The 10 Best Pentek Epm 10X25 Carbon Block Water Filter 25 Pack

Deal Score0
Deal Score0
  • The 10 Best Pentek Epm 10X25 Carbon Block Water Filter 25 Pack
  • The 10 Best Pentek Epm 10X25 Carbon Block Water Filter 25 Pack
  • The 10 Best Pentek Epm 10X25 Carbon Block Water Filter 25 Pack
  • The 10 Best Pentek Epm 10X25 Carbon Block Water Filter 25 Pack
  • The 10 Best Pentek Epm 10X25 Carbon Block Water Filter 25 Pack
  • The 10 Best Pentek Epm 10X25 Carbon Block Water Filter 25 Pack
  • The 10 Best Pentek Epm 10X25 Carbon Block Water Filter 25 Pack
  • The 10 Best Pentek Epm 10X25 Carbon Block Water Filter 25 Pack
  • The 10 Best Pentek Epm 10X25 Carbon Block Water Filter 25 Pack
  • The 10 Best Pentek Epm 10X25 Carbon Block Water Filter 25 Pack

Nowadays, there are so many products of pentek epm 10×2.5 carbon block water filter 25 pack in the market and you are wondering to choose a best one. You have searched for pentek epm 10×2.5 carbon block water filter 25 pack in many merchants, compared about products prices & reviews before deciding to buy them.

You are in RIGHT PLACE.

Here are some of best sellings pentek epm 10×2.5 carbon block water filter 25 pack which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.

23,445 Reviews Scanned
Rank
Product Name
Score
Rank
Product Name
Score
Rank
Product Name
Score
3
8.4
Score

$27.24$38.92$57.6

Rank
Product Name
Score
Rank
Product Name
Score
Rank
Product Name
Score
Rank
Product Name
Score
Rank
Product Name
Score

Pentek EPM-20BB Carbon Block Filter Cartridge, 20" x 4-5/8", 10 Microns

$28.76$41.09$53.83
Last update was on: Sunday, January 5, 2020

Color:White

This Pentek EPM-20BB carbon block filter cartridge reduces fine sediment and chlorine taste and odor in residential and commercial drinking water. It has a nominal (85%) filtration rating of 10 microns. The filter will reduce free available chlorine (FAC) at 2 parts per million (ppm) by at least 90% in up to 30,000 gallons at a flow rate of 4 gallons per minute (gpm). This cartridge is made of bonded powdered activated carbon (PAC) filter media wrapped in polyolefin with polyethylene outer netting. The nitrile butadiene rubber (Buna-N) gaskets seal the cartridge against the housing (sold separately). The cartridge has an initial pressure drop of 4 pounds per square inch (psi) at a flow rate of 4 gallons per minute (gpm), and operates over a temperature range of 40 to 180 degrees F (4.4 to 82.2 degrees C). This carbon block filter cartridge meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is used for purification of residential and commercial drinking water.

Specifications

Nominal filtration rating 10 microns
Initial pressure drop at 4 gpm 4 psi
Chlorine reduction capacity 30,000 gallons at 4 gpm
Temperature range 40 to 180 degrees F (4.4 to 82.2 degrees C)
Maximum dimensions (H x W) 20 x 4-5/8 inches (508 x 118 mm)
Materials certification NSF/ANSI standard 42

The nominal filtration rating is for a particle removal efficiency of 85%. Chlorine reduction capacity is the minimum total amount of water for which the free available chlorine (FAC) at a concentration of 2 ppm is reduced by at least 90%.

H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.

Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.

Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.

Similar items with 4 stars and above

Pentek EP-20BB Carbon Block Filter Cartridge, 20" x 4-5/8", 5 Microns

$32.91$47.02$69.12
Last update was on: Sunday, January 5, 2020

Size:20″ H x 4-5/8″ W

This Pentek EP-20BB carbon block filter cartridge reduces fine sediment and chlorine taste and odor in residential and commercial drinking water. It has a nominal (85%) filtration rating of 5 microns. The filter will reduce free available chlorine (FAC) at 2 parts per million (ppm) by at least 90% in up to 40,000 gallons at a flow rate of 4 gallons per minute (gpm). This cartridge is made of bonded powdered activated carbon (PAC) filter media wrapped in a polyolefin pre-filter with polyethylene outer netting. The nitrile butadiene rubber (Buna-N) gaskets seal the cartridge against the housing (sold separately). The cartridge has an initial pressure drop of 5.5 pounds per square inch (psi) at a flow rate of 5 gallons per minute (gpm), and operates over a temperature range of 40 to 180 degrees F (4.4 to 82.2 degrees C). This carbon block filter cartridge meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is used for purification of residential and commercial drinking water.

