minmommy Nowadays, there are so many products of detector de humo honeywell in the market and you are wondering to choose a best one.You have searched for detector de humo honeywell in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings detector de humo honeywell which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
21,574 reviews analysed
Honeywell 5808W3 Wireless Photoelectric Smoke/Heat Detector
- Improved Robust RF Field Strength: The distance between the detector and receiver has been significantly increased without the need for a repeater
- Smart Check: A signal is sent to the control panel when the detector requires cleaning. This allows a regular nonemergency service call to clean the detector before it goes into alarm.
- Approved UL Listings for Residential and Commercial Applications: Both residential and commercial installation requirements are met
- Additional LED Status Indicators: Identifying between alarm or trouble conditions is a snap with green and red LED status indicators. A green LED denotes a normal condition while the red LED indicates abnormal conditions.
- Easy to install Mounting Base: The sturdy mounting base allows the detector to be more easily installed on uneven surfaces (i.e. stucco). The mounting base has larger mounting ports which accommodate drywall anchors for easy surface mounting.
First Alert CO400 Carbon Monoxide Detector, Battery Operated
- Keep your family safe with this easy to use, battery operated carbon monoxide alarm
- battery powered alarms provide continuous monitoring of CO levels, even if there’s a power failure
- Features an advanced electrochemical carbon monoxide sensor that accurately detects carbon monoxide levels, no matter where the detector is placed in the room
- A loud 85-decibel alarm sounds when CO levels reach dangerous levels
- To ensure complete protection make sure to place one on each level of your home and in each bedroom
- 5-year limited warranty
- equipped with end-of-life signal chirp, so you know when it’s time to replace the unit for safety
- All First Alert CO alarms are rigorously tested to meet UL standards
Product Description
The First Alert CO400 Carbon Monoxide Alarm utilizes an electrochemical carbon monoxide sensor to monitor your space for a carbon monoxide threat. The battery-powered design doesn’t require an electrician; simply insert the included 9-volt battery, and the carbon monoxide detector is ready to go. The advanced electrochemical CO sensor detects carbon monoxide leaks from multiple sources, such as faulty fuel-burning appliances, blocked chimneys, and generators running inside or too close to homes. When CO levels become elevated, a loud 85-decibel alarm alerts you to the threat. Because CO evenly distributes itself, it’s important to have a CO detector on every level and in every bedroom of your home. Designed to be simple to use, the CO detector has just one button that silences or tests the unit, as well as an end-of-life timer that lets you know when it’s time to replace the device.
Amazon.com
Carbon monoxide (CO) is the leading cause of accidental poisoning deaths in America, yet many people don’t know they are suffering from CO poisoning until its too late. Since symptoms of CO poisoning are like the flu, you might not even know you’re in danger at first. That’s why a carbon monoxide alarm is an excellent way to protect your family. It can detect the CO you can’t see, smell or taste in the air. The First Alert CO400 carbon monoxide alarm uses an electrochemical carbon monoxide sensor-the most accurate technology available. The permanent sensor lasts up to five years. It is powered by on 9V replaceable battery giving you peace of mind even during power outages. The test/silence button both silences the alarm and allows you to test its functionality. The unit monitors and re-alarms if carbon monoxide levels persist sounding a loud 85-decibel horn. No installation is required and the attractive design allows the unit to be placed anywhere you need it. It includes an optional wall mount with no outlet required. An audible and visual low battery signal alerts you to replace the battery. Pull down action chart has convenient guide on what to do if an alarm sounds. 5 year limited warranty. UL listed. –Bree Norlander
First Alert Smoke Detector Alarm | Hardwired with Backup Battery, BRK9120b6CP
- Keep your family safe with this hardwired smoke alarm the battery backup means constant monitoring, even if there’s a power failure
- Equipped with an ionization sensor, this smoke alarm reliably detects smoke from fast-flaming fires and alerts you with an 85-decibel alarm
- To ensure complete protection make sure to place one on each level of your home and in each bedroom
- Can connect to other compatible BRK or First Alert smoke detectors, to ensure all alarms will sound when smoke is detected
