minmommy 
Nowadays, there are so many products of american 40 gallon hot water anode rod in the market and you are wondering to choose a best one. You have searched for american 40 gallon hot water anode rod in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings american 40 gallon hot water anode rod which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
28,469 Reviews Scanned
Corro-Protec CP-R Water Heater Powered Titanium Anode Rod (40-80 Gallon Tank) – Eliminate Odor (Sulfur/rotten egg smell), Corrosion and Reduce Limescale
- Say Goodbye to Odors – Eliminate your water heat odor problem by removing the rotten egg smell caused by hydrogen sulfide with our advanced powered anode rod.
- Permanent Corrosion Protection – Designed to replace your 40-80-gallon water heater’s hex head anode rod, it can help defend against any level of water hardness.
- Energy Efficient Design – By reducing mineral accumulation on the tank it can help improve the water quality while reducing stress on the tank to reduce energy costs.
- Quick and Easy Installation – We’ve included an easy-to-follow paper and step-by-step online PDF instructions to make installing your anode rod much easier.
- North American Quality – Manufactured right here in North America, our hot water heater anode rod not only extends the life of your tank but is backed by a 20-year warranty.
Aluminum Zinc Hex Head Flexible Anode Rod (.800" x 3/4" x 44") – Stops Rotten Egg Smelly Water! …
- Sacrificial anode rod for water heater tank made from aluminum-zinc alloy cures rotten egg (sulfur) smell in hot water.
- Replaces water heater tank’s existing magnesium anode rod (hex head only).
- Eliminates rotten egg smell in hot water caused by hydrogen sulfide gas (H2S) and extends service life of water heater tank.
- Segmented flexible design for easy installation
- can be cut to length to fit different size heaters.
- Not recommended when water softener is in use (use a powered anode/cathode instead).
AMERICAN G62-40S40 NAECA COMPLIANT 40 GALLON NATURAL GAS WATER HEATER
40 Gallon Natural Gas Chimney Vented water heater by American Water Heater
American Water Heaters 6911143 Water Heater Pilot Assembly Genuine Original Equipment Manufacturer (OEM) Part
- This part is compatible with models including
- N30S61-303,N50T122-403,BFG6140T403NO,N40T121-403,N50T61-403,N50T61-504,N40T61-343,N40T62-403,N50T91-403,N40T91-403,N40S91-403,N40S61-403,N30T61-303
- Pilot assembly 6911143 supplies the flame for the burner to ignite the gas
- Genuine Original Equipment Manufacturer (OEM) part. Compatible Brands: American Water Heaters
- This pilot assembly (part number 6911143) is for water heaters
- A service technician is recommended for this repair because the gas supply line connections must be checked for leaks after the repair
Genuine Original Equipment Manufacturer (OEM) parts! This pilot assembly (part number 6911143) is for water heaters. Pilot assembly 6911143 supplies the flame for the burner to ignite the gas. A service technician is recommended for this repair because the gas supply line connections must be checked for leaks after the repair. For American Water Heaters.
Powered Anode Rod System 100305721 for A.O. Smith, Reliance, State, American, Whirlpool, and Craftmaster Branded Hot Water Heaters Up to 50 gallons
- The Product Preservers Powered Anode System uses patented adaptive technology that quickly adjusts to your water type providing the precise amount of current needed to deliver the best protection for your water heater tank
- Consistent protection is paramount in maintaining the integrity of the steel water heater tank. Built-in LED fault light and audible alarm provides peace of mind knowing the system is working properly
- Installation is made easy for professionals with a small control box that can plug into any standard 120 volt wall outlet
- Eliminates smelly water issues caused by sacrificial magnesium anodes
- Great for softened water applications
Magnesium Anode Rod, Magnesium Flexible Water Heater Anode Rod by Podoy for Hot Water Heaters 3/4 inch NPT Thread, Hex Plug, 44” Long & 0.8” Diameter
- ★ ADVANTAGES OF MAGNESIUM ANODE RODS – Magnesium anode rods produce a stronger current than Aluminum rods making them more effective at keeping the water tank from corroding.
- ★ EXTEND LIFE OF YOUR WATER HEATER: Magnesium anode rod gets corroded faster than tank of water heater. Usually you should check magnesium anode rod every 2 years.
- ★ FLEXIBLE DESIGN – This 44 Inch-long rod is hinged into four parts. Each part is less than 12 Inches allowing you to replace anode rodes easily even in a narrow space. Just safely cut it shorter with a simple hacksaw.
- ★ CORROSION PROTECTION: Replacing your anode rod at regular intervals may increase the life of your water heater, saving you money, time and the inconvenience of having to replace your water heater.Anode rod is expected to provide about two years of corrosion protection.
- ★ FITS: Almost all water heaters including
- Rheem, Reliance, Richmond, Kenmore, State, GE and many more that also use the standard ¾” NPT Anode Rod Connection.
A long metal “anode rod” that attracts corrosive elements in the water. When the rod itself becomes so corroded that it can no longer do its job, the tank soon rusts out, leaks and needs replacement. However, if you replace your water heater anode rod before it fails, about every tow years, you can double the life of your water heater.
How to replace your Water Heater Anode Rod?/
Step1: Before you get started, close the shutoff valve, turn on the hot water at a faucet to relieve pressure, and turn off the electricity or gas to the heater. Open the drain valve near the bottom of the tank and drain out several gallons of water. Caution: The water is hot!