Specifications

Nominal filtration rating 5 microns
Initial pressure drop at 5 gpm 5.5 psi
Chlorine reduction capacity 40,000 gallons at 4 gpm
Temperature range 40 to 180 degrees F (4.4 to 82.2 degrees C)
Maximum dimensions (H x W) 20 x 4-5/8 inches (508 x 118 mm)
Materials certification NSF/ANSI standard 42

The nominal filtration rating is for a particle removal efficiency of 85%. Chlorine reduction capacity is the minimum total amount of water for which the free available chlorine (FAC) at a concentration of 2 ppm is reduced by at least 90%.

H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.

Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.

Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.

Similar items with 4 stars and above

Pentek RFC20-BB Carbon Filter Cartridge, 20" x 4-1/2"

$27.24$38.92$57.6
Last update was on: Sunday, January 5, 2020

Pentek 155141, RFC-BB Radial-Flow Granular Activated Carbon Cartridge, 25 Micron

$20.02$28.6$32.32
Last update was on: Sunday, January 5, 2020

Size:1-Pack

The Pentek 155141, RFC-BB Radial-Flow Granular Activated Carbon Cartridge Filters out chlorine and odor from drinking water. The filters has the best flow rate in it’s size and a capacity of 35, 000 gallons.

Similar items with 4 stars and above

Pentek EPM-10 Carbon Block Filter Cartridge, 9-3/4" x 2-7/8", 10 Microns

$3.58$5.12$6.4
Last update was on: Sunday, January 5, 2020

Color:White

This Pentek EPM-10 carbon block filter cartridge reduces fine sediment and chlorine taste and odor in residential and commercial drinking water. It has a nominal (85%) filtration rating of 10 microns. The filter will reduce free available chlorine (FAC) at 2 parts per million (ppm) by at least 90% in up to 3,000 gallons at a flow rate of 1 gallon per minute (gpm). This cartridge is made of bonded powdered activated carbon (PAC) filter media wrapped in polyolefin with polyethylene outer netting. The nitrile butadiene rubber (Buna-N) gaskets seal the cartridge against the housing (sold separately). The cartridge has an initial pressure drop of 1.5 pounds per square inch (psi) at a flow rate of 1 gallon per minute (gpm), and operates over a temperature range of 40 to 180 degrees F (4.4 to 82.2 degrees C). This carbon block filter cartridge meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is used for purification of residential and commercial drinking water.

Specifications

Nominal filtration rating 10 microns
Initial pressure drop at 1 gpm 1.5 psi
Chlorine reduction capacity 3,000 gallons at 1 gpm
Temperature range 40 to 180 degrees F (4.4 to 82.2 degrees C)
Maximum dimensions (H x W) 9-3/4 x 2-7/8 inches (248 x 73 mm)
Materials certification NSF/ANSI standard 42

The nominal filtration rating is for a particle removal efficiency of 85%. Chlorine reduction capacity is the minimum total amount of water for which the free available chlorine (FAC) at a concentration of 2 ppm is reduced by at least 90%.

H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.

Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.

Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.

Similar items with 4 stars and above

Pentek EPM-20 Carbon Block Filter Cartridge, 20" x 2-7/8", 10 Microns

$9.51$13.58$16.16
Last update was on: Sunday, January 5, 2020

Size:20″ x 2-7/8″, 10 Microns

This Pentek EPM-20 carbon block filter cartridge reduces fine sediment and chlorine taste and odor in residential and commercial drinking water. It has a nominal (85%) filtration rating of 10 microns. The filter will reduce free available chlorine (FAC) at 2 parts per million (ppm) by at least 90% in up to 6,000 gallons at a flow rate of 2 gallons per minute (gpm). This cartridge is made of bonded powdered activated carbon (PAC) filter media wrapped in polyolefin with polyethylene outer netting. The nitrile butadiene rubber (Buna-N) gaskets seal the cartridge against the housing (sold separately). The cartridge has an initial pressure drop of 1.0 pounds per square inch (psi) at a flow rate of 2 gallons per minute (gpm), and operates over a temperature range of 40 to 180 degrees F (4.4 to 82.2 degrees C). This carbon block filter cartridge meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is used for purification of residential and commercial drinking water.