- Simple to use, with a single test/silence button, and side-load battery compartment tamper-resistant locking brackets and universal mounting brackets make installation easy
- Rigorously tested to meet UL standards120V AC power with 9V battery backup to keep alarm functioning during power outage
Product Description
This First Alert hardwired smoke alarm includes a 9-volt battery backup that continues to protect you in the event of a power failure. The detector features an ionization sensor for detection of smoke and fast-flaming fires, as well as a loud, 85-decibel alarm. One button silences any nuisance alarms, and also tests detector functions, while lights indicate if the alarm detects smoke. The latching alarm indicator automatically identifies which unit initiated the alarm, even after the conditions that set off the alarm have subsided. And an end-of-life signal enhances your safety by letting you know when it’s time to replace the unit. Connect it to compatible BRK or First Alert alarms within a single-family residence. When one alarm is triggered, all connected alarms will sound. There are generally two types of smoke alarms – ionization smoke alarms and photoelectric smoke alarms. Smoke particles of a varying number and size are produced in all fires. Ionization smoke alarms are generally more sensitive than photoelectric smoke alarms at sensing small particles, which tend to be produced in greater amounts by hot, flaming fires, that are consuming combustible materials rapidly and may spread quickly. Sources of these fires may include paper burning in a wastebasket, or a grease fire in the kitchen. Photoelectric smoke alarms are generally more sensitive than ionization smoke detectors at sensing large smoke particles, which tend to be produced in greater amounts by smoldering fires, which may smolder for hours before bursting into flame. Sources of these fires may include cigarettes burning in couches or bedding. For maximum protection, use both types of technology, such as in the Dual Sensor Smoke Alarm, on each level and in every bedroom of your home. Read moreabout choosing the right alarm, where to place home safety products and other fire safety information.
Amazon.com
Introducing the revolutionary BRK 9120 series smoke alarms which have been redesigned from the ground up. They install faster, perform better, and are even smarter than before. All of these improvements help reduce nuisance alarms and save you time and money. BRK Electronics smoke alarms are designed to be easy to install, easy to maintain, and quality-engineered for years of virtually maintenance-free service.
The 9120B AC-powered smoke alarm with battery backup includes these features:
- Ionization sensor which helps detect fast flaming fires that consume combustible materials rapidly.
- 120-volt AC inter-connectable (with maximum 18 compatible devices). The alarm can be interconnected with up to 12 other compatible smoke alarms and six compatible devices like bells, horns, repeaters and door closers. If one unit triggers an alarm, all smoke alarms in the series will sound. Power indicators show which unit in the series initiated the alarm.
- Latching alarm indicator which automatically identifies which unit initiated the alarm.
- Smart technology to reduce nuisance alarms.
- 9-volt battery backup for peace of mind during power malfunction.
- Single test/silence button which both silences a non-threatening alarm or low battery warning and allows you to test the unit’s functionality.
- Perfect mount system including a gasketless base for easy installation and new mounting bracket that keeps the alarm secure over a wide rotation range to allow for perfect alignment.
- Mounting bracket lock for tamper resistance.
- Dust cover to keep unit clean during construction.
- 10-year limited warranty.
All BRK Electronics smoke alarms meet UL 217 standard and are listed with the California State Fire Marshal. They use the new UL mandated repeating 85-decibel alarm horn pattern. 10-year limited warranty. This unit is approved for sale in Oregon after new revisions on law HB2586.–Bree Norlander
What’s in the Box
One smoke alarm, one 9-volt battery, and user’s manual
Kidde Carbon Monoxide Alarm
- Peak Level Button – Displays the peak CO level recorded by the alarm since it was last reset or unplugged
- Test Button Functions – Tests the unit for proper operation and resets the Carbon Monoxide alarm
- LED Operation – Blinking dot in lower right corner of display denotes normal operation
- Ten years after the initial power up, this alarm will “beep” two times every 30 seconds to indicate that it is time to replace the alarm.
- NOTE: This CO alarm is not battery operated. However, these alarms are equipped with 9 volt battery backup – the 9 volt battery is to supply short term back-up during a power outage.
