anode Rod Connection.
A long metal “anode rod” that attracts corrosive elements in the water. When the rod itself becomes so corroded that it can no longer do its job, the tank soon rusts out, leaks and needs replacement. However, if you replace your water heater anode rod before it fails, about every tow years, you can double the life of your water heater.
How to replace your Water Heater Anode Rod?/
Step1: Before you get started, close the shutoff valve, turn on the hot water at a faucet to relieve pressure, and turn off the electricity or gas to the heater. Open the drain valve near the bottom of the tank and drain out several gallons of water. Caution: The water is hot!
Step2: Drain some water from the tank to check for rust. It’s time for a new water heater if you see rusty flakes (not just orange water, which can come from corroded pipes or well water). If the water is clean, remove the rod to check its condition.
Step3: To loosen the rod, you’ll need an air compressor, a 1/2-in.-drive impact wrench and a 1-1/16-in. Even with a breaker bar, it can be nearly impossible to break the anode rod free.
Step4: Turn off the power or gas. Then close the cold-water valve at the top of the tank and drain off several gallons. Loosen the hex head with the impact wrench, but unscrew it the rest of the way by hand.
Hint:
The hex head may be under a plastic cap. Uncover it, then pull it up and out to check its condition. When the threads break free, stop turning and look for water around the hex head. If you see leakage, drain the tank further. If you don’t have enough overhead clearance to pull the rod out of the tank, bend it as you remove it.
Magnesium Flexible Water Heater Anode Rod- Magnesium Anode Rod for Hot Water Heaters, 44 Inch Long, 0.8 Inch Diameter, 3/4 Npt Thread, Including 1-1/16 Inch Hex Socket Tool and Teflon Tape
- MAGNESIUM ANODE ROD-LONG LASTING USE: This heater anode rod is made of high-quality magnesium that is specifically designed to provide long-lasting use and collect contaminants from water hearts.
- EXTEND SERVICE LIFE OF WATER HEATER: Hot water tanks are made of steel which is very corrosive when exposed to water. Based on the electromotive series of metals we know that magnesium will corrode before the steel in your hot water tank. In this way, it can extend the service life of your water heater.
- ADVANTAGES OF MAGNESIUM ANODE RODS COMPARED TO ALUMINUM RODS: The metallic activity of Magnesium anode rod is stronger than that of Aluminum anode rod. That means Magnesium anode rod is more effective at keeping the water tank from corroding.
- FLEXIBLE DESIGN FOR TIGHT AREAS: This 44 Inch-long magnesium rod is hinged into four segments, less than 12 Inches long each, so it is easy to place it into the tight areas of water heaters.
- KIT INCLUDED: 1) 44 Inch-long magnesium rod, 3/4 NPT Thread makes it compatible with most water heater. 2) 1-1/16″ Hex Socket Tool , help you to replace the anode rod. 3) Teflon Sealing Tape
magnesium anode rod for water heater
Analyzing from a Chemical Perspective, magnesium is more active than aluminum and zinc, so magnesium is more suitable as an anode to protect your water heater.
Besides, Magnesium ions won’t cause any harm to your skin.
Parameters:
Length: 44 inches/ 1100mm
Diameter: 0.8″ /21mm
3/4″NPT thread
Net Weight of the anode rod: 660g
Material: Magnesium
Application:magnesium anode rod for water heater
Packaging List:
Magnesium Anode Rod * 1
1-1/16″ Hex Socket Tool *1
Teflon Sealing Tape * 1 roll
About Fluid | Aluminum Zinc Flexible Anode Rod KIT for Water Heaters | INCLUDES1-1/16" DEEP WELL SOCKET | Brass Cap | Teflon Tape | 44 Inches Long | GETS RID OF STINKY ROTTEN EGG SMELLING WATER!
- FITS: Almost all water heaters including
- Rheem, Reliance, Richmond, Kenmore, State, GE and many more that also use the standard ¾” NPT Anode Rod Connection. The INCLUDED 1-1/16” Deep Well Socket will fit and remove your old anode rod and install your new anode upgrade. You can be certain that you won’t have any leaks by using the INCLUDED Full Roll of Pipe Sealing Teflon Tape. The Large Roll of Teflon Tape leaves you with plenty left over for the next time you check your anode rod’s condition.
