minmommy 
Nowadays, there are so many products of hot water circulation pump 12v in the market and you are wondering to choose a best one. You have searched for hot water circulation pump 12v in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings hot water circulation pump 12v which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
45,190 Reviews Scanned
bayite BYT-7A006 DC 12V Solar Hot Water Heater Circulation Pump Low Noise 3M Discharge Head 2.1GPM
- Circulation pump is non-self-priming pump (0 Suction Height). Max Flow Rate: 2.1GPM, Max Discharge Head: 9.8ft. Max system pressure: 10Bar(145PSI) . This doesn’t mean the pump produces 145PSI. It means the pump can be connected to the system less than 145PSI pressure
- 1/2″ Male thread on the pump. The OD of the brass coupler is 10mm. NO POWER ADAPTER INCLUDED
- Power source: DC 12V(NOT INCLUDED), Rated current: 0.7A, Brushless Motor, Low noise: 30db at 1 metre, Service life: 30000 hours. Please note: If you use this pump for circulating wort it should be cleaned out after using it
- Max circulating water temperature: 100°C/212°F. It’s submersible but can’t be immersed in hot water exceeding 50°C/122℉
- One year warranty: replacement without return
bayite BYT-7A014 DC 12V Solar Hot Water Heater Circulation Pump Low Noise 3M Discharge Head 2.1GPM
- Circulation pump is non-self-priming pump. Max Flow Rate: 2.1GPM, Max Discharge Head: 9.8ft
- 1/2″ Male thread on the pump. The OD of the brass coupler is 10mm. Plug type: 2.1mm x 5.5mm female. NO POWER ADAPTER INCLUDED
- Power source: DC 12V(NOT INCLUDED), Rated current: 0.7A, Brushless Motor, Low noise: 30db at 1 metre, Service life: 30000 hours
- Max circulating water temperature: 100°C/212°F. It’s submersible but can’t be immersed in hot water exceeding 50°C/122℉
- One year warranty: replacement without return
It’s perfect for the home solar water heating systems or other circulation pump application.
Brushless Motor,Super long working life,low consumption and low noise
Power source: DC 12V
Rated current: 0.7A
Low noise: 30db at 1 metre
Service life: 30000 hours up
Inlet/Outlet: 1/2″ male thead. Fit both 1/2″ NPT and BSP female thead. We’ve tested. w/ two brass coupler
Max Flow Rate: 8L/Min(2.1GPM)
Max Water Head: 3 metre(9.8ft)
Max system pressure: 10Bar(145PSI)
Max circulating water temperature: 100°C/212°F. Can’t be immersed in hot water exceeding 50°C/122℉
Package included:
1x bayite DC 12V Circulation Water Pump(NO POWER ADAPTER INCLUDED)
Watts 500800 Instant Hot Water Recirculating System with Built-In Timer, Easy to Install
- WATTS HOT WATER RECIRCULATING PUMP: Provides hot water at every faucet or shower when needed, eliminating wasted water , 0.5 inches bypass value
- BEST SELLER RECIRCULATING SYSTEM: Conserve Water – Up to 15,000 gallons of water per year. Save Money – Up to 10% of your water bill and its cost only 5 a day to operate
- EAST TO INSTALL: This unique product connects easily to existing plumbing. Easy to install in less than 1 hour. And it is maintenance free
- WATTS HOT WATER RECIRCULATING SYSTEM: The Kit Includes: Pump with timer, 2 adapters with rubber washers, valve mounting screws, sensor valve, two 12-inch supply lines
- RECIRCULATING PUMP WITH TIMER: 24-hour programmable timer activates pump when you need it. And it is extremely quiet compared to other system in the market – no vibrations. Do not use with tankless water heaters. Insert the 115V plug on the line cord from the pump into a properly grounded 115V outlet
Product Description
Specification:
- Voltage: 120 volts
- Item Weight: 8.5 pounds
- Overall Dimension: 6.2 x 6 x 5 inches
- Size: Full
- Color: Blue
- Material: Case
- Warranty: 1 Year
Never wait for hot water again! The Watts Hot Water Recirculating Pump provides hot water at every faucet or shower when needed, eliminating wasted water. It is easy to install on any water system and requires no additional piping. The unique design of the pump ensures quiet, maintenance-free operation. The system includes a built-in 24 hour, a dual setting programmable timer to activate the pump only when needed. System that provides instant hot water to every faucet or shower in a home when you need it. Stop throwing money down the drain and waiting for your hot water.