Product Description
Digital Display – Displays the level of carbon monoxide the unit is sensing. The unit updates this reading every 15 seconds
Amazon.com
Protect your family from the dangers of carbon monoxide (CO) exposure with the Kidde KN-COPP-3 Nighthawk Plug-In Carbon Monoxide Alarm with Battery Backup and Digital Display. The Nighthawk is an easy-to-install unit that provides reliable protection against the dangers of CO. It features a digital display that shows CO levels in parts per million allowing you to see if, how, and when levels change.
|
 This discreet alarm is designed to fit into any standard A/C outlet in your house. View larger. |
 The easy-read digital display updates every 15 seconds to indicate any abrupt changes or alarming trends in CO levels. View larger. |
Advanced Technology in an Easy-to-Install, Plug-In Design
Designed for home use, the Kidde KN-COPP-3 Nighthawk is a UL-listed, A/C-powered, plug-in CO alarm that utilizes sophisticated electronic components and sensor technology to protect you and your family from the dangers of CO. It plugs directly into a standard A/C outlet and includes a 9-volt battery backup that provides continuous monitoring of CO levels–even during power outages.
About Carbon Monoxide: The Silent Killer
The leading cause of accidental poisoning deaths in North America, carbon monoxide (CO) is often referred to as the silent killer because it’s odorless, tasteless, and invisible. Carbon monoxide poisoning can come about via a number of sources, including everyday items and appliances in your home or office. And because symptoms of CO poisoning mimic the flu or other common illnesses it can often go undiagnosed.
Audible Alarm Pattern Alerts you to Elevated CO Levels
When placed on every level of your home, alarms like the KN-COPP-3 Nighthawk can help protect everyone in the house from CO exposure by giving you an unmistakable signal when levels have reached an unhealthy point. If unhealthy levels are detected, the alarm will emit four quick audible beats every five seconds until either levels decrease or the reset button is pressed.
Easy-to-Read Digital Display Shows CO Levels
The KN-COPP-3 Nighthawk is unique among traditional CO alarms because of its digital display. This display clearly shows levels of CO that the unit has detected and stored– from 30 to 999 ppm–and it updates every 15 seconds to indicate any abrupt changes or alarming trends. The display also shows the peak CO level recorded by the alarm since it was last reset or unplugged.
LED Shows Sensor Status
With the KN-COPP-3 Nighthawk, you never have to wonder if the sensor is functioning properly. A blinking dot in the lower right-hand corner of the display denotes normal operation, so you can trust that it’s working. In addition, you can test alarm function by pressing the test/reset button at any time to verify that the horn and electric circuitry are operating properly.
Convenient Mounting Options
The KN-COPP-3 Nighthawk has a low-profile design that makes it suitable for any room in your home. The detector can be plugged into any standard A/C outlet; it’s plug can be snapped into the back of the unit and can be rotated so the alarm remains vertical, independent of whether the electrical socket is mounted vertically or horizontally. In addition, the alarm comes with a 6-foot extension cord, so the unit can be plugged into the wall outlet and then placed on a table or shelf. For the most thorough protection, place an alarm on every level of your home.
The UL-listed Kidde KN-COPP-3 Nighthawk has a seven-year life and is backed by a five-year limited warranty.
About Kidde: A UTC Fire and Security Brand
Renowned for global leadership in fire detection and suppression, Kidde provides solutions ranging from portable fire extinguishers to advanced industrial controls such as flame detection and explosion suppression systems. Kidde is a UTC Fire and Security brand, with a history that’s rich with innovations, from the patent of the Chubb Detector Lock in 1818 to the development of the world’s first wireless networked smoke detectors in 2004.
What’s in the Box
Kidde KN-COPP-3 Nighthawk CO Alarm, 9-volt battery, mounting hardware, and installation guide.