- GET RID OF THE EMBARRASSING ROTTEN EGG SMELL IN YOUR HOME with our Aluminum / Zinc Anode Rod! Did you know that the magnesium anode rod inside your hot water tank is the number one key contributor to the production of your smelly, hydrogen sulfide gas? About Fluid solved this problem by creating a flexible anode rod made from an Aluminum/Zinc Alloy, instead of magnesium. This unique alloy works everyday, controlling and killing the bacteria responsible for the sulfur and rotten egg smelling gas.
- LEARN FROM PROFESSIONALS using our Easy-To-Follow, Step-by-step instructions. Our Licensed Plumbers and Instructors have decades of experience. They gathered together and documented exactly how they install anode rods, and we have included every step in our manual. Our Instructions are written by Plumbers and translated for everyday problem-solvers like you. The Brass Cap is there to place on your drain, after you’re done, just to be certain your floors are always dry.
- WATER HEATER INSTALLED IN A TIGHT SPACE? Even if your water heater is located in a small or tight space, this 44 Inch-long rod is hinged into four segments, less than 12 Inches long each. Each segment can be easily lowered, one-by-one, into your water heater. If the over-all length is a little too long(rare cases), just safely cut it shorter with a simple hacksaw. All you provide is a ½ Inch Ratchet or Breaker Bar, a few common hand tools, a friend and your favorite beverage! (not included).
- CHANGE THE ANODE ROD, NOT THE WATER HEATER.The anode rod in your water heater is designed to decay instead of your Water’s Heater Tank itself. Eventually, the anode rod is completely consumed (usually just before your water heater warranty is up) and the Water Heater Tank begins to decay and ultimately rusts,fails,cracks and leaks. This is why maintaining the anode rod (by checking and or replacing every 2 years) in your water heater insures the anode rod decays, and not your water heater!
YOU’VE GOT THIS!
WE’LL WALK YOU THROUGH EACH EASY STEP.
1. FITS: Most water heaters including Rheem, Reliance, Richmond, kenmore, State, GE, and many more that use this HEX TYPE (6-sided top that looks like a bolt) ¾”or 0.80” diameter anode.
2. EASY-TO-FOLLOW, STEP-BY-STEP INSTRUCTIONS. Do It Yourself Instructions, written by plumbers and translated for everyday problem solvers like you.
3. WIN THE WAR ON SMELLY WATER! Never have to explain that smell again!
4. ELIMINATE HYDROGEN SULFIDE GAS. Just replace your existing magnesium anode rod with the About Fluid Aluminum/Zinc rod and eliminate that rotten-egg-smelling, hydrogen sulfide gas, in your hot water.
5. EVERYTHING YOU NEED IS INCLUDED FOR EASY INSTALLATION. This Complete Kit includes all-four necessary components:(1) Aluminum/Zinc Flexible Anode with a ¾ Inch diameter and 44 Inches long, capped with the standard ¾ NPT hex plug (2) Heavy-duty, ½ Inch Drive, 1-1/16” Deep-Well Chrome Vanadium Socket Tool (3) Large roll of Teflon Tape and(4) the Brass Cap for your drain valve. All you provide is a ½ Inch ratchet or breaker-bar.
6. YOU CAN REST ASSURED YOU HAVE THE RIGHT SOCKET. This complete kit INCLUDES the 1-1/16” Socket required for this Anode upgrade.
7. NO LEAKS! Be certain that you won’t have any leaks by using the INCLUDED Full Roll of Pipe Sealing Teflon Tape. The Large Roll of Teflon Tape leaves you with plenty left over for the next time you check your anode rod’s condition.
8. NO DRIPS! We included a Brass cap you can thread onto your drain after your done, just to be sure your floor is always dry.
9. SAVE YOUR TANK AND SAVE $. This sacrificial anode rod will decay instead of your hot water tank. That’s it’s job!
10. INSTALLS-ANYWHERE-DESIGN Using flexible, hinged short sections that are lowered one-by-one into the water heater.
RV Water Heater Magnesium Anode Rod Set – 2-Piece Kit Water Heater Anode Rods with PTFE Tape – Compatible with Suburban and Mor-Flo Water Heater Tanks – 9.25" Length ¾" NPT Threads
- WHAT YOU NEED: If you’re using a water heater tank, you should keep in mind that its interior is always subjected to the corrosive action of oxygen and other elements. In order to prolong its life and save your money and time, we offer the perfect solution!
