minmommy 
Nowadays, there are so many products of all metal hotend with slotted cooling block for wanhao i3 in the market and you are wondering to choose a best one. You have searched for all metal hotend with slotted cooling block for wanhao i3 in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings all metal hotend with slotted cooling block for wanhao i3 which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Micro Swiss All Metal Hotend with Slotted Cooling Block for Wanhao i3 w/.4mm Nozzle
- Fits: Wanhao i3, Monoprice Maker Select 3D Printer v2, Cocoon Create 3D Printer
- .4mm Nozzle Plated with HIGH LUBRICITY WEAR RESISTANT TwinClad XT Coating
- Kit Includes: Thermal Barrier Tube, Plated Nozzle and Slotted Cooling block
- Slotted Clamping system, No set screw to ding and damage thermal tube, Significantly better heat transfer
- Made in USA by Micro Swiss
This is Micro Swiss All Metal Hotend kit with redesigned cooling block for Wanhao i3 with the following improvements: Micro Swiss All Metal Hotend Kit Features: All metal hotend upgrade for MK10 style extruders. This upgrade includes a modified thermal barrier tube and modified nozzle with modified cooling block. Thermal barrier tube is made from 2 different materials. The lower thermal break is made from stainless steel, and the colder upper part is made from aluminum. Stainless steel was used for thermal break because it offers low thermal conductivity, and aluminum was used for the upper portion because it has a lot better thermal conductivity, to carry away any heat from the filament. All metal hotend will let you print at much higher temperature then possible with original PTFE lined one. Another benefit of an all metal hotend design is more consistent melt chamber control. During slow extrusion rate, in PTFE lined hotend, transition zone from solid to molten plastic tends to creep upward creating more stringy prints. With all metal design a transition zone is always constant, being located right at the heat break. With fast extrusion rate, PTFE tube doesn’t have enough thermal conductivity to properly melt all the plastic coming out. On MK10 extruders that limitation happens around 60 mm/s, depending on nozzle size. All metal hotend solves this problem, plastic is surrounded by thermally conductive nozzle throughout its length. STEP BY STEP INSTALLATION INSTRUCTION https://store.micro-swiss.com/pages/micro-swiss-all-metal-hotend
Micro Swiss All Metal Hotend with Slotted Cooling Block for Duplicator 6 / Monoprice Maker Ultimate 3D Printer .4mm
This is Micro Swiss All Metal Hotend kit for Wanhao Duplicator 6. This upgrade includes a modified thermal barrier tube and modified nozzle with modified cooling block. Thermal barrier tube is made from 2 different materials. The lower thermal break is made from stainless steel, and the colder upper part is made from aluminum. Stainless steel was used for thermal break because it offers low thermal conductivity, and aluminum was used for the upper portion because it has a lot better thermal conductivity, to carry away any heat from the filament. All metal hotend will let you print at much higher temperature then possible with original PTFE lined one. Another benefit of an all metal hotend design is more consistent melt chamber control. During slow extrusion rate, in PTFE lined hotend, transition zone from solid to molten plastic tends to creep upward creating more stringy prints. With all metal design a transition zone is always constant, being located right at the heat break. With fast extrusion rate, PTFE tube doesn’t have enough thermal conductivity to properly melt all the plastic coming out. On original extruders that limitation happens around 60 mm/s, depending on nozzle size. All metal hotend solves this problem, plastic is surrounded by thermally conductive nozzle throughout its length.
Water Cooling Block, 3 Sizes Aluminum Water Cooling Block Liquid Water Cooler Heat Sink System Flat Effluent for CPU Graphics Radiator Heatsink(#3)
- ❤ Premium Quality: This water cooling block is made of high quality pure aluminum material, which is sturdy and durable. It is not easily damaged, has reliable quality and long service life.
- ❤ Product Specification: Material: pure aluminum, processing: vacuum aluminum brazing, interface outer diameter: approx. 9.5mm / 3.7in, interface inner diameter: approx. 6mm / 2.4in.
- ❤ Easy Operation: This water cooling block is easy to install and convenient to use, which can provide you with a superior and practical using effect.
- ❤ Scope of Application: This water cooling block has high practicality, which is suitable for computer CPU water, industrial frequency inverter drive, industrial control cabinet cooling.
- ❤ Guarantee: All products sold by our brand, we will give the strict assurance of the quality. If you have any quality question about our product, please feel free to contact us.