 Keep your family safe by placing alarms and extinguishers in each area of the house, and by having a fire escape plan. Click here for a detailed image. |
First Alert Smoke Detector and Carbon Monoxide Detector Alarm | Z-Wave
- Help keep your family safe with this battery-operated smoke and carbon monoxide combination alarm. This easy-to-install smoke and carbon monoxide combination alarm connects with other Z-Wave compatible alarms and a Z-Wave hub (sold separately)
- Integrated wireless alarm system is Iris compatible to send you mobile alerts and emails, so you’re aware of dangers after the alarm is activated, whether you’re home or away
- Alarm features photoelectric smoke-sensing technology optimized to detect larger smoke particles produced by smoldering fires, and an electrochemical carbon monoxide sensor
- Certified for use with Nexia Home Intelligence, Ring Home Security System, and other third party Z-Wave systems
- not compatible with WINK or Onelink
- Includes test/silence button, side-access battery door, plus a tamper-resistant battery drawer and pins that lock the alarm to the mounting bracket
- Certified for use with Nexia Home Intelligence or other Z-Wave systems
- Combination Smoke and Carbon Monoxide protection that alerts you whether you are home or away
- Photoelectric smoke sensor helps reduce false alarms such as from cooking or shower steam
This easy-to-install First Alert Z-Wave ZCOMBO-G Smoke and Carbon Monoxide Alarm is designed for compatibility with certified First Alert enabled Z-Wave Devices. It can send you mobile alerts in the event of an emergency and includes an insect-screened photoelectric smoke sensing chamber, an electrochemical carbon monoxide sensor, an 85-decibel horn, a tamper-resistant battery door, and a single test/silence button. This alarm is specifically designed for residential and institutional applications such as sleeping areas in hospitals, hotels, dorms, and multifamily dwellings defined in standard NFPA 101. Fully tested, it complies with UL217, UL2034, CSFM, NFPA 720, NFPA 101, and other standards modeled on those agencies. This combination alarm also meets building codes requiring a battery-operated Z-Wave wireless smoke and carbon monoxide detector, as well as ICC codes.
Kidde Hardwire Combination Smoke/Carbon Monoxide Detector Alarm with Battery Backup and Voice Warning, Interconnectable | Model KN-COSM-IBA
- Smart Interconnect-Interconnects up to 24 Kidde devices (of which 18 can be initiating), Battery Backup (2-AA batteries included)-Provides protection during power outages.Front Loading Battery Door-Replace the backup batteries without disconnecting from mounting bracket
- Humidity range:10%-95% relative humidity, non-condensing.Battery Lockout System-The battery door will not close unless the batteries are properly installed, Alarm Tamper Resist-Helps deter from tampering and theft, Adjustable Mounting Bracket-Makes installation fast and easy. Works with existing smoke and combination smoke and CO mounting brackets.
- Peak Level Memory-Announces “CARBON MONOXIDE PREVIOUSLY DETECTED” if alarm has detected a CO level of 100ppm or higher since it was last reset, HushTM Feature-Silences nuisance alarms for approximately 9 minutes. (Smoke must be present before HushTM is activated)
- Ionization Sensor Technology-Ideal for detecting fast flaming and other types of fires, est Button Functions:– Tests the unit for proper operation – Peak Level memory – Resets the Carbon Monoxide alarm
- Green LED-Illuminates to indicate the unit is receiving AC power. Flashes once every 60 seconds to indicate battery only mode. Flashes once per second during alarm to indicate initiating alarm. Flashes once every 16 seconds to indicate smoke or CO previously detected. Flashes every 2 seconds while the alarm is in HUSHTM mode
- Red LED-When a dangerous level of smoke or carbon monoxide is detected the red LED will flash. If the unit malfunctions, the red LED will flash and the unit will chirp every 30 seconds
- Talking alarm announces the hazard type detected, helping to speed up reaction time
- Combined carbon monoxide and smoke alarm, a single unit can be installed where previously two were needed
- Battery safeguard ensures the unit cannot be accidentally mounted without batteries
- Test-reset button tests alarm circuitry and triggers the voice announcement
- Meets safety standards set by Underwriters Laboratories (UL) and interconnects with other KN-COSM-IBA models
- 120V AC, All Kidde brand hard wired smoke alarms are interconnectable with the KN-COSM-IBA
Product description
This combination smoke/CO alarm features an 85dB horn and voice that announces “Fire”, “Carbon Monoxide”, and “Low Battery” warnings when detected. It can also interface with other Kidde interconnectable alarms. Meets NFPA 72 standards Smoke and Carbon Monoxide Alarm
Amazon.com
The KN-COSM-IBA combines a Carbon Monoxide and Ionization Smoke Alarm, providing two important safety devices in a single unit. This alarm includes a voice warning system that helps eliminate confusion, as it tells you if its detected fire or carbon monoxide, or even if it needs a new battery. This alarm has 2 AA battery backup, which protects you and your family — even during a power outage when many incidences occur. The alarm also allows you to easily silence nuisance alarms using its convenient Smart Hush feature.