- SAFETY COMES FIRST: These RV water heater anode rods are made from superior quality, extra-durable magnesium guaranteed to withstand the test of time. Unlike classic aluminum zinc rods, our products are 100% for the entire family!
- COMPATIBILITY: These magnesium anode rods are 9.25” long, come with ¾” NPT threads and are compatible with Suburban and Mor-Flo water tanks. The rods use a 1-1/16 inch socket.
- LONGER LIFE: These water heater magnesium anode rods work better than aluminum ones in attracting corrosive elements, protecting your water heater and prolonging its life span with little to no investment.
- GREAT DEAL PACKAGE: This practical RV water heater kit includes 2 magnesium anode rods and a BONUS PTFE tape, all set for fixing up your water heater tank and optimizing its functionality!
Small part, Big Impact
Are you tired of spending enormous amounts of money and energy with expensive
fixing procedures of your water tank? Would you like to avoid unpleasant and unforeseen
investments when it comes to your water heating sources? You’ve come to the right place!
Why is this product for you?
This 2-piece anode rod set is made from top-quality magnesium which is non-toxic and entirely
safe for the human body! The high absorption rate of corrosive elements makes it a better choice
than aluminum, keeping your water tank in perfect functioning condition for years. Plus, with
a bonus PTFE tape included, the installation process is easy for anyone
Some of the amazing features of this product:
- Set includes: 2 anode rods, 1 PTFE tape;
- Dimensions: 25″ Length ¾” NPT Threads;
- Uses 1-1/16 inch socket;
- Compatible with Suburban and Mor-Flo models;
- Material: magnesium;
- Safe for humans.
Add to cart now and reap all the benefits this RV Water Heater Magnesium Anode Rod Set has to offer!
Blue Lightning 79098 Residental Magnesium Flexible Anode Rod, Hex Plug, 44-Inch
AO Smith 100108260 Aluminum Anode Rod
Product Description
Replacement 3/4 In. x 29 In. anode rod for Reliance water heaters.
From the Manufacturer
Anode rods protect the water heater tank from corrosion.
44 Inch Flexible Aluminum Zinc Anode Rod, Eau Get Rid of Rotten Egg Smelling Water Heater Anode Rod for GE, Rheem, Reliance, Richmond, Kenmore Water Heater Including 1-1/16" Hex Socket Tool and Teflon
- GET RID OF ROTTEN EGG SMELL – Aluminum Zinc Alloy sacrificial anode rod made of high-quality Aluminum Zinc Alloy that is key element for permanently eliminate rotten egg smell from water tank.
- SIZE – Flexible 44 Inch-long anode rod is hinged into four parts. Each part is less than 12 Inches allowing you to replace anode rods easily even in a narrow space. Just safely cut it shorter with a simple hacksaw.
- ALUMINUM ZINC ANODE ROD KIT – The best choice to extending service life of your water heater tank from corroding is replacing water rod! This water heater anode rod makes it simple with everything you need, Anode Rod, Teflon Sealing Tape and 1-1/16” chrome finished socket, all in one box.
- FITS – Almost all water heaters including
- A.O. smith,Rheem, Reliance, Richmond, Kenmore, State, GE and many more that also use the standard ¾” NPT Anode Rod Connection.
- REPLACEMENT EASILY – Anodes are designed to be easily and regularly replaced. Their only purpose is to decay instead of your water heater, and that’s exactly what it will do. As soon as the anode rod is depleted and fully decayed, the water heater begins to rust, then crack, fail and leak. Inspecting and changing your anode rod every 2 years will keep your water heater’s tank, strong reliable and off your mind!
Water Heater Anode Rod Flexible Segmented- Kit with Magnesium 44" Anode Rod, 1-1/16" Socket, Teflon Tape, Instructions – for 30-80 Gallon Tanks
- Want AN EVEN BETTER ANODE? Try our: https://amzn.to/39r6Ibd
- Water Heater Anode Rod Flexible Design Fits gas and electric water heater sizes 30-80 gallons, and allows for installation with clearance of 10” above water heater.