From the Manufacturer
The Watts Premier hot water recirculation pump puts hot water at every tap when you want it. Saves up to 15,000 gallons per year. The pump brings convenience and savings to your home, giving you hot water instantly at every faucet, when you need it. This unique product is easy to install and not only provides you with the convenience of hot water when you need it, but saves an average of over 11,000 gallons per year. *May not work with a tankless water heater.
ZAOJIAO DC 12V Brushless Water Pump 1/2” Male Thread Centrifugal Submersible Pump 800L/H 210GPH 5M/16ft for Fountain Solar Panel Pond Aquarium Water Circulation System
- ★Circulation pump is non-self-priming pump. Fit for fountain, pool, pet aquarium, fish tank, solar circulation system, water circulation system, hydroponic systems, et.
- ★The outlet of the pump is 1/2”male thread, easily connect with a hose, detachable and Cleanable. No need any tools to detach it, easy to separate, easy to clean.
- ★Max flow rate: 800L/H(210GPH)
- Max lift height: 5m (16ft)
- Working temperature: 0℃ – 60℃/(32°F – 140°F)
- ★Submersible installation and entirely waterproof, the point straight in line with the pump body is the water inlet, vertical to the pump body is water outlet.
- ★Super long working life (more than 30,000 hours). Small size, high efficiency, low consumption, low noise (less than 35db).
Specifications:
Material: ABS
Power consumption:19w
Working voltage: 12VDC
Rated current: 1.5V
Max flow rate: 800L/H(210GPH)
Max lift height: 5m (16ft)
Diameter of inlet: 0.5 inch
Diameter of outlet: 0.5 inch
Noise: <>
Waterproof level: IP68
Lifespan: More than 30,000hrs
Working temperature: 0℃ – 60℃/(32°F – 140°F)
Item dimension: 77*66*49mm
Weight: 220g(7.8ounces)
Power Cord:46cm(18″)
Note:
1. Working at rated voltage (DC12V/1.5A ). The positive pole is red wire, the negative pole is black wire. Excessive voltage and current will affect the life of the pump.
2. This pump is centrifugal pump, it can’t vent the air automatically, so it must be operated by submersible installation.
3. Preventing any hard particles entering the pumps.
4. When blocking, long-running is not allowed.
How to choose pump:
Working environment (temperature and medium)
Make sure the dimension (threaded interface or not, the direction and diameter of outlet and inlet)
Make sure the working voltage, current, head and flow. The Max head means the static head. The pump can lift to the max height when there is no flow. If you want special flow at special height, you must choose more higher head than the height you want to pump.
Package includes:
1 * Water pump
Similar items with 4 stars and above
TOPINCN Solar High Temperature Water Pump DC 12V 10W Brushless Water Heater Hot Circulation Pump Submersible Low Noise 1/2 Thread
- ★ APPLICATION: Can be used for industry, agriculture, family water circulation and pressurization
- ★ LEAK PROOF: Pump spindle change form motive seal to closed static sealing, so that the leakage of the medium is completely avoided
- ★ WATERPROOF: Can use on the land or in the water, completely waterproof
- ★ SOLAR PUMP: The pump is perfect for the family home thermal solar systems or any circulation pump application where conventional power is not available
- ★ WATER PUMP: This pump is intended for use with water only
Descriptions:
This water pump can be used for industry, agriculture, family water circulation and pressurization. Pump spindle change form motive seal to closed static sealing, so that the leakage of the medium is completely avoided.
Specifications:
Rated voltage: DC 12V
Power: 10W
Rated current: 0.8A (maximum)
Inlet/outlet size: 1/2″
Thread: 20 mm
Flow: 8L/min (max)
Water temperature: Max. 55℃
Wire length: 80cm
Low noise: < 35db
Life span: > 40000hrs
Delivery medium: clean water
Size: 10 * 9cm / 3.94 x 3.54inch
Weight: 257g
Package Included:
1 x Solar High Temperature Water Pump
Flow Max 689052 Self-Priming 12V Water Pump | 3.0 GPM | 50 PSI | 9.5 Max Amps
Lippert Components Flow Max water pump delivers a steady flow of water to your RV. Compared to other water pumps on the market, Flow Max delivers superior pressure performance, averaging 45 PSI with an average 3.30 gallons per minute water flow.
Similar items with 4 stars and above
Wort Transfer Pump,MRbrew 12V Solar Hot Water Circulation Pump Homebrew Beer Circulation Brushless Pumps Plastic W/Connector Brewing NPT 1/2"
- 100℃ liquid available, over heat protection, with solar panel drive
- Circulation pump is made of high quality material plastic for shell with 1/2″ female thread stainless steel connectors,extra 2 hose clamps
- With advanced electronic components and wear-resistant shaftmake it smooth operating, high efficiency, good performance and long working time .