This talking combo alarm is powered by your home’s electricity and can interconnect with other smoke alarms in your home. Experts recommend interconnected alarms, because when one sounds, they all sound, providing an early warning against fire by dramatically increasing your ability to hear an alarm anywhere in your home, regardless of where the fire starts.
Combination Smoke/CO Alarm for Improved Safety
The Kidde Combination Carbon Monoxide & Smoke Alarm includes a voice warning system that eliminates confusion and clearly warns you and your family of a smoke or carbon monoxide danger, or if your battery is in need of replacement or your alarm is in hush mode.
Alarm Warnings
Fire: The red LED will flash and be accompanied by three long alarm beeps followed by a verbal warning message “Fire! Fire!” The alarm will repeat pattern until smoke is eliminated.
Carbon Monoxide: Four short alarm beeps followed by a verbal warning “Warning! Carbon Monoxide!” This continues until the unit is reset or CO is eliminated.
Low Battery: One chirp followed by warning “Low Battery” The red LED light will flash. This pattern will continue every minute for the first hour. After the first hour the red LED light will flash once every minute accompanied by the chirp sound. The low battery warning will only sound once every fifteen minutes.
Voice Hush Indication: “Hush Activated” and “Hush Cancelled” voice announcement.
Peak Level Memory: If the alarm had detected a CO level of 100ppm or higher when the Test/Reset button is pressed, the unit will announce “Carbon Monoxide Previously Detected” to warn of the CO incident.
Inter-connectable for Improved Safety
Fire and consumer experts recommend interconnected alarms for added protection. According to the National Fire Protection Association (NFPA), most Americans feel they are more at risk of being a victim of a tornado than of a house fire. Actually the opposite is true. Fires are more common than any other disaster that strikes a family at home, and can become deadly in minutes.
You have on average less than three minutes from the time you hear a smoke alarm to escape a fire. The sooner you hear an alarm, the sooner you can get out safely. Smoke alarms that link together so that when one goes off, they all go off, are called interconnected alarms. These alarms provide more warnings in more places, giving your family more time to escape a house fire. Houses built after 1993 are required by building codes to have interconnected alarms that are wired into their electrical system.
KN-COSM-IBA Hardwire Combination Carbon Monoxide and Smoke Alarm
At a Glance
- Talking alarm announces the hazard type detected, helping to speed up reaction time
- Employs both smoke and carbon monoxide sensors
- Inter-connectable to provide improved protection
- Features a hush button to silence the alarm for non-emergency situations like a smoky dinner
- Battery safeguard ensures the unit cannot be accidentally mounted without batteries
Trademarked Hush Feature for Convenience
By pressing the Hush button, you can easily and safely silence nuisance alarms caused by non-emergency situations, such as overcooked dinners.
This feature desensitizes the alarm for approximately ten minutes. If the smoke is not too dense, the alarm will silence immediately, the unit will verbally announce “Hush Mode Activated,” and the green LED will flash every 2 seconds for approximately 10 minutes.
Reliable AA Battery Backup, Indicator LED, Test Feature, Low Battery and End-of-Life Warning
The alarm’s AA battery backup provides continuous protection, even during power outages. Because this alarm only helps protect you if it’s working, this unit features a red LED that flashes every 30 to 40 seconds to indicate that it is operating correctly. For additional peace of mind, the alarm also contains a test/reset button that enables you to periodically test its circuitry and horn.
If any form of battery failure is detected the red LED light will flash and the unit will “chirp” one time, followed by the warning message “Low Battery.” This cycle will occur once every minute, and will continue for at least seven days.
Ten years after initial power up, this unit will “chirp”every 30 seconds. This is an “operational end of life” feature which will indicate that it is time to replace the alarm. UL 2034, the independent standard applicable to CO alarms, requires CO alarms to have an end of life warning. This requirement went into effect in March 2007, meaning any CO alarm manufactured after April 2007 with a UL listing must have this feature. Most states that require CO alarms in residential dwellings mandate that the alarm meet the UL 2034 standard.
The unit measures just 5.75 inches in diameter and 1.7 inches deep, and it features a neutral, white finish. It includes tamper resist features to deter vandalism or theft. This combination smoke/CO alarm is UL listed, so you can be confident of its quality, and it is backed by a 10-year limited warranty.