Lilink– 3 Sizes Aluminum Water Cooling Block Liquid Water Cooler Heat Sink System for CPU Graphics Radiator Heatsink
Specification:
Condition: 100% Brand New
Item Type: Water Cooling Block
Material: Pure Aluminum
Processing: Vacuum Aluminum Brazing
Interface outer diameter: Approx. 9.5mm / 3.7in
Interface inner diameter: Approx. 6mm / 2.4in
Application: Suitable for computer CPU water, industrial inverter drive, laser head cooling, industrial control cabinet cooling
Optional Size:
#1: Approx. 80 * 80 * 15mm / 3.1 * 3.1 * 0.6in
#2: Approx. 80 * 160 * 15mm / 3.1 * 6.3 * 0.6in
#3: Approx. 80 * 250 * 15mm / 3.1 * 9.8 * 0.6in
Package List:
1 * Water Cooling Block
Note:
1. Please allow slight error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.
DIYhz Aluminum Water Cooling Block, Liquid Water Cooler Heat Sink System for PC Computer CPU Graphics Radiator Heatsink Endothermic Head Silver 2pcs(40mm x 40mm x 12mm)
- ★ Water cooling block size: 40 x 40 x 12mm
- Material: aluminum alloy.
- ★ The surface of the water cooling block is polished, the inner flow channel is extruded into an M-shaped flow channel, brazing parts into a whole.
- ★ The pagoda nozzle has a minimum outer diameter of 7mm and can be connected to an inner diameter of 7-8mm Water pipe.
- ★ This water cooling block applicable to computer CPU, graphics gpu heat, motherboard, xbox consoles cpu, graphics, semiconductor cooling piece, industrial inverter driver, laser head cooling and industrial control cabinet cooling.
- ★ Package Content: 2 x Aluminum Water Cooling Block.
Aluminum Water Cooling Block:
Specifications:
– Product Size: 40 x 40 x 12mm
– Processing: Vacuum Aluminum Brazing
– Polishing working surface and better heat absorption
Features:
❃ The internal flow channel is extruded into an M-shaped flow channel to maximize the hot and cold exchange area.
❃ The pagoda nozzle has a minimum outer diameter of 7mm and can be connected to an inner diameter of 7-8mm Water pipe.
❃ Applicable to computer CPU, graphics gpu heat, motherboard, xbox consoles cpu, graphics, semiconductor cooling piece, industrial inverter driver, laser head cooling and industrial control cabinet cooling.
Package Content:
2 X CPU Water Cooling Block
Fan-Ling 2pcs Right Angle Drill and Flexible Shaft Bits,Extension Screwdriver Bit Holder Connecting Link,Shaft Connecting Link,Suitable for Computer Case, Furniture,Plastic+Metal Material
- ♥ ♥ 【Welcome to “Fan-Ling”, please reading the product description and key product features carefully before buying .If you want to know more other products information, please search “Fan-Ling”】
- ♥ ♥ 【2-in-1 Angle Drills Bit Kit: It Come with a 105 Degree Right Angle Drill Extension Bit and a 30cm Flexible Extension Bit 】zither filter lay loggerhead bionic grip tiger armature rotor thin mini t-handle spoke chain cycle metric folding fold-up jumbo nuts offset pipe pedal watchdogs
- pin vice wire plus mixed all year straight combination end mill installer rotary file pocket-hole reduced triangle twist taper steal brick high speed wrench mask torque magic multipurpose adjustable wide bicycle bottle opener super single car cake costume spanner digital drive demolition female figure bike fancy dress grips holster pack jacket junior dogs jaw crescent lanyard lever necklace spinner outfit open plumbing plumbers park handled bend vest wheel essential keys
- deer tester us pro voltage integrated lithium-ion watch light bat one screwdrivers sonic doctor craftsman steel adapter screw extractor countersink buffer brush chisel collar depth stop dust collector extender tiles ceramic glass guide gauge grinder cutter index imperial iron jig knife sharpener wall masonry large metal measuring purpose tools cobalt nails nail nozzle cleaning nibbler oil pouch polishing pad polisher saw blue complete change router sanding disc tile make holes
- duty impact rated handle universal joint security pieces torsion quarter inch slotted sets titanium multi-bit professional line classic set, shaped shank work zone wing non slip ratcheting 6-in-1 under degree glasses hammer pliers controller plug empty rechargeable battery electrical spectacles only flat head repair gun gripper gift shock heads hook interchangeable insulated precision ring reach laptop multi air switch nut black organizer ox tray orange pen quality rack roll bag