- Apply to beer brewing,home solar water heating systems or other circulation pump application.
- Power Source: DC 12V(not include), Rated current: 0.7A, Brushless Motor, Low noise: 30db at 1 metre, Service life: 30000 hours up
Color: Black
Input Voltage: DC 12V
Input Power: 18W
Running Liquid Temperature: 0~100℃
Max. Head: 5M
Max. Flow: 9L/Min
Connector: NPT 1/2 pipe thread
DC Plug Type: 5.5 x 2.5mm
Applicative Power Adapter: DC 12V 2A or Above (not included)
Material: Plastic(pump shell), 304 Stainless Steel (connector)
Usage:
The direction of the arrow on the pump liquid flow flag.
Red line is the positive pole and black line is the negative pole.
The pump can be placed in any direction.
This price include two 1/2″” female thread Stainless Steel 304 Connector, which can be connected with 8-12mm hose.
Please Note:Do not let it work without liquid
Package Included:
1 x DC Brushless Pump
2 x 1/2″” Female Thread Stainless Steel Connectors
Camplux JK-3206P 12V Water Pump 6L/Min 65 PSI High Pressure Caravan Boat Gas Hot Water System
- SAVE YOUR TIME & MONEY – High efficiency with the 6L water pump.It’s easy to handle water pressure problem.Accessories complete, the pump can be used as soon as you get.
- WITH CE CERTIFICATION – This pump passed the CE certification, built-in overheating protection device, very safe.
- EASY TO INSTALL & USE- Contains a wealth of accessories.Easy to install and easy to use. Can be used for general water transfer, spraying, circulation, filtration, dispensing, small rain system, gas hot water system.
- 6L/Min 65 PSI – 1.6 gallons per minute (6.0 liters per minute)
- 1/2-inch hose barb ports.
- ACCESSORIES COMPLETE – Including all accessories you may need：1.1m alligator clip lead
- 6.8m cigarette socket lead with on/off switch
- 2m outlet garden hose
- 2m suction hose and filter.
What are The Benefits of Using Camplux Water Pressure Diaphragm Pump ?
1.It’s easy to set up the camplux pump with the supplied snap-on hose fittings.
2.Turn on the switch or connect the clip lead whenever you need to pump water.
3.Connect your pump by following the direction of water inlet and outlet.
4.Camplux pump ideal for use in any area that requires water transfer. Perfect for caravans, boats, motor homes and camping.
5.Excellent performance and long life. The mounting feet are rubber instead of rigid plastic, which provides fairly good vibration isolation.
6.We strongly recommend that you get this pump if you have had Camplux gas water heater!
7.There is an arrow on the pump that represents the direction of the water flow. Front side of pump (with explanatory label): The right side of the pump port is the water outlet, and the left side is the water inlet.
Specifications
Model: JK-3206P
Voltage : 12V
AMPS:6.0A max
DC Flow capacity : 1.6 GPM/6.0LPM
Water pressure: 65PSI
Item size: 7.4 x 3.9 inch
What You Will Get:
1 x 6L water pump
1 x 1.1m alligator clip lead for charging
1 x 6.8m cigarette socket lead with on/off switch
1 x 2m outlet garden hose for Camplux Pump
1 x 2m suction hose with filter
Tips
Intermittent work. Built-in thermal protector.A single continuous work 60-90 minutes, cooling 15-20 minutes to work again.
This pump can only be used to transfer water, DON’T connect pump to shower head or toilet outlet directly!
Don’t use pump in a flammable environment.
Don’t use to pump flammable or explosive fluids, including gasoline, fuel, oil, kerosene.
Inquiry & after sales service: [email protected]
Service hotline: (844)-538-7475
Brushless DC Water Pump uiet Mini DC 12V 12W Submersible Water Pump White Food Grade Brushless 3.5m Lift Head
- FEATURES: This food grade pump features a low noise design and operates in both hot and cold water environments.
- LONG LIFE EXPECTANCY: The silent mini DC pump has a long service life and has a working life of more than 20,000 hours in normal environments.
- LEAD WIRES: UL1007,AWG24,350mm,Red(+),Black(-)
- APPLICATION:aquarium,fountain,small fish pond,solar system radiators,water circulatory system，etc.
- SPECIFICATIONS: Input current: 1000ma；Voltage: 12V DC(max.)；Power: 12W(max.)；Flow temperature: 32-149℉；Flow: 7.5L/M（2.5 m3/h）；Speed: 4500r/m；Noise: ≤40dba；Inlet/outlet port: 1/2″；Level: Single
Conclusion
By our suggestions above, we hope that you can found hot water circulation pump 12v for you.Please don’t forget to share your experience by comment in this post. Thank you!