About Kidde: A UTC Fire & Security Brand
Renowned for global leadership in fire detection and suppression, Kidde provides solutions ranging from portable fire extinguishers to advanced industrial controls such as flame detection and explosion suppression systems. Kidde is a UTC Fire & Security brand, with a history that’s rich with innovations, from the patent of the Chubb Detector Lock in 1818 to the development of the world’s first wireless networked smoke detectors in 2004.
What’s in the Box
Combination smoke and carbon monoxide alarm with mounting bracket and mounting hardware, quick-connect wiring harness, two AA batteries, a 10-year limited warranty and a bilingual (English/Spanish) user’s manual.
First Alert Smoke Detector and Carbon Monoxide Detector Alarm | Hardwired with Battery Backup, BRK SC9120B
- Keep your family safe with this hardwired smoke and carbon monoxide alarm
- the battery backup means constant monitoring, even if there’s a power failure
- Features an electrochemical Carbon Monoxide sensing technology as well as an ionization sensor that detects the fine particles of a fast-burning fire
- Indicator lights on the face of the unit display the presence of smoke or carbon monoxide, while an 85-decibel siren provides a clear, loud warning upon detection
- Can connect to other compatible BRK or First Alert detectors, to ensure all alarms will sound when threat is detected
- Simple to use, with a single test/silence button, and side-load battery compartment
- tamper-resistant locking brackets and universal mounting brackets make installation easy
- Rigorously tested to meet UL standards
Kidde 21026043 Battery-Operated(Not Hardwired) Combination Smoke/Carbon Monoxide Alarm with Voice Warning KN-COSM-BA
- Voice Alarm –Announces the hazard type detected thereby helping to speed up the correct reaction to the hazard detected. Alarm announces “Fire!” when a smoke or fire hazard is detected and announces “Warning Carbon Monoxide” when a CO hazard is detected
- Combined Carbon Monoxide and Smoke Alarm – A single unit can be installed where previously, two were needed. Reduces installation time and helps to keep home décor attractive.
- Audio alarm: 85 dB at 10 feet. Test/Reset Button and LEDs – Tests alarm circuitry and triggers the voice announcement. Flashing green for normal operation and flashing red for alarm condition. Humidity Range: 10 percent to 95 percent relative humidity non-condensing
- Battery – Provides protection even during power outages when many fire and carbon monoxide incidents occur. The unit warns of a low battery condition by announcing “low battery” and by initiating an alarm chirp and activating a flashing red LED. The battery door will not close unless the batteries are properly installed. Note : The date printed on the item is manufacturing date,not the expiration date. Refer to the PDF attached below in Technical Specification for Manual.
- Voice Announcements – Hush Feature temporarily silences nuisance alarms with “HUSH MODE ACTIVATED” and “HUSH MODE CANCELLED” voice announcement. If the alarm had detected a CO level of 100ppm or higher, the unit will announce “CARBON MONOXIDE PREVIOUSLY DETECTED” to warn of the CO incident, when the Test/ Reset button is pressed.Temperature Range:40˚F (4.4˚C) to 100˚F (37.8˚C).Voltage (volts):4.5
The Kidde KN-COSM-BA Combination Carbon Monoxide & Smoke Alarm provides two important safety devices in a single unit. This alarm includes a voice warning system that announces “Fire, Carbon Monoxide, Low Battery and Smart Hush Activation.” The voice alarm eliminates any confusion and clearly warns you and your family of a smoke or carbon monoxide danger, or if your battery is in need of replacement. This technologically advanced combination alarm is battery operated protecting you and your family even during a power outage when many incidences occur. The KN-COSM-BA is an easy to install alarm that is suitable for all living areas and has a 10-year life and a 5-year limited warranty. This alarm uses ionization sensing technology. Leading authorities recommend that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fires that can occur within the home. Ionization sensing alarms may detect invisible fire particles (associated with fast flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible fire particles (associated with slow smoldering fires) sooner than ionization alarms.