Step2: Drain some water from the tank to check for rust. It’s time for a new water heater if you see rusty flakes (not just orange water, which can come from corroded pipes or well water). If the water is clean, remove the rod to check its condition.
Step3: To loosen the rod, you’ll need an air compressor, a 1/2-in.-drive impact wrench and a 1-1/16-in. Even with a breaker bar, it can be nearly impossible to break the anode rod free.
Step4: Turn off the power or gas. Then close the cold-water valve at the top of the tank and drain off several gallons. Loosen the hex head with the impact wrench, but unscrew it the rest of the way by hand.
Hint:
The hex head may be under a plastic cap. Uncover it, then pull it up and out to check its condition. When the threads break free, stop turning and look for water around the hex head. If you see leakage, drain the tank further. If you don’t have enough overhead clearance to pull the rod out of the tank, bend it as you remove it.
Blue Lightning 79098 Residental Magnesium Flexible Anode Rod, Hex Plug, 44-Inch
About Fluid | MAGNESIUM Flexible Anode Rod, INCLUDES 1-1/16" Hex Socket, Complete Kit for Water Heaters | Teflon Tape | Hi Temp Brass Cap | Easy-To-Follow, Step-By-Step Instructions | 44 Inches Long.
- ABOUT FLUID’S MAGNESIUM ANODE ROD KIT is the fastest and best choice to prevent your water heater from dissolving itself from the inside out! With the average cost to have a water heater replaced crossing over the $1,400.00 mark, replacing your anode rod is cheap peace-of-mind. This kit makes it simple with everything you need and easy-to-follow, step-by-step instructions, all in one box. Have stinky rotten egg smelling hot water? Search For our About Fluid ALUMINUM / ZINC Anode Rod Kit.
- KIT INCLUDES! (1) HEX-TYPE ANODE ROD, most water heaters use this kit’s ¾ NPT Anode Rod (2) BRASS CAP, just in case you don’t trust your drain valve to shut completely (3) HARD-TO-FIND 1-1/16”, 6-POINT DEEP-WELL CHROME VANADIUM SOCKET, fits both your old and your new anode (4) PIPE SEALING TEFLON TAPE, with plenty left over for the next time you check your anode’s condition (5) INSTRUCTIONS. All you provide is a ½ Inch Ratchet or Breaker Bar, a friend and your favorite beverage! (not included).
- WATER HEATERS BURST AND YOU CAN PREVENT THIS! I began my plumbing apprenticeship in the 90s. The plumbers I worked for would say “they must place a self-destructing device in water heaters, timed to go off just after the warranty is over,” then shake their heads as we dragged a 7-year-old, rusty-sludge-spewing water heater away to the nearest recycling center. The plumbers weren’t entirely wrong, they just got it backwards. Next>
- WHAT I’VE LEARNED: Manufactures install an anode rod in every water heater at the factory because they know their tanks will quickly rust and fail without one. The anode rod takes the destruction from a chemical process called electrolysis so the tank doesn’t have to. If the water heater has a 6 year warranty, the Anode Rod is sized to last about 5 years in laboratory conditions. Longer warranties on water heaters come with a new decal for the outside of the tank and a slightly larger Anode Rod.
- CHANGING THE ANODE ROD IS EASY, REPLACING YOUR WATER HEATER IS NOT! Anodes are designed to be easily and regularly replaced. Their only purpose is to decay instead of your water heater, and that’s exactly what it will do. As soon as the anode rod is depleted and fully decayed, the water heater begins to rust, then crack, fail and leak. Inspecting and changing your anode rod every 2 years will keep your water heater’s tank, strong reliable and off your mind!
YOU CAN DO THIS!
WE’LL WALK YOU THROUGH EACH EASY STEP
1. EASY-TO-FOLLOW, STEP-BY-STEP INSTRUCTIONS.Do It Yourself Instructions, written by plumbers and translated for everyday problem solvers like you.
2. EVERYTHING YOU NEED IS INCLUDED FOR EASY INSTALLATION. This Complete Kit includes all-four necessary components: (1) 44 Inch long Magnesium Flexible Anode with a ¾ Inch diameter using the standard ¾ NPT hex plug connection (2) Heavy-duty, ½ Inch Drive, 1-1/16” Deep-Well Chrome Vanadium Socket Tool (3) Large roll of Teflon Tape and a Brass hose Cap. All you provide is a ½ Inch ratchet or breaker-bar.
3. YOU CAN REST ASSURED YOU HAVE THE RIGHT SOCKET. Use the included 1-1/16” Socket to remove the old anode rod and to quickly install your new anode.
4. NO LEAKS! We include a full-roll of Teflon Tape to ensure you will not have leaks and will also have, plenty left-over for next time.
5. NO DRIPS! We included a Brass cap you can thread onto your drain after your done, just to be sure your floor is always dry.
6. ONE SIZE FITS MOST. Most water heaters use this HEX TYPE (6-sided top that looks like a bolt) ¾”or 0.80” diameter anode. A few water heaters do use a “hot-water-outlet type” where the anode is part of the the outlet piping. (You may want to check first.)
7. SAVE YOUR TANK AND SAVE $. Magnesium is the best anode rod material used to protect your water heater. This Magnesium sacrificial anode rod will decay instead of your hot water tank. That’s it’s job!
8. INSTALL IN SMALL SPACES. The About Fluid flexible hinged design allows you to install the anode rod in any location, requiring only twelve inches of overhead clearance.
.
Conclusion
By our suggestions above, we hope that you can found american 40 gallon hot water anode rod for you.Please don’t forget to share your experience by comment in this post. Thank you!
