The 10 Best Home Hot Water Heater Natural Gas

Product Description

Rinnai’s V65E exterior-mount tankless water heater efficiently delivers up to 6.6-Gallon per minute (GPM) of hot water, making it perfect for your one to two and half bathroom home. This easy-to-install, ultra-compact unit lets you enjoy all the benefits of Rinnai tankless water heating. You’ll experience clean, reliable hot water at a consistent pre-set temperature, while saving energy and precious floor space in your home.

From the Manufacturer

Rinnai’s V65E exterior-mount tankless water heater efficiently delivers up to 6.6-Gallon per minute (GPM) of hot water, making it perfect for your one to two and half bathroom home. This easy-to-install, ultra-compact unit lets you enjoy all the benefits of Rinnai tankless water heating. You’ll experience clean, reliable hot water at a consistent pre-set temperature, while saving energy and precious floor space in your home.

Product Description

Features ENERGY STAR Qualified Energy Factor of .82 for Natural Gas and Propane Certified for Installation in Manufactured (Mobile) Homes Leak detection shuts off water to unit to limit property damage Enhanced scale detection lessens possibility of serious, long-term damage to unit Temperature lock prevents accidental or unauthorized changes to water temperature Complies with South Coast Air Quality Management District 14 ng/J or 20 ppm NOx emission levels Rinnai Value Series Tankless Water Heater Product Warranty Dimensions Width: 14 Inches Height: 23 Inches Depth: 9 Inches Weight 45.6 Pounds Ignition Direct Electronic Hot Water Capacity 0.26 to 6.6 GPM Minimum Activation Rate 0.4 GPM Minimum/Maximum Gas Rate (Input BTUs ) 10,300 150,000 Energy Factor 0.82 for Natural Gas and Propane Energy Star Yes Approved Gas Types Natural Gas or Propane Temperature Settings 98F – 140F with MC-91-2US 98F – 160F with MCC-91-2US Type of Controller MC-91-2US (included) MCC-91-2US (optional for Hydronic Applications) MC-100V-1US Deluxe Controller (optional) BC-100V-1US Bathroom Controller (optional) Ultra Lox NOx Yes Electrical AC 120 Volts, 60 Hz Electrical Consumption Normal: 76 Watts Standby: 2 Watts Anti-Frost Protection: 120 Watts Service Connections Gas Supply: 3/4 Inch MNPT Cold Water Inlet: 3/4 Inch MNPT Hot Water Outlet: 3/4 Inch MNPT. Turn off gas supply and 120 V power supply

From the Manufacturer

Features ENERGY STAR Qualified Energy Factor of .82 for Natural Gas and Propane Certified for Installation in Manufactured (Mobile) Homes Leak detection shuts off water to unit to limit property damage Enhanced scale detection lessens possibility of serious, long-term damage to unit Temperature lock prevents accidental or unauthorized changes to water temperature Complies with South Coast Air Quality Management District 14 ng/J or 20 ppm NOx emission levels Rinnai Value Series Tankless Water Heater Product Warranty Dimensions Width: 14 Inches Height: 23 Inches Depth: 9 Inches Weight 45.6 Pounds Ignition Direct Electronic Hot Water Capacity 0.26 to 6.6 GPM Minimum Activation Rate 0.4 GPM Minimum/Maximum Gas Rate (Input BTUs ) 10,300 150,000 Energy Factor 0.82 for Natural Gas and Propane Energy Star Yes Approved Gas Types Natural Gas or Propane Temperature Settings 98F – 140F with MC-91-2US 98F – 160F with MCC-91-2US Type of Controller MC-91-2US (included) MCC-91-2US (optional for Hydronic Applications) MC-100V-1US Deluxe Controller (optional) BC-100V-1US Bathroom Controller (optional) Ultra Lox NOx Yes Electrical AC 120 Volts, 60 Hz Electrical Consumption Normal: 76 Watts Standby: 2 Watts Anti-Frost Protection: 120 Watts Service Connections Gas Supply: 3/4 Inch MNPT Cold Water Inlet: 3/4 Inch MNPT Hot Water Outlet: 3/4 Inch MNPT

Saves energy, saves water! Marey Power Gas 10L Tankless Water Heater requires NO electricity to deliver endless hot water! It’s simple to install and requires no electricity to operate. Energy-saving design heats up in seconds and uses gas only while water is flowing. Available in LP and natural gas models. Adjustable gas and water controls; Electric pulse ignition powered by 2 D-cell batteries (not included); Activates by water flow when faucet is turned on; Rust-proof… no water loss due to leaks; Anti-combustion and gas pressure safety protection; Works easily with low levels of water pressure; Applicable water pressure: 3.6 – 145.0 psi; Hot water output per minute: 3.1 gallons; Energy efficiency: 54% – 87%; Exhaust discharge mode: Flue duct type; Gas Types: Liquid Propane Gas, Natural Gas; Dimensions: Approx. 24″ x 14″ x 7″; Weight: Approx. 21 lbs.; Mfg. Number: GA10LP (Liquid Propane Gas), GA10NG (Natural Gas); Marey Gas 10L Tankless Water Heater

With an enhanced combustion design, the Rinnai sensei tankless water heater provides a better experience for both users and installers. Like all Rinnai tankless water heaters, it’s also vertically integrated. That means all key components are manufactured by Rinnai — to ensure Rinnai quality.