Kidde 21026044 Wireless Interconnect Battery Operated Smoke Detector Alarm | |, Model RF-SM-DC
- Wireless technology uses radio frequency to transmit and receive messages
- Battery power enables homeowners to install interconnected alarms without rewiring
- Smart touch button quickly and temporarily silences nuisance alarms
- Wireless alarm can be installed in a detached workshop or shed
- Kidde wireless smoke alarms meet UL requirements. Interconnects Up to 24 devices ( of which 18 can be initiating). With 18 initiating devices (smoke, heat, CO, etc.) interconnected, it is still possible to interconnect 6 strobe lights and or relay modules
Product Description
Kidde RF-SM-DC Wireless Interconnect Battery-Operated Smoke Alarm
Amazon.com
What’s in the Box One 0919-9999 smoke alarm with mounting bracket and mounting hardware, 3- AA batteries, a 10-year limited warranty and a bilingual user’s manual. The Kidde 0919-9999 Battery-Operated Wireless Smoke Alarm allows for the easy installation of an interconnected smoke alarm system without the high cost and hassle of rewiring your home. The alarms are wirelessly linked so that when one alarm is triggered, all alarms will sound. This alarm can also be placed in a detached workshop or shed and linked into the home’s interconnected system. Experts recommend interconnected alarms, because when one sounds, they all sound, providing an early warning against fire by dramatically increasing your ability to hear an alarm anywhere in your home, regardless of where the fire starts. Newer homes are required by code to have interconnected alarms. Wireless technology now enables any home to have an interconnected system. This alarm uses ionization sensing technology. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fire that can occur within the home. Choose the Right Wireless Alarms for Your Home Kidde offers two wireless product options: a Battery Powered Smoke Alarm, and an AC Powered Smoke Alarm. These products enable you to customize your system based on your specific needs. Read below to see which Kidde wireless smoke alarms are best for your home. Why Wireless? When one alarm sounds they all do Ability to interconnect without wires Install in minutes, anywhere in the home Less cost, and less hassle than re-wiring An interconnected system provides more warnings in more places in case of smoke or fire in your home. The Kidde Wireless System alarms have a hush button to silence nuisance alarms. View larger. Getting Started with Wireless Interconnect in Three Easy Steps Step 1 – Determine the type of smoke alarms currently installed in your house. 1. Battery Powered No wires; runs only on batteries. Most older homes have battery-powered smoke alarms. These alarms have no protruding wires and are battery powered. 2. Hardwired Runs on your home’s electricity and may have battery backup. Only one alarm sounds when test button is pressed. If your home was built in the last 20 years, you probably have hardwired smoke alarms. If only the alarm that you test sounds, then you do not have an interconnected system. 3. Interconnected Runs on your home’s electricity and may have battery backup. All alarms sound when one test button is pressed. Homes built in the last 15 years may have an interconnected smoke alarm system. If all alarms sound when you test, you have an interconnected system. Step 2 – Decide how many alarms you need in your home. The NFPA recommends at least one smoke alarm on every level of the home and in every sleeping area. Step 3 – Based on your home’s current alarm set-up, decide which Kidde Wireless alarms to purchase. 1. If your home has only battery powered alarms: Purchase enough Kidde Wireless Battery Powered Smoke Alarms (0919-9999) to replace all of your current smoke alarms. You will also have the ability to add Kidde Wireless Battery Powered Alarms in additional rooms for expanded coverage. 2. If your home has only hardwired smoke alarms: Purchase enough Kidde Wireless AC Powered Smoke Alarms (1279-9999) to replace all of your current smoke alarms. You will also have the ability to add Kidde Wireless Battery Powered Alarms in additional rooms for expanded coverage. 3. If your home has interconnected smoke alarms: Purchase one Kidde Wireless AC Powered Smoke Alarms to replace one current smoke alarm. Kidde Wireless Battery Powered Alarms can then be installed in additional rooms. Interconnectable for Improved Safety Fire and consumer experts recommend interconnected alarms for added protection. According to the National Fire Protection Association (NFPA), most Americans feel they are more at risk of being a victim of a tornado than of a house fire. Actually the opposite is true. Fires are more common than any other disaster that strikes a family at home, and can become deadly in minutes. You have on average less than three minutes from the time you hear a smoke alarm to escape a fire. The sooner you hear an alarm, the sooner you can get out safely. Smoke alarms that link together so that when one goes off, they all go off, are called interconnected alarms. These alarms provide more warnings in more places, giving your family more time to escape a house fire. Houses built after 1993 are required