All Metal Hotend kit with Slotted Cooling Block for Wanhao i3 /Wanhao i3 Plus and All Other i3 Clones
- Fits: Wanhao i3/Wanhao i3 Plus/Monoprice Maker Select 3D Printer v2/Monoprice Maker Select Plus/Cocoon Create 3D Printer
- Orifice size: .4mm
- Nozzle Plated with high lubricity/Precise control on bore diameter/Easier disassemble and adjustments
- Slotted Clamping system, No set screw to ding and damage thermal tube, Significantly better heat transfer
- Includes: Thermal barrier tube, Plated nozzle and Slotted cooling block
All Metal Hotend with Slotted Cooling Block for Wanhao i3,0.4mm
- Applicable models: Wanhao i3,Cocoon Create 3D Printer ,Monoprice Maker Select 3D Printer v2
- Product advantage:Slotted Clamping system,no set screw to ding and damage thermal tube, significantly better heat transfer,Easier disassemble and adjustments,precise control on bore diameter
- Orifice size available:0.4mm, nozzle plated with high lubricity wear resistant coating
- Kit Includes: Wear resistant nozzle,thermal tube,slotted cooling block
- Warranty: 30 days money back or exchange,if you met problem with your kit, we will solve the problem within 24 hours, JUST MESSAGE US BEFORE LEAVING A REVIEW. We can not guarantee 0% defective rate, but we guarantee 100% satisfaction
Color: silver
Packing size: 11*13*1CM
Kit weight: 36.8G
Orifice size available: 0.4mm
Applicable models:
Wanhao i3
Wanhao i3 Plus
Monoprice Maker Select 3D Printer v2
Monoprice Maker Select Plus
Cocoon Create 3D Printer
Kit Includes:
1*Wear resistant nozzle
1*Thermal tube
1*Slotted cooling block
All metal hotend kit features:
All metal hotend upgrade for MK10 style extruders. This upgrade includes a modified thermal barrier tube and modified nozzle with modified cooling block. Thermal barrier tube is made from 2 different materials. The lower thermal break is made from stainless steel, and the colder upper part is made from aluminum. Stainless steel was used for thermal break because it offers low thermal conductivity, and aluminum was used for the upper portion because it has a lot better thermal conductivity, to carry away any heat from the filament. All metal hotend will let you print at much higher temperature than possible with original PTFE lined one. Another benefit of an all metal hotend design is more consistent melt chamber control. During slow extrusion rate, in PTFE lined hotend, transition zone from solid to molten plastic tends to creep upward creating more stringy prints. With all metal design a transition zone is always constant, being located right at the heat break. With fast extrusion rate, PTFE tube doesn’t have enough thermal conductivity to properly melt all the plastic coming out. On MK10 extruders that limitation happens around 60 mm/s, depending on nozzle size. All metal hotend solves this problem, plastic is surrounded by thermally conductive nozzle throughout its length.
Micro Swiss All Metal Hotend Kit for Creality CR-10 / CR10 / CR10S / Ender 2 / Ender 3 Ender 5 Printers .4mm
- Fits: Creality CR-10 / CR-10S / CR-10-S5 / CR-10 MINI / CR-10-S4 / Ender 2 / Ender 3 / Ender 3 / TronXY X5S
- Orifice size: .4mm
- Kit Includes: Aluminum Cooling Block, Grade 5 Titanium Heat Break, Aluminum Heater Block, Brass Plated Wear Resistant MK8 .4mm Nozzle, Silicone Sock
- This is a Drop in All Metal Conversion Kit for CR-10 printers
- Made in USA by Micro Swiss
Micro Swiss All Metal Hotend Kit for Creality CR-10s PRO / CR-10 Max
- Fits: CR-10S Pro / CR-10 Max
- Orifice size: .4mm
- Kit Includes: Aluminum Cooling Block, Grade 5 Titanium Heat Break, Aluminum Heater Block, Brass Plated Wear Resistant MK8 .4mm Nozzle, Silicone Sock, Hardware kit
- This is a Drop in All Metal Conversion Kit for CR-10s PRO and CR-10 Max printers
- Made in USA by Micro Swiss
Conclusion
By our suggestions above, we hope that you can found all metal hotend with slotted cooling block for wanhao i3 for you.Please don’t forget to share your experience by comment in this post. Thank you!