Product Description

This Smart Technology electric tankless water heater is configured as a “whole home” model for climates where incoming water temperature is 67°F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67°F and an output setting of 105°F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. All tankless water heaters are sized based on flow rate and temperature rise, and there is a direct relationship between the two. So if used in a cold area requiring a high temperature rise, it will be more limited in the amount of fixtures (gallons per minute) it can heat at one time compared to a warmer climate. When sized properly this water heater will provide endless hot water and only consume the energy needed, giving the user complete control. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The ECO 11 requires a minimum 125 amp electrical panel for installation with (1) 60 amp double pole breaker connected to (1) set of #6 awg wire. Plumbing connections are 1/2″ compression fitting with the option of 1/2″ NPT adapter included. For additional assistance please feel free to contact our support center at 877-474-6473.

NOTE : 11Kw at 220 is equal to 13kw at 240.

From the Manufacturer

This Smart Technology electric tankless water heater is configured for climates where incoming water temperature is 67 Degree F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67 Degree F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.

Enjoy an endless supply of hot water with this high efficiency non-condensing natural gas tankless water heater from Rinnai. Only the size of a small suitcase, the RL75eN is compact, easy-to-install, reliable and perfect for outdoor locations. Rinnai products provide peace of mind with warranties that surpass the competition.

Rinnai takes tankless water heating one step further with condensing technology that delivers more efficiency than ever before. Enjoy all the same tankless benefits you’ve come to expect from Rinnai, plus even greater energy savings. Features: 95% Thermal Efficiency Natural gas or propane Indoor Installation Only 98° F to 140° F Residential Temperature Range 98° F to 185° F Commercial Temperature Range Commercial Controller Must be Purchased Separately Gas Rate Input BTU’s: 15,200 – 199,000 Electronic Ignition Meets California and Texas NOx Emissions Standards Compatible with Full Line of Rinnai Digital Controllers 12-Year Warranty on Heat Exchanger, 5 Year Parts, 1 Year Labor for Residential Installations Specifications: Width: 18.5″ Height: 26″ Depth: 10″ Weight: 61.7 lbs Gas Connection: 3/4″ Water Connection: 3/4″

Fire Catching Ways: Electricity pulse automatic fire catching
Discharge Ways: Flue automatic gas discharge
Applicable water pressure :Zero pressure starting
Cold water / Warm water connection: G1/2” tube
NPT 1/2″ female to G 1/2″ male
Gas inlet: G1/2”
Vent Type:4.3″ Flue Duct
Automatic ignition system, Flame failure protection device
Water & gas combination unit ,Fitted with over heating and pressure safeguard
20 min. off self-timer
Mains power not required
Electrical requirement: DC3V, Automatic electric ignition powered by two (2) size ‘D’ batteries (batteries not included); No electrical hook up; No standing pilot
Gross weight: 9.5KG
Description:
1. High efficient energy saving : the heater exchanger and main burner adopt mostly advanced energy-saving and combustion technology to decrease gas consumption and burning noise.
2. Low water-pressured startup : the water control linkage valve makes the heater start up under low water pressure and shortage areas and those living in high stairs.　
3. Manifold auto protection : for the sake of your safety　
4. Ion flame inspection : to automatically shut down gas power under unexpected flameout.　
5. Over water pressure protection function : to automatically decrease pressure under excessive high water pressure.
6. Controller design : both cold water and warm water can be properly controlled
7. Magnificent thin-shaped appearance : it is designed by modern fashionable line shape.
Attention:
We have adapters which can convert G thread connector to NPT connector (not include in the list) ,if you need ,please search ASIN: B01N03LFUF on our store.

Product Description

With gas inputs of 199,000 BTU, the T-H3 can produce enough hot water for four bathrooms in warmer climates or three baths in colder climates.

From the Manufacturer

With gas inputs of 199,000 BTU, the T-H3 can produce enough hot water for four bathrooms in warmer climates or three baths in colder climates.

Product Description

Our high-efficiency plus RL models, offer Rinnai’s most advanced technology in non-condensing tankless water heaters. You’ll enjoy the endless hot water and energy savings you expect, with the addition of Wi-Fi monitoring and recirculation technology for faster hot water delivery.

From the Manufacturer

The R94LSi lets you enjoy continuous hot water for up to five plumbing and appliance outlets simultaneously and always at a consistent, pre-set temperature. With a capacity of up to 9.4 gallons of hot water per minute (GPM), the R94LSi still delivers up to 40% energy savings and significant space savings. This compact, interior-mount unit vents directly to the outside with a concentric venting system.

Conclusion

By our suggestions above, we hope that you can found home hot water heater natural gas for you.Please don’t forget to share your experience by comment in this post. Thank you!