by building codes to have interconnected alarms that are wired into their electrical system. Trademarked Hush Feature for Convenience By pressing the Hush button, you can easily and safely silence nuisance alarms caused by non-emergency situations, such as overcooked dinners. This alarm’s Smart Hush feature has the capability of temporarily desensitizing the alarm circuit for up to 8 minutes. This feature is to be used only when a known alarm condition, such as smoke from cooking, activates the alarm. The smoke alarm is desensitized by pushing the Test/Hush button on the smoke alarm cover. If the smoke is not too dense, the alarm will silence immediately. The red LED will illuminate for 1.5 seconds every 8 seconds while in hush. This indicates that the alarm is in a temporarily desensitized condition. The smoke alarm will automatically reset after approximately 8 minutes and sound the alarm if particles of combustion are still present. Smart Hush can be used repeatedly until the air has been cleared of the condition causing the alarm. Pushing the Test/Hush button on the alarm will end the hush period. 3-AA Batteries, Indicator LED, and Test Feature Because a smoke alarm only helps protect you if it’s working, this unit features a red LED that flashes every 10 seconds to indicate that it is operating correctly. For additional peace of mind, the alarm also contains a test/reset button that enables you to periodically test its circuitry and horn. The alarm’s 3-AA batteries provide continuous protection against smoke and fire hazards, even during power outages. The unit offers a low battery warning that issues a brief chirp every 30 to 40 seconds for at least seven days before losing power, letting you know that it’s time to change the battery. This alarm is UL listed, so you can be confident of its quality, and it is backed by a 10-year limited warranty that lasts the life of the alarm. About Kidde: A UTC Fire & Security Brand Renowned for global leadership in fire detection and suppression, Kidde provides solutions ranging from portable fire extinguishers to advanced industrial controls such as flame detection and explosion suppression systems. Kidde is a UTC Fire & Security brand, with a history that’s rich with innovations, from the patent of the Chubb Detector Lock in 1818 to the development of the world’s first wireless networked smoke detectors in 2004. What’s in the Box One 0919-9999 smoke alarm with mounting bracket and mounting hardware, 3- AA batteries, a 10-year limited warranty and a bilingual user’s manual.
First Alert Dual-Sensor Smoke and Fire Alarm, Battery Powered, Frustration-Free Packaging, SA320CN
- Help keep your family safe with this battery-operated smoke alarm
- it requires no rewiring for installation and provides continuous monitoring even if there’s a power failure
- Equipped with both a photoelectric and ionization sensor to quickly detect both fast burning, and smoldering fires
- Single test/silence button lets you easily check alarm function and mute false alarms
- use Polaroid AA batteries for best results
- Loud 85-decibel siren sounds to alert you to danger
- To ensure complete protection make sure to place one on each level of your home and in each bedroom
- It can ship within the US except New York
The First Alert SA320CN Dual-Sensor Smoke and Fire Alarm is an advanced smoke detector that uses ionization and photoelectric sensors to provide early warning of both smoldering and flaming fires. Intelligent sensing technology helps to reduce false alarms from household triggers such as cooking smoke or shower steam. The battery-powered fire alarm installs quickly and easily with no wiring required. A loud 85-decibel siren is designed to alert even the soundest of sleepers, and a single button silences and tests the unit. Plus, it ships in frustration-free packaging so you can install it immediately.
Conclusion
By our suggestions above, we hope that you can found Detector De Humo Honeywell for you.Please don’t forget to share your experience by comment in this post. Thank you!
Our Promise to Readers
We keep receiving tons of questions of readers who are going to buy Detector De Humo Honeywell, eg:
- What are Top 10 Detector De Humo Honeywell for 2020, for 2019, for 2018 or even 2017 (old models)?
- What is Top 10 Detector De Humo Honeywell to buy?
- What are Top Rated Detector De Humo Honeywell to buy on the market?
- or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Detector De Humo Honeywell?…
- All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Detector De Humo Honeywell.
- Before deciding to buy any Detector De Humo Honeywell, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
- You will know how you should choose Detector De Humo Honeywell and What you should consider when buying the Detector De Humo Honeywell and Where to Buy or Purchase the Detector De Humo Honeywell. Just consider our rankings above as a suggestion. The final choice is yours.
- That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
- You could see the top 10 Detector De Humo Honeywell of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
- You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Detector De Humo Honeywell.