Specifications
Nominal filtration rating 10 microns
Initial pressure drop at 2 gpm 1.0 psi
Chlorine reduction capacity 6,000 gallons at 2 gpm
Temperature range 40 to 180 degrees F (4.4 to 82.2 degrees C)
Maximum dimensions (H x W) 20 x 2-7/8 inches (508 x 73 mm)
Materials certification NSF/ANSI standard 42

The nominal filtration rating is for a particle removal efficiency of 85%. Chlorine reduction capacity is the minimum total amount of water for which the free available chlorine (FAC) at a concentration of 2 ppm is reduced by at least 75%.

H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.

Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.

Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.

Brita Extra Large 18 Cup UltraMax Water Dispenser and Filter – BPA Free – Black

$19.92$28.46$42.12
Last update was on: Sunday, January 5, 2020

Style Name:Standard Filter |  Color:Black

Drink healthier, great-tasting water with this BPA free Brita 18 Cup UltraMax Water Dispenser. The extra large capacity makes this water filtration system perfect for busy families, sports teams and offices, while a new, sleek, space efficient design allows for convenient storage. A flip top lid makes refilling a breeze. Plus, just a glance at the filter indicator lets you know when it is time to change the Brita water filter. This filtered water dispenser comes with 1 water filter and delivers great tasting water in every pour.

Brita Large 10 Cup Everyday Water Pitcher with Filter – BPA Free – White

$18.89$26.99$38.06
Last update was on: Sunday, January 5, 2020

Drink healthier, great tasting tap water with this BPA free Brita 10 cup water pitcher. With the Advanced filter technology, Brita cuts the taste and odor of chlorine to deliver great tasting water, and is certified to reduce copper, cadmium and mercury impurities, which can adversely affect your health over time. The Brita water pitcher’s flip top lid makes refilling a breeze and just a glance at the sticker filter indicator lets you know when it is time to change the Brita replacement filter. This large water pitcher comes with 1 water filter, which should be changed every 40 gallons or about 2 months for best results. Start drinking healthier, great tasting water with Brita today.

8-Pack of Baleen Filters 20" x 2.5" 10 Micron Coconut Shell Performance Carbon Filter Cartridge Replaces Hydronix CB-25-2010, Pentek CEP-20E, EPM-20

$45.34$64.77$71.89
Last update was on: Sunday, January 5, 2020

Size:08 Pack

This Baleen Filters 8-Pack containing the high quality RJPAC-10-20 performance carbon filter cartridge that is 20″ in length and 2.5″ in diameter. Designed to replace the Hydronix CB-25-2010, , Pentek CEP-20E, EPM-20 and other similar products, the RJPAC-10-20 is engineered to fit into most filter housings that accept a 20″ x 2.5″ filter cartridge.

This high performance coconut shell carbon filter cartridge is engineered for reduction of chlorine, color, fowl odors, certain VOC’s, and sediment particals larger than 10 Micron. Exceeding industry standards with chlorine reduction rates of 1000. Keeping your system up longer with higher flow rates and lower pressure drops. The Baleen Filters RJPAC-10-20 carries an NSF certification granting our customers “Peace of Mind”, that when selecting and using this product, there is no question of the specifications listed and the RJPAC-10-20 will provide crystal clear and great tasting water.

8-Pack of Baleen Filters 10" x 2.5" 10 Micron Coconut Shell Performance Carbon Filter Cartridge Replaces Hydronix CB-25-1010, Pentek EPM-10

$30.17$43.1$59.91
Last update was on: Sunday, January 5, 2020

Size:08 Pack

This Baleen Filters 8-Pack containing the high quality RJPAC-10-10 performance carbon filter cartridge that is 10″ in length and 2.5″ in diameter. Designed to replace the Hydronix CB-25-1010, , Pentek EPM-10 and other similar products, the RJPAC-10-10 is engineered to fit into most filter housings that accept a 10″ x 2.5″ filter cartridge.

This high performance coconut shell carbon filter cartridge is engineered for reduction of chlorine, color, fowl odors, certain VOC’s, and sediment particals larger than 10 Micron. Exceeding industry standards with chlorine reduction rates of 1000. Keeping your system up longer with higher flow rates and lower pressure drops. The Baleen Filters RJPAC-10-10 carries an NSF certification granting our customers “Peace of Mind”, that when selecting and using this product, there is no question of the specifications listed and the RJPAC-10-10 will provide crystal clear and great tasting water.

Conclusion

By our suggestions above, we hope that you can found pentek epm 10×2.5 carbon block water filter 25 pack for you.Please don’t forget to share your experience by comment in this post. Thank you!

10 Total Score
Excellent

Best pentek epm 10x2.5 carbon block water filter 25 pack: Top-Rated Brands & What to Buy

User Rating: 4.93 (625 votes)