- PRE-APPLIED THREAD SEALANT ensures NASA-grade watertight seal under high heat and high pressure (no clogged plumbing due to shredded teflon tape!) We still include teflon tape in case you are skeptical! NSF 61-approved.
- HIGH PURITY MAGNESIUM Water Heater Anode: An essential element for the body, provides superior protection to your water heater.
- 1-1/16″ TRI-DRIVE SOCKET SAVES YOU MONEY! You can use 1/2″, 3/4″, or 1″ square drives with the socket, eliminating the need to purchase adapters or socket sets. Often the old anode requires use of an impact driver to remove, and this socket has you covered!
The STOLTCO flexible magnesium anode kit is the perfect solution for home anode replacement. It includes a patent-pending socket which allows use of multiple size square-drive inputs (including 3/4″ and 1″ pneumatic) which makes the job fast, easy, and cost-effective for you! Pre-applied thread-sealant eliminates the need to use teflon tape, although we include the tape for the skeptics out there. Don’t want this great-value kit? –please see our other products, as we sell just the anode as well. Thanks!!
Corro-Protec CP-R Water Heater Powered Titanium Anode Rod (40-80 Gallon Tank) – Eliminate Odor (Sulfur/rotten egg smell), Corrosion and Reduce Limescale
- Say Goodbye to Odors – Eliminate your water heat odor problem by removing the rotten egg smell caused by hydrogen sulfide with our advanced powered anode rod.
- Permanent Corrosion Protection – Designed to replace your 40-80-gallon water heater’s hex head anode rod, it can help defend against any level of water hardness.
- Energy Efficient Design – By reducing mineral accumulation on the tank it can help improve the water quality while reducing stress on the tank to reduce energy costs.
- Quick and Easy Installation – We’ve included an easy-to-follow paper and step-by-step online PDF instructions to make installing your anode rod much easier.
- North American Quality – Manufactured right here in North America, our hot water heater anode rod not only extends the life of your tank but is backed by a 20-year warranty.
Osring Flexible Water Heater Anode Rod 44 Inch with Aluminum Zinc Hex Head, Triple Defense Against Water Odor and Inner-Wall Corrosion, Including Teflon Tape
- Sacrificial anode rod for water heater tank is made from aluminum-zinc alloy, strongly curing the smell of rotten egg in hot water.
- Efficiently eliminating rotten egg smell in hot water caused by hydrogen sulfide gas (H2S) and extending service life of your water heater tank.
- Hex plug anode rod with 4/5” diameter has standard 3/4” NPT thread connection. Perfect for most of water heaters, such as Rheem and Richmond!
- Segmented flexible design keeps water anode rod can be cut to the right length to fit different sizes of heaters, for easy installation with Teflon tape provided!
- Easy to replace the anode rod by taking the hex head out and putting the new one into water heater tank. Not recommended when water softener is in use!
Does Your Water Stink Like Rotten Eggs?
If your water smells like sulfur / rotten eggs, it could be caused by sulfur bacteria reacting with your water heater tank’s old anode rod.
This reaction results in hydrogen sulfide gas that causing annoying and embarrassing odor, and also corrode your home’s plumbing pipes and prematurely kill your water heater.
Here, We Have the Solution to Your Smelly Water Problem
By replacing your heater’s old anode with Osring Anode Rod, you will put an end to the reaction and the smell.
No More Rotten Egg Smell!
- Sacrificial Anode rod attracts corrosive elements in the water, and gradually the rod become corroded, so the water tank will never rust out.
- Flexible anode rod 44 inch is built in 4 sections, whose the flexibility keeps it easily installed in water heater tank.
- The anode rod allow you to trim the sections to fit the height of any home water heater, Teflon tape provided for installation.
- Please replacing anode rod about every two years to extend service life of water heater tank.
NOTE: Not recommended when water softener is in use!
Buy with confidence! All of our products are backed with a 120-day manufacturer’s money back guarantee!
Conclusion
By our suggestions above, we hope that you can found anode rods for hot water heaters for you.Please don’t forget to share your experience by comment in this post. Thank